Magma

Mercedes-Benz OM654 - Engine Timing Tool Set, 51106

Applicable: A Class (from 2019), B Class (from 2019), C Class (from 2018), CLA (from 2019), CLS (from 2018), E Class (from 2016), GLB (from 2019), GLC Coupe (from 2019), GLE (from 2019), V Class (from 2019) and Vito (from 2019).

Engine codes: 1.6L 654.916 and 2.0L 654.920.

OEM No.: W654 589 00 40 00, W654 589 01 40 00 and W654 589 00 21 00.

Made in China

16 Pcs Bearing extractor set with slidding hammer, 50148

For removal of Pilot Bushes Bearings etc.
Form blind housings.
One Slide hammer assemble 2.5 jaws.
Made of ultra strong Cr-Mo material
For proffesional use.
Specification:
Thread: M10×1.5; M10×1.5 to M8×1.25, M10×1.5 to M6×1.0
Collects size: 6-13mm; 10-17mm; 15.5-22mm; 22-29mm; 28.5-35mm; 35.5-39mm; 38.5-45mm; 42.5-49mm; 48.5-55mm; 52.5-59mm
Contents:
1x Sliding Hammer Assy
1x 2 Claw Puller Assy
3x Screw Adaptors
10 X Collects
1 X Counter Stay Puller

Made in China

2" Replacement stones for Cylinder Hone, 50720

3 pcs set, for Standard engine cylinder hone

Hone lenght: 50 mm

Made in China

5 pcs Trim fastener and molding removal set, 50241

Set includes five different sizes and styles of tools that allow easy removal of trim fasteners, moldings and wheel hubs.
Tools are made of plastic to prevent damage to trim, moldings, alloy wheels or vehicle paint.
Can be used on trim fasteners and moldings inside or outside

10 pcs Motorcycle Flywheel Puller Set, 60023

A set of flywheel pullers used for separating the flywheel from the crankshaft taper.
Contents:
5 double ended pullers with sizes:
M28 x M26 (1.0 mm thread),
 M25 (1.25 mm) x M22 (1.0 mm),
M27 x M24 (LH) (1.0 mm),
M26 x M22 (1.5 mm),
M27 (1.25 mm) x M20 (1.0 mm)
2 single ended puller:
M28 x 1.5 mm,
M19 x 1.0 mm
Threaded bolts: M14 x 1.5 mm, M16 x 1.5 mm, M18 x 1.5 mm

Made in China

17 Pcs Bearing and Seal Driver Set, 50147

Features:
It is only suitable for small bearings with a light press fit. e.g. bicycle wheels, alternator, washing machine, electric motors etc.
The tool is Not An Extractor, just an installer. For bearing removal needed another tool .
This comprehensive set allows the user to insert wheel bearing race and seals easier without damaging the race and axle housing.
Fits most standard bushing/wheel bearings.
Simply turn discs over to drive seals.
Material: Aluminium
Set includes the following sizes (small end diameter x large end diameter):
10mm x 12mm; 12mm x 14mm; 14mm x 16mm; 15mm x 17mm; 16mm x 18mm; 18mm x 20mm; 20mm x 22mm; 22mm x 24mm; 25mm x 27mm; 28mm x 30mm; 30mm x 34mm; 32mm x 36mm; 35mm x 40mm; 38mm x 42mm

Made in China

Camshaft Locking tool VW, Audi, Seat, Skoda - 1.4; 1.6 FSI, 50360

Features: For 1.4 & 1.6 16V / 1.4 & 16 FSI petrol  engines (1997 on)
Suitable for VW 1.4 and 1.6 twin camshaft twin belt engines introduced in 1997
Depending on engine type, either the complete bridge and pins or the pins alone may be used
Applicable:
Audi : A2 1.4 (00-06)
Seat: Arosa 1.4 (99-05), ; Cordoba 1.4 (99-08); Ibiza 1.4 (99-08); Inca 1.4 (00-04); Leon 1.4, 1.6 (99-05), Toledo 1.4, 1.6 (99-05)
Skoda: Fabia 1.4 (99-05) ; Octavia 1.4 (99-05)
VW : Beetle 1.4, 1.6 (01-08); Bora 1.4, 1.6 (97-08); Caddy 1.4, 1.6 (99-08); Golf 1.4, 1.6 (97-08); Lupo 1.4, 1.6 (98-05); Polo 1.4, 1.6 (98-07) ...

1-1/8" Cylinder Hone Three arms ø20-64mm, 50717

With three legs
Suitable for small brake cylinders.
Stone size: 28.5 mm (1-1/8”)
Capacity: ø20-64 mm (3/4” – 2-1/2”)

Made in China

Ford 2.0 EcoBlue TDCi - Crankshaft Pulley Puller, 51118

Designed to remove the crankshaft pulley when accessing to the timing belt.
Suitable for Ford 2.0 EcoBlue TDCi diesel engines from 2016.
Applications: Ford Edge, Focus, Focus Active, Galaxy, Kuga, Mondeo, S-MAX, Transit, Transit Custom, Tourneo Custom.
Engine codes: BCCA, BCCB, BCCC, YLCA, YLCB, YLCC, YLDA, YLDC, YLF6, YLFA, YLFB, YLFS, YLR6, YMCA, YMCB, YMCC, YMF6, YMFA, YMFB, YMFS, YMR6, YNCA, YNF6, YNFA, YNFB, YNFS, YNR6, YNRA.
OEM#: 204-158-01, 205-295

Made in China

2 pcs Coil Spring Compressor for MacPherson, 50886

Features:

Compresses the coil spring to replace the shock absorber unit or spring.

Made of 40Cr steel.

Forged construction threaded rod with built-in detention pins to help lock the coil in place.

Overall size: 300 mm

Made in China

1-1/8" Cylinder Hone Twin Leg ø20-64mm, 50716

Flexible drive shaft and adjustable cutting control.
Fitted with 28.5mm(1-1/8") medium grade stones with adjustable capacity from ø20-64mm.
Suitable for small brake cylinders.

Replacement Grinding Wheel, 51275

Made of silicon carbide abrasive.
No sparks and minimum dust development.
Outer Diameter: 150mm.
Inner Diameter: 90mm.
Maximum speed: 4000 rpm.
Suitable for Aluminium Wheel Hub Grinder 150mm MG51274.

Made in China

Glow Plug Electrode Removal Tool Set M8 / M10, 51031

Features: Designed for removing broken glow plug electrodes.
Suitable for glow plug M8x1.0, M10x1.0, M10x1.25.
Contains:
2 pcs Tap: M3x0.5, M4x0.7
2 pcs Drill: 2.5x120mm, 3.3x140mm
2 pcs Thread Rod: M4x0.7x175mm
1 pcs Thread Rod: M3x0.5x175mm
3 pcs Extraction Nut
3 pcs Extraction Adaptor: M8x1.0, M10x1.0, M10x1.25
3 pcs Guide bolt: M8x1
3 pcs Guide bolt: M10x1.0
3 pcs Guide bolt: M10x1.25

Made in China

Ear-Type CV Joint Boot Clamp Pliers, 50783

For ear type clamps, fits late model GM CV joint boots, also installs PERMA-QUICK type clamps quickly and easily use for filter, cooling system and vacuum lines.
Applicable: VW, Audi, Vauxhall, BMW, Mercedes Benz, Honda, Nissan and Mazda.

Made in China

Code: 50180

1-1/8" Replacement stones for Cylinder Hone, 50718

3 pcs set, for Standard engine cylinder hone

Made in China