777
products
Products
1/2"Dr. 70-350 Nm Torque Wrench, 51395
1/2"Dr. 70-350 Nm Torque Wrench, 51395
Description:
Heavy-duty 1/2" drive torque wrench with a 70-350 Nm range.
Features ±4% accuracy, a 45-tooth reversible ratchet, and a knurled aluminum handle.
Made in China
80-120 mm Heavy Duty 3-Jaw Oil Filter Wrench, 51423
80-120 mm Heavy Duty 3-Jaw Oil Filter Wrench, 51423
Professional heavy-duty 3-jaw wrench designed for easy removal and installation of oil filters ranging from 80mm to 120mm.
Made in China
Dial Bore Gauge 50-160mm– Precision Measurement Tool, 51404
High-precision dial bore gauge with a range of 50-160mm and 0.01mm graduation. Ideal for measuring internal diameters, cylinder taper, and out-of-roundness. Includes a set of interchangeable anvils and spacers in a protective case.
Engine/ Gearbox Support, 51401
Professional universal engine and gearbox support. Ideal for under-vehicle work on a lift during clutch, timing belt, or transmission replacement. Provides stability, precise adjustment, and complete freedom of movement within the engine compartment. High-quality heavy-duty tool designed for professional automotive workshops.
Brake Disc & Wheel Hub Run-out Measurement Kit, 51397
Description: Professional Brake Disc Run-out Kit designed for measuring axial run-out of brake discs and wheel hubs. Features a high-precision DTI dial indicator (0.01mm) and a flexible arm with heavy-duty locking pliers for stable mounting on suspension components.
Purpose: Specifically designed to diagnose brake pedal pulsation and steering wheel wobble. It allows mechanics to measure the lateral run-out of brake discs and wheel hubs directly on the vehicle to determine if a disc needs resurfacing or replacement.
Magnetic Base with Fine Adjustment, 51398
Purpose: Designed for holding dial indicators and lug back indicators during precision measurements. Ideal for checking the alignment of machine tools, measuring run-out on shafts, and general workshop inspection where a stable, switchable magnetic mount is required.
Electrical Circuit Tester 6-24V, 51361
This multifunctional MAGMA automotive circuit tester is an essential tool for diagnosing the electrical systems of cars, trucks, boats, motorcycles, and trailers operating between 6V and 24V DC. It is equipped with a bright LED indicator to show polarity (red for positive, green for negative) and an audible alert. The tool features sensitive short-circuit protection (fuse/breaker) for safe use around a vehicle's sensitive electronics and an extended cable (typically around 4 meters) to reach all corners of the vehicle from a single battery connection.
Internal and External Thread Restorer File (Metric), 51341
This Thread Restorer File is an essential tool for any mechanic or technician, designed to quickly repair damaged internal and external metric threads. Unlike standard taps and dies, this file can be used on any diameter bolt or hole, making it highly versatile. It features 8 different thread pitches on a single tool.
- Materials: Made from high-quality heat-treated alloy steel for maximum durability.
- Application: Works on both left and right-hand threads.
- Pitch Sizes: 0.75, 1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 3.00 mm.
- Key Benefit: Ideal for cleaning rusted or corroded threads in hard-to-reach areas.
Made in China
Rechargeable LED headlamp with dual CCT sensor, 75134
Rechargeable LED Headlamp with Dual CCT Sensor, 75134
Max. 550 lm, 8W COB LED, 4000K and 7000K.
Mode: 7000K COB 100%; 4000K COB 100%; 4000K & 7000K COB 100%
Operating time from 2.5 to 4 hours.
Charging time 3 hours.
1 × Li-battery 3.7 V, 1800 mAh
IP 44.
Type-C connector
Origin: China
Combustion Gas Leak Tester Kit, 51111
Combustion Gas Leak Tester Kit, 51111
Designed for testing the presence of CO² in the cooling system.
CO² in the cooling system can indicate a cylinder head gasket leak, cracked block, warped head, etc.
For use on water-cooled petrol and diesel engines.
Set contains:
1x Leak Detector
1x Rubber Bulb Pump
1x Release Valve and Connector
3x Cooling System Bayonet Adapter
2x Empty Bottle (250 ml)
Made in China
14mm 1/2"Dr Injection Line socket, 50802-14
14mm 1/2"Dr Injection Line socket, 50802-14
Set of special open twelve-walled keys for unwinding and turning the nuts of the high pressure tubes to the fuel nozzles or the pump.
Suitable for BMW Diesel engines
Material: Cr-V
Size: 14 mm
Made in China
510 mm (20") 1/2 "Dr. Extension bar, 50001
510 mm (20") 1/2 "Dr. Extension bar, 50001
Lenght: 510 mm
Drive: 1/2” Dr.
Material: Cr-V
Made in China
280 mm (11") 1/4 "Dr. Extension bar, 50001B
280 mm (11") 1/4 "Dr. Extension bar, 50001B
Lenght: 280 mm
Drive: 1/4” Dr.
Material: Cr-V
Made in China
Water Pump Tester Kit, 51125
Water Pump Tester Kit, 51125
Features:
For testing the function of mechanically driven cooling system water pumps when the engine is running.
Helps identifying pump issues due to damaged impellers, seized impeller shafts or drive slippage on water pump belts.
Contents:
Guage 0-15psi
2 pcs rubber pipe seals,
2 pcs pipe connector body made of Aluminium,
2 m Nylon hose
Connector with Male thread
Made in China
9 Pcs Turbo System Tester Set, 51103
9 Pcs Turbo System Tester Set, 51103
Features: Designed to check leakage in the turbo system as pressure hoses, charge air coolers, etc. using a air compressor.
Helps locate air leaks in turbine system components by blocking the output side and air intake of the turbine.
Pressure gauge with shut-off valve and regulator to prevent overpressure.
Suitable for most turbo vehicles: Includes 4 pairs of stepped plugs for clogging intake and exhaust hoses.
Contents: Filling fitting with pressure gauge 0-70 psi (0-5 bar), suitable for the following hose sizes: 35 - 40 - 45 - 50 - 55 - 60 - 65 - 70 - 75 - 80 - 85 - 90 mm
Made in China
