Magma

MINI N12, N16, N18 - Valve Pressure Spring Remover and Installer Set, 50589

Features: Designed to remove and install the pressure spring on intermediate lever.
Application:
MINI: Clubman, Clubvan, Countryman, Cooper, Coupé, Mini One, Paceman, Roadster.
Citroen: C3, C3 Picasso, C4, C4 Picasso, C5, DS3, DS4, DS5.
Peugeot: 207, 208, 3008, 308, 5008, 508, RCZ, Partner.
Engine codes:
MINI: N12, N16, N18
PSA: EP6, EP6CDT, EP6CDTM

OEM tools: 11 9 571/0197-3B1, 11 9 572/0197-3B2.

Made in China

M14x2.0 Spindle for Press and Pull Sleeve Kit, 50093-3

Pulling spindle with nuts and thrust bearings.

Size: M14x2.0 mm

Length: 450 mm

Material: carbon steel

Made in China

6 pcs 3/4" Dr. Impact deep socket, 50476

Material: Cr-Mo
Contents:
3/4" Dr. TORX Impact deep socket : E18, E20, E22, E24
3/4” Dr. 12-pt Impact deep socket: 17 mm, 19 mm

Made in China

Camshaft sprocket puller for Ford, 50320

Features:
3 Legged puller specifically designed to remove the camshaft sprocket without causing damage to the pulley
Can also be used for pulling off the impeller
Applicable for Ford / Citroen / Peugeot and Mazda:
Ford: Focus (98- present 1.8D) CMax (1015), Courier (0002), Fiesta (0811), Fusion (0211), Focus (1115), Galaxy (0715), Kuga (1015), Mondeo (0615), SMax (0615), Tourneo Connect (0206), Transit Connect (0206)
Citroen: C3 III (1015), DS3 (1015), Xsara II (0015), Xsara Picasso (9910), C4 (0411), C4 II (1115), C4 Picasso/Grand Picasso (1015), C4 Air cross (1215), C5 (0005), C5 II (0408), C5 III (1015), DS4 (1115), Xantia (9801), Synergie/Evasion (9903), C8 (0215), Nemo (0810), Berlingo I/II (9911), Berlingo III (0815), Dispatch/Jumpy (9907), Dispatch/Jumpy II (0715), Relay/Jumper (0102)
Mazda: 2 (DE/DH) (0210)
Peugeot: 107 (0510), 1007 (0510), 206 (0109), 206CC (0507), 208 (1214), 306 (9902), 307 (0106), 307CC (0509), 308 (1114), 308CC (0914), 407 (0811), 407 Coupe (0712), 508 (1114), RCZ (1014), 2008 (1314), 3008 (1014), 4008 (1214), 5008 (1014), Bipper (0810), Partner/Partner Origin/Ranch I/II (0511), Partner III (0814),
Engine codes:
1.4D TDCi/Hdi: F6JA, F6JB, F6JC, F6JD, 8HP (DV4C), 8HR (DV4C), 8HS (DV4TED), 8HZ (DV4TD), 8HX (DV4TD), DV4C (8HP), DV4C (8HR), DV4TD (8HT), DV4TD (8HX), DV4TD (8HZ), DV4TED (9HS)
1.6D TDCi ECOnetic: HHJD
1.8D Turbo/TDCi: C9DC, RTN, RTP, RTQ, BHDA, BHDB, BHPA, C9DA, C9DB, C9DC
1.8 TDCi ECOnetic: KHBA
2.0 TDCi: AZBA, AZBC, AZWA, AZWC, G6DA, G6DB, G6DC, G6DD, G6DE, G6DF, G6DG, KLBA, LPBA, TXBA, TXDA,TXDB, TXWA, TYBA, TYDA, TYWA, UFBA, UFDB, UFWA, UKBA, UKBB, UKWA, UKDB, QXBA, QXBB
2.0 TDCi ECOnetic: KLBA, LPBA, TYBA
OEM 21-229, 303-651.
Engines Ford: Fiesta 1.8d TURBOB(98-), Focus 1.8d (98-).

Made in China

7 pcs Auto body repair set, 50209

Made of high-grade high-carbon steel.
It contains 3 models of ergonomic grippers, as well as adapters, necessary to straighten the car's dents.
Contains:
1pc standard bumping hammer
1pc pick and finish hammer
1pc reverse curve hammer
1pc curved dolly
1pc utility dolly
1pc double end hand dolly
1pc shrinking dolly.
Made in China

Introducing the Left Handed Thrust Bolt 50071, a must-have tool for specific vehicle models.

• Compatible with Renault, Espace, Citroen C5, Ford Mondeo, and Mazda.
• Expertly manufactured in China, ensuring quality and precision.
• Designed for efficient and effective performance.

Vacuum Oil and Fluid Extractor, 50546

Suitable for the extraction of engine oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. Also suitable for low viscosity fluids such as water.
Do not use with petrol or other flammable liquids.
Tank base for feet to step on to stabilize the tank while pumping.
Capacity 5.5L.

Made in China

M12x2.0 Spindle for Press and Pull Sleeve Kit, 50093-2

Pulling spindle with nuts and thrust bearings.

Size: M12x2.0 mm

Length: 450 mm

Material: carbon steel

Made in China

6 Pcs Torx 1/2" Dr. Impact Socket Set, 50067

Materal: Cr-Mo steel
Length: 44 mm
Size: T55, T60, T70, T80, T90, T100

Made in China

Seal Puller 50107

Used to remove oil and grease seals
Two different size tips enables this tool to accommodate most applications.

Made in China

M10x1.5 Spindle for Press and Pull Sleeve Kit, 50093-1

Pulling spindle with nuts and thrust bearings.

Size: M10x1.5 mm

Length: 450 mm

Material: carbon steel

Made in China

Standard engine cylinder hone 51 - 177 mm, 50723

•    Fast Accurate deglazing of cylinders of 2" to 7" in diameter
•    3, 4" long stone bars, 220 Grit Aluminum Oxide, replaceable
•    Adjustable collar to prevent stone breakage and control diameter
•    Use with 3/8" or 1/2" everyday portable drill or drill press
•    Flexible shaft to tool centering, adjustable tension on stone blades

Seal Puller, 50108

Double Hook with joint for removal of shaft gaskets.
Quick and easy disassembly with 320 mm lever.
Lever adjustable in five positions of up to 45°

Made in China

M18x2.5 Spindle for Press and Pull Sleeve Kit, 50092-5

Pulling spindle with nuts and thrust bearings.

Size: M18x2.5 mm

Length: 350 mm

Material: carbon steel

Made in China

GM 1.0 / 1.2 12V - Engine Timing Tool Set 51287

Features:  For GM 1.0 12V (3-cylinder), 1.0 12V (3-cylinder) turbo and 1.2 12V (3-cylinder) turbo Ecotec / CSS Prime petrol engines.
Applications:
Chevrolet: Onix 1.0 / 1.0 turbo (2019-), Onix Plus (sedan) 1.0 / 1.0 turbo (2019-), Montana 1.2 turbo (2022-), Tracker 1.0 turbo / 1.2 turbo (2020-)
Buick: Encore GX (2020)

OEM# tools: EN-52457, EN-52458, EN-52476

Made in China