Magma

10 Pcs Double Flaring Tool Set 51245

Designed for double or single flare in soft copper, brass and aluminium tubes.
Set contains:
1pc Flaring Bar
1pc Tube Cutter 1/8" ~ 1-1/8"
7pcs Flaring Adapters: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8"
1pc 45° Flaring Cone

Made in China

21 PCS Master Adaptor Set Ball Joint Service Kit, 50042

With 4 Wheel Drive Adaptors
Brake Anchor Pin Removal and Installation
This tool kit is designed for use on all cars and
Light trucks that have press-fit type ball joints
Without the need to remove the control arm from the vehicle
Contents:
C-Frame and Forcing Screw
Installation Adaptor
Removal Adaptor
Installation Cups
Removal Cups
Receiving Tubes
For servicing universal joints on most cars / vans and light trucks
Description:
Includes all the receiver tubes and removing/installing adapters needed to work on press-fit upper and lower ball joints on most GM, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles. Comes with blow molded carrying case, making it easier to keep the tools organized and easy to transport.
Features:
Solid carbon-steel construction with anti-rust coating for ultimate endurance through years of heavy use.
Designed to easily remove and replace press-fit upper and lower ball joints with receiver tubes and adapters for most full-size GM, Ford, and Dodge vehicles.
Includes all receiver tubes and removing/installing adapters for press-fit upper and lower ball joint service.
The forged C-frame press makes it easier to remove and replace universal joints when stacking with numerous cups and receivers.
The tool case with pre-sized slots for each component keeps your tools securely organized and extends their service life.

Made in China

3 Jaws Gear puller 10”, 50742E

Heat treated, forged alloy steel with rust-resistant.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 10”

Made in China

63-100 mm 3 Leg Oil Filter Wrench 51233

Working range: 63-100mm
1/2" dr. to 3/8" dr. socket adaptor.
21mm hex head.

Made in China

3 Jaws Gear puller 12”, 50742F

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 12”

Made in China

Vacuum tester and brake bleeder, 50411

The Vacuum/Pressure Pump may be used for many different tasks.
1. Testing vacuum-operated components (door locks, actuators,etc)
2. Engine mechanical testing (valves, cam timing, head gasket, etc)
3. Brake and clutch hydraulic system bleeding
4.Measurement of vacuum supplied by booster reservoirs solenoids or the engine.
Features:
Checks vacuum/pressure
Operated automotive components.
Can be used to bleed hydraulic  systems or siphon fluids.
Detailed used instructions and photos inside of case.
Hand pump with built-in vacuum pump
Assorted vacuum hoses
Assorted hose adapters
Universal cup adapter
4 ounce reservoir jar
Jar lids

Battery Post and Terminal Brush, 51302

Used to remove dirt, rust and corrosion from battery posts and terminals.
External brush for cleaning battery terminals.
Internal brush for cleaning battery posts.
Damage resistant steel bristles.
Nickel-plated metal construction.
Total length: 80mm.

Made in China

Volvo 1.6, 1.9, 2.0, 2.4 - Diesel Engine Timing Tool Set 51030

Features: for Volvo 1.6, 1.9, 2.0 and 2.4 Diesel engines.
Applicable:  Volvo C30 (2006-2013), C70 (2006-2013), S40 (2004-2012), S60 (2001-2015), S80 (2001-2015), V40 (2000-2015), V50 (2004-2012), V60 (2010-2015), V70 (2001-2015), XC60 (2008-2015), XC70 (2002-2016), XC90 (2002-2014).
Engine codes:
1.6: D4164T, D4162T
1.9: D4192T3, D4192T4
2.0: D5204T2, D5204T3, D5204T5, D5204T, D4204T, D4204T2
2.4: D5244T9, D5244T13, D5244T8, D5244T5, D5244T6, D5244T7, D5244T, D5244T2, D5244T3, D5244T4, D5244T10, D5244T11, D5244T15, D5244T14, D5244T19, D5244T17, D5244T16, D5244T18

OEM# tools: 999 7119, 999 7120, 999 7121, 999 7120, 999 7233, 999 7122, 999 7005, 999 7007.

Made in China

Mercedes Benz Ball Joint Remover Installer Set, 50453

Spesialized 10-Piece tool kit to service all of the pressed-in ball joints incorporated in the Mercedes W210 / W211 / W220 / W230 / W163/ W164 suspensions.
This tool set allows servicing (installation and removal) of the specified ball joints on the vehicle. This saves tremendous time and effort by avoiding the necessity of disassembling the brake system and other suspension components that would disturb suspension alignment.
Includes:
C-Clamp press tool forged (not cast) form SCM440 Steel (HRC 38-42 hardness)
Front Suspension Ball Joint press fixtures for W220 / W211 / W230 Chassis - used in Conjunction with the C-Clamp Press.
Front Sway Bar Ball Joint (pressed into control arm) press fixtures for W220 /
W211 - used in Conjunction with the C-Clamp Press.
Front & Rear Suspension Ball Joint press fixtures for W163 / W164 Chassis - used in Conjunction with the C-Clamp Press.
Ball joint socket (4-prong) for servicing front ball joint on W163 / W164 Chassis
Application: Mercedes Benz
W210 Chassis - 1995-2002 E Class
W211 Chassis - 2002-2009 E Class
W220 Chassis
W230 Chassis
W163 Chassis - 1998-2005 M Class
W164 Chassis - 2006-present M Class

Made in China

Windshield Removal Tool Set, 50220

This universal kit includes all of the specialised tools required to safely and quickly remove windshields from a wide variety of vehicles.
Item is supplied with a rubber gasket knife, cutting wire, two (2) handles, wire feeder tool, trim pad remover and molding release tool.

Set includes:

- Wire: Three strong galvanised steel wires braided to form one wire
- 2 pcs Wire gripping handles: Feed the wire through the hole in the wedge shaft. Loop it through the hole at the top of the shaft. Then back into the handle. Pressing the wedge back into the handle, the wire is held.
- Windshield removal tool: Cuts the vinyl adhesive compound around the windshield.
- Wire feeder tool: Designed for easy and flexible insertion of wire through polyurethane, allowing speedy removal of bonded windshield
- Trim pad remover: Place the tool under the edge of the door upholstery panel and insert it into the fastener as far as possible, then simply pry up.
1PC stainless steel wire with reel.
2PCS Wire gripping handles.
1PC Windshield removal tool
1PC Wire feeder tool
1PC Trim pad remover
1PC Windshield molding release tool

Made in China

Vacuum pressure pump brake bleeding kit, 50404A

Easily bleed brakes and test automotive vacuum systems by yourself
Works on all vehicle makes and models
Replaceable O-ring cylinder head gasket, rubber piston ring and valves
Precise pressure gauge: 0 -30inHg, 0 -760mmHg 

Made in China

Ø65mm Telescoping Inspection Mirror with LED, 51296

Inspection mirror with built-in LED light.
Impact resistant ABS frame for better mirror protection.
Swivel joint design provides improved accessibility for hard to reach areas.
Textured, ergonomic handle for superior grip and control.
Supplied with two pieces CR2032 3V batteries.
Mirror diameter: 65mm.
Adjustable Length: 275-855mm.

Made in China

60-115mm Oil Filter Chain Wrench 50966

Designed for removing and installing oil filters.
Double chain provides powerful and smooth operation.
Capacity: Ø60-115mm.
1/2" Drive

Made in China

Coil Spring Compressor For Wishbone Suspensions, 50452

Suitable to work on lower supports with a small access (< 30 mm)
Suitable for more coil springs - Working range: 95 - 220  mm
100Nm Extension torque bar controls excessive torque being applied
Holder discs with wide application
Applicable to vehicles with a swing arm diameter of 30 mm and bigger.
Applicable:
Chrysler, Citroen, Ford, Honda, KIA, Mitsubishi, Peugeot, Renault, Seat, Skoda, Suzuki, Toyota, Volvo, Volkswagen,  etc.
BMW 3 series (1996-2013)
Mercedes Benz W202/ W204 (1997-2013)
Includes:
150 mm steel pressure plate
130 mm steel pressure plate
Compressing bar
Extension bar with 100 Nm torque control for use with impact wrench.

Made in China

Air Inflator w/ gauge, 50189

Feature:
Body ALUM
Air Inlet: 1/4" Male
Operating Pressure: 90 PSI.
Air Flow 1.03 CFM at 100 PSI.
Function:
1. Fill Air. (inflation)
2. Release Air. (deflating)
3. Gauge Pressure. (measuring)
Specification:
- Body:Pistol Grip
- Gauge:Rubber Protected 2"
A. 0-220 PSI
B. 0-15 kg/cm2
C. 0-15 bar
D. 0-1500 kPa
- Rubber Hose 1/4" 32 CM & Clip