Magma

3/4" Dr. 36mm 12-Point Crowfoot Spanner Wrench, 51353

Premium 36mm Crowfoot wrench with a 12-point (bi-hex) profile and 3/4" square drive. Specifically designed for working with plumbing and pipe connections in restricted spaces.

Made in China

Opel / Vauxhall 1.0, 1.4, 1.5 Petrol - Engine Timing Tool Set, 51297

Comprehensive timing kit for Opel / Vauxhall 1.0, 1.4, and 1.5 Turbo and Naturally Aspirated engines.

Fits Astra-K, Corsa-E, and Insignia-B.

Made in China

Fork type ball joint separator 28 mm, 50434-3

28 mm ball joint fork – quickly and safely separates ball joints in cars and machinery.
Used to remove tie rod ends, Pitman arm, and ball joint.

Made in China

1/2" Drive Torque Wrench 60 - 330Nm, T0001

Torque range: 60 - 330Nm (44.3 - 243.5lbf-ft).
Scale: 1.5Nm / 1.1lbf-ft.
Accuracy: ±3%.
Reversible ratchet mechanism with 72 teeth.
Aluminium knurled handle for comfort and control.
Length: 575mm.

Made in China

10L Metal Fuel Can, 75087

Ideal for the storage of petrol and diesel.
Made from thick 0.8mm steel
Capacity: 10 L
Size: 280 (L) x 135 (W) x 410 (H) mm
Weight: 2.320 kg

Made in China

Pull Camp Car Body Alignment Tool (2-way), 51160

Bolt size M14×120mm
Claw width: 35mm
Overal length: 230mm.
One way pulling max 3 t
Side way pulling max. 1 t
Weight: 2 kgs

Made in China

The VAG 3-Pin Brake Piston Wind Back Tool 50161 is an indispensable tool for servicing rear brake calipers on VAG models with an electronic park brake. After retracting the electronic park brake mechanism (software controlled), use this adapter with a wind back tool to reset caliper pistons for new pad installation.

Key Features:

• Essential for VAG models with electronic park brakes.
• 3/8"Dr. and two pin drive option for flexibility.
• Compatible with Renault Megane, Scenic, and Volvo models.
• Outside diameter: 39mm.

T25H Extra Long Screwdriver 300mm, 50779C

Magnetic tip screwdriver
With Slip-Not ergonomic soft grip handle.
For use on both Tamper Proof and standard Torx screws.
The long length is ideal for hard to reach screws.
Material: S2 steel.
Blade length: 300mm
Overal length: 400mm
Blade Tip: T25H.

7 Piece Pressure Loss Testing Kit, 50503

For checking pressure tightness of single cylinders on Diesel and gasoline engines.
Includes:
Dial indicator
M12 x 1.25 mm adaptor for motorbikes
M10 x 1.00 mm adaptor for motorbikes
M24 x 2 mm adaptor for diesel engines
M12 x 1.25 mm adaptor with 7 mm hole for VW diesel engine
Adaptor for multi valve engines
Adaptor for M14 x 1.25 and M18 x 1.5 mm
Working pressure: 6 - 12 bar
Maximum pressure 6.8 bar / 100 PSI.
Note: Before connecting to compressed air system the adjusting valve must be closed.Connect the device to the compressed air system and open the adjusting valve slowly until the pointer reaches the 0-mark.

Made in China

64 Pcs Oil Drain Plug Thread Repair Set, 50324

Application:
For Repairing Sump, Gearbox Drain Plug Tool Set
A comprehensive thread repair kit ideal for repairing sump, gearbox and differential drain plug threads.Used to tap the damaged thread slightly over size, then fit a new drain plug and washer supplied.
Set is suitable for the most popular threads used on cars and light commercial vehicles.
Tap Sizes:
M13 x 1.5, M15 x 1.5, M17 x 1.5, M20 x 1.5mm
Taps material: Chrome Vanadium

Made in China

Magnetic tray Ø 100 mm, 50934

Size: Ø 100 mm

Made in China

190mm Penuamtic air hammer with 4 Round/Hex Chisel Shank, 93969

Features:
Heavy duty
Super power for car tire maintenance & assembly line
Specification:
Chisel shank: 0.401(0.410)
Bore diameter: 3/4"(19.05mm)
Piston stroke: 2-5/8"(66mm)
Blow per min.:3500
Air inlet: 1/4"
N.W.: 1.44 kgs

Made in China

131 pcs Thread repair kit

This thread repair kit creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads. Protects tapped threads This thread repair kit creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads.
Protects tapped threads against wear and damage.
Set includes drill bits, thread taps, insert installations (heli-coil) and lug breaking tools.
The set comes with extra long inserts that can be cut down to the size you need using a pair of side cutter, so you always get the correct size insert you need.
Made by professionals for professionals.
Specifications:
• Thread repair kit for M5 - M12
• Creates a stronger internal thread in soft metals.
• Ideal for repairing damaged or stripped internal threads.
• Protects tapped threads against wear and damage.
• Includes drill bits, thread taps, insert installations and lug breaking tools.
• Supplied with three different lengths of thread insert.
• Thread insert (helicoil) lengths: M5 x 0.80 - 6.7mm L, M6 x 1.0 - 8.00mm L, M8 x 1.25 - 10.8mm L M10 x 1.5 - 13.5mm L, M12 x 1.75 - 16.3mm L
• Drill bits, thread taps and lug breaking tools match the sizes above

1/2" Dr. 32mm 12-Point Crowfoot Spanner Wrench, 51352

Premium 32mm Crowfoot wrench with a 12-point (bi-hex) profile and 1/2" square drive. Specifically designed for working with plumbing and pipe connections in restricted spaces.

Made in China

Jeep 3.0 V6 Diesel - Engine Timing Tool Set, 51097

Professional engine timing kit for Jeep 3.0 V6 CRD / Multijet diesel engines.

Compatible with Grand Cherokee, Chrysler 300C, and Lancia Thema.

Made in China