Magma

The Hydraulic Extractor and Installer Set 51334 simplifies the removal and installation of bearings and seals from Ø18 to Ø60 mm. Its hydraulic cylinder connects to a hand or foot pump. This set includes 22 short sleeves (40mm) and 22 long sleeves (110mm) with windows to prevent over-installation. Also included are 4 spindles for common center hole sizes and an 18-ton hydraulic cylinder.

• Wide Application: Suitable for bearings and seals from Ø18 to Ø60 mm.
• Hydraulic Power: Simplifies removal and installation tasks.
• Comprehensive Set: Includes short and long sleeves, spindles, and a hydraulic cylinder.

Equip yourself with the comprehensive 61-Piece 3/8" Drive Socket Set, engineered for durability and versatility. Crafted from high-quality chrome vanadium steel, this set ensures long-lasting performance and reliability for all your projects.

This extensive set includes:

• 18 Standard Sockets: (6-24mm)
• 10 Deep Sockets: (8-19mm)
• 25 Bit Sockets: (Torx, Phillips, Pozidriv, Slotted, Hexagon)
• 72-Tooth Ratchet Handle

Enhance your toolkit with this essential socket set, perfect for both professional mechanics and DIY enthusiasts. Get yours today and experience the convenience and quality of a complete socket solution!

21 Pcs 1/4" Drive Torque Wrench Set 1 - 25Nm, 51278

Ideal for precise screws and nuts installation.

Sockets material: Cr-V steel
Bits material: S2 steel
Torque range: 1 - 25Nm (0.7 - 18.5lbf-ft).
Scale: 0.2Nm / 0.15lbf-ft.
Accuracy: ±3%.
Drive Square Size: 1/4"
Contains:
Torque Wrench 1 - 25Nm, 72 teeth
Universal Joint
Extension Bar 100mm
Adapter 1/4"F x 3/8"M
17x Bit Sockets1/4”Dr:
Phillips: PH1, PH2, PH3
Hex (37mm): H2, H2.5, H3, H4, H5, H6, H8, H10
Hex (62mm): H5
Torx (37mm Length): T10, T15, T20, T25, T30

Made in China

20L Metal Fuel Can, 75088

Ideal for the storage of petrol and diesel.
Made from thick 0.8mm steel
Capacity: 20 L
Size: 350 (L) x 170 (W) x 470 (H) mm
Weight: 3.640 kg

Made in China

One way Heavy Duty Pull Clamp, 51159

Bolt size: M20x120 mm
Claw width: 45 mm
Overal lenght: 230 mm
One way pulling max 5 t
Weight: 3 kgs

Made in China

T20H Extra Long Screwdriver 300mm, 50779B

Magnetic tip screwdriver
With Slip-Not ergonomic soft grip handle.
For use on both Tamper Proof and standard Torx screws.
The long length is ideal for hard to reach screws.
Material: S2 steel.
Blade length: 300mm
Overal length: 400mm
Blade Tip: T20H.

Thread repair set M5x0.8, 50725A

Features:
This thread repair kit creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads.
Protects tapped threads against wear and damage.
Set includes drill bit, thread tap, insert installations (heli-coil - 10 pcs) and lug breaking tool.
Size: 5x0,8

Made in China

Air Body Saw 93970
It is used for cutting and shaping of a wide range of metal and plastic materials.
Cast aluminum body.
Rubber handle with ergonomic grip.
Speed and cutting efficiency.
Application: For cutting through rods, pipes, bars and even 16 gauge sheet metal with speed and efficiency

Technical Data:
Stroke per minute: 10000 spm
Stroke Lenght: 8-10 mm
Cutting capacity (steel): 1.5 mm)
Cutting capacity (aluminum): 2.0 mm
Air Pressure: 6 Bar
Air Inlet: 1/4”
Air Hose: 3/8" (I.D.)
Avg.Air Consumption: 4 cfm (114 l/min.)
N.W.: 0.65 kgs

114 pcs Oil Drain repair kit, 50628
A comprehensive thread repair kit ideal for repairing sump, gearbox and different drain plug threads.
Used to tap the damaged thread slightly over size, then fit a new drain plug and washer (supplied).
Applicable for: Audi, BMW, Citroen, Daimier-Benz, Ford, Fiat, Honda, Mazda, Mitsubishi, Nissan, Opel, Peugeot, Porshe , Renault, Saab, Seat, Skoda, Toyota, Volvo, VW.

1/2" Dr. 27mm 12-Point Crowfoot Spanner Wrench, 51351

Premium 27mm Crowfoot wrench with a 12-point (bi-hex) profile and 1/2" square drive. Specifically designed for working with plumbing and pipe connections in restricted spaces.

Made in China

BMW Final Drive Input Shaft Socket 37 Splines, 51440

Specialized socket for holding the rear axle final drive input shaft when loosening/tightening the flange nut. Fits BMW RWD/4WD.

Made in China

Suspension Split Hub Knuckle Spreader, 51305

Features:
A compact hub clamp spreader tool designed to allow the suspension split hub to be held open to make the removal and fitting of the suspension strut easier.
Suitable for use on various BMW, Citroen, Ford, Peugeot and VW Group models, the double ended design allows it to be used on larger upper split hubs together with lower ball joint split hubs without the risk of damage.
For removal and fitting of suspension struts whilst leaving the hub on the vehicle.
Double ended action allows use on both larger upper split hubs and lower ball joint split joints.

Applications include: Audi, BMW, Citroën, Ford, Peugeot and Volkswagen.

Use with 10mm hand tools only, MAX torque 13Nm.
Maximum opening 14mm.

Keep thread clean and lightly lubricated.

THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!

Made in China

2 Way Pull Clamp, 51149

Claw width: 50mm
Total length: 230mm
Single way: 3t
Side way: 1t
Weight: 2.9kgs

Made in China

8l Oil drain can, 51127

Suitable for draining and storing: oil, gasoline, antifreeze, coolant, etc.
Capacity 8 l.
Material: plastic

Made in China

T15H Extra Long Screwdriver 300mm, 50779A

Magnetic tip screwdriver
With Slip-Not ergonomic soft grip handle.
For use on both Tamper Proof and standard Torx screws.
The long length is ideal for hard to reach screws.
Material: S2 steel.
Blade length: 300mm
Overal length: 400mm
Blade Tip: T15H.