Magma

M8x1.25, 100 pcs Helicoil thread inserts, 50727C

Description:
Precisely shaped stainless steel wires with diamond-shaped cross-section.
Easy way to recover threads or create new ones.
Made of corrosion-resistant stainless steel.
Size: M8x1.25
Package of 100 pcs.

12 pcs Go Through Screwdriver set 50243
Content:
Slotted screwdriver:
6.0х38 mm;
3.2х75 mm;
5.0х75 mm;
6.0х100 mm;
8.0х150 mm;
9.5х200 mm.
Philips:
РН2х38 mm;
РН0х75 mm;
РН1х75 mm;
РН3х150 mm;
РН4х200 mm

219 Pcs 1/4", 3/8", 1/2" Drive Socket Set, 10219
Manufactured from chrome vanadium steel.
Set contains a wide range of inserts (short and deep) with different drives (1/4"Dr, 3/8"Dr, and 1/2"Dr.), extensions, 3 pcs Ratchet haldles (1/4"Dr, 3/8"Dr, and 1/2"Dr.) , bits, Combination wrenches, etc.

Made in China

Ford, Volvo - Trailing Arm Bush Tool, 50968

Designed for the removal and installation of the rear trailing arm mounting bushes on Ford vehicles.
Also suitable for some Volvo vehicles that share the same Ford platform.
The bush can be replaced without removing the trailing arm from the vehicle.
Applications:
Ford: Mondeo MK4 (2007-), S-Max ( 2006-), Galaxy (2006-)
Volvo: S60, S80, XC60, V70, XC70 (2006-)

Made in China

M9x1.25 Thread repair set , 50725N

Features:
This thread repair kit creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads.
Protects tapped threads against wear and damage.
Set includes drill bit, thread tap, insert installations (heli-coil - 10 pcs) and lug breaking tool.
Size: 9x1.25

Made in China

VAG 1.2/1.4TFSI Timing Tools, 50169

Timing chain wear measuring kit for the latest VAG 1.2 & 1.4 TFSi chain drive petrol engines.
Allows the timing chain wear to be accurately measured with the minimum amount of dismantling.
If the angle reading shown exceeds that of the manufacturer’s angular measurement then the camshaft drive chain and associated components must be replaced.
Applicable:
Audi: A1 (2012-2015), A1 Sportback (2012-2015), A3 (2013-2015), A3 Sportback (2012-2015)
Seat: Ibiza (2012-2017), Leon (2012-2015), Toledo (2012-2017)
Skoda: Fabia II (2010-2015), Fabia III (2014-2017), Octavia II (2010-2013), Octavia III (2010-2015), Praktik (2010-2015), Roomster (2010-2015), Rapid (2015-2017)
Volkswagen: Golf VII (2008-2015), Golf VII Estate (2008-2017), Jetta (2012-2018), Polo (2012-2018), Sportsvan (2014-2017)
Engine Codes:
1.2 TFSi: CJZA, CJZB, CJZC, CJZD
1.4 TFSi: CGGA, CGGB, CHPA, CMBA, CPVA, CPVB, CRJA, CXSA
1.4 TFSi ACT: CPTA

OEM: T10550

Made in China

Brake fluid tester, 50464

For quick and accurate checking of the brake fluid condition.
Identifies the percentage of water in the brake fluid.
 A basic tool for regularly checking the safety of your brakes.
Easy to use.
Color-coded LEDs indicate the water level.
Power supply: 1 x1.5V "AAA" battery
Indications:
Green: Battery OK, no water found.
Yellow: Less than 1% water. No action necessary.
Yellow/Yellow: 2% water found, check regularly.
Yellow/Yellow/Red: 3% water found, change brake fluid.
Yellow/Yellow/Red/Red: 4% water found, the brake fluid should be changed immediately.

Made in China

Ford 1.0/1.1 EcoBoost & 2.0 EcoBlue/TDCi - Torque Multiplier Set, 51357

Mercedes-Benz Ball Joint Socket 43mm, 51043

For quick, easy and professional loosening and tightening of the supporting joint flat nut.
The design of the socket wrench allows the supporting joint pin to be held in place when the nut is loosened or tightened, and it allows the use of a 1/2" screwdriver. The socket wrench specially adapted to the nut engages frictionally in the nut profile.
Slipping is impossible and the high tightening torque (up to 250 Nm) can be applied and transmitted precisely.
Technical data
Drive 1/2" or 30mm Combinationa wrench
Size: 43 mm
Mercedes-Benz Application:
W 167: GLE and GLS front and rear axle
W 205: C-Class 4Matic and AMG models (sedan, T-model, coupe and convertible) front axle
W 213: E-Class 4Matic and AMG models (sedan, model T) front axle
W 238: E-Class 4Matic and AMG models (coupé, cabriolet) front axle
W 253: GLC AMG and GLC Coupé front axle
W 257: CLS 50 AMG Coupé front axle

Made in China

3" Replacement stones for Cylinder Hone, 50722

3 pcs set, for Standard engine cylinder hone

Hone lenght: 75 mm

Made in China

M10x1.0 Thread repair set, 50725D

Features:
This thread repair kit creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads.
Protects tapped threads against wear and damage.
Set includes drill bit, thread tap, insert installations (heli-coil - 10 pcs) and lug breaking tool.
Size: 10x1.0

Made in China

• Purpose: Ensures correct torque and angle application on cylinder head bolts when paired with a suitable torque multiplier (e.g., OEM 303-1611).
• Engine Compatibility: All 2.0L EcoBlue diesel engines.
• Made in China

Trim clip removal pliers, 50948

Heat treated carbon steel body.

Comfortable handle with plastic coating.

Spring mechanism.

Easy access to confined areas.

Length: 235 mm

Made in China

Motorcycle brake caliper removal kit, 50448

A set of tools that greatly facilitates and saves time when dismantling brake calipers on motorcycles.
Removes frozen pistons with ease.
Will not mark or damage the working part of the piston.
It contains a set of 12 universal adapters with dimensions 19 - 30 mm.

Made in China