Magma

9 pcs Panel beating set, 50926

Made of high-grade high-carbon steel.
It contains 4 models of ergonomic grippers, as well as adapters, necessary to straighten the car's dents.
N.W. : 9.7 kgs

Made in: China

Brake Piston Wind Back Tool, 50066

Specifications:
Chemically blackened steel spreader plates
Suitable for most ATE, Bendix, Delco, Brembe and Girling calipers
Fitted with tommy bar
Chrome screw with linking bar
Capacity: 0 ~ 2.5" (0 ~ 65mm)
Applications:  Alfa, Audi, Fiat, Ford, Nissan, GM (Vauxhall/Opel), Peugeot, Renault, Rover, VW, Porsche. The list is endless...

Timing Belt Checking Gauge, meticulously designed for PureTech 1.0 and 1.2 liter engines (PSA group). This gauge is essential for maintaining engines where the belt is immersed in oil, which can lead to wear and potential damage over time.

With this tool, you can quickly and easily measure the width and wear of the belt. Early detection of thinning below the acceptable minimum allows for timely replacement and prevents serious engine damage.

Key Features:

• Specifically designed for PSA PureTech 1.0 and 1.2 liter engines (EB-series).
• Enables quick and easy measurement of timing belt wear.
• Helps prevent serious engine damage by detecting wear early.
• Compatible with models from Peugeot, Citroën, Opel, and DS Automobiles manufactured after 2012.
• OEM#: G-0109-6 / EN-52809
• Origin: China

Application: Compatible with petrol 1.0 and 1.2 liter PureTech engines (EB-series) of the PSA group, produced after 2012, including models of Peugeot, Citroën, Opel and DS Automobiles.

Mercedes Benz Ball Joint Remover Installer Set, 50453

Spesialized 10-Piece tool kit to service all of the pressed-in ball joints incorporated in the Mercedes W210 / W211 / W220 / W230 / W163/ W164 suspensions.
This tool set allows servicing (installation and removal) of the specified ball joints on the vehicle. This saves tremendous time and effort by avoiding the necessity of disassembling the brake system and other suspension components that would disturb suspension alignment.
Includes:
C-Clamp press tool forged (not cast) form SCM440 Steel (HRC 38-42 hardness)
Front Suspension Ball Joint press fixtures for W220 / W211 / W230 Chassis - used in Conjunction with the C-Clamp Press.
Front Sway Bar Ball Joint (pressed into control arm) press fixtures for W220 /
W211 - used in Conjunction with the C-Clamp Press.
Front & Rear Suspension Ball Joint press fixtures for W163 / W164 Chassis - used in Conjunction with the C-Clamp Press.
Ball joint socket (4-prong) for servicing front ball joint on W163 / W164 Chassis
Application: Mercedes Benz
W210 Chassis - 1995-2002 E Class
W211 Chassis - 2002-2009 E Class
W220 Chassis
W230 Chassis
W163 Chassis - 1998-2005 M Class
W164 Chassis - 2006-present M Class

Made in China

7 pcs Auto body repair set, 50209

Made of high-grade high-carbon steel.
It contains 3 models of ergonomic grippers, as well as adapters, necessary to straighten the car's dents.
Contains:
1pc standard bumping hammer
1pc pick and finish hammer
1pc reverse curve hammer
1pc curved dolly
1pc utility dolly
1pc double end hand dolly
1pc shrinking dolly.
Made in China

Introducing the Left Handed Thrust Bolt 50071, a must-have tool for specific vehicle models.

• Compatible with Renault, Espace, Citroen C5, Ford Mondeo, and Mazda.
• Expertly manufactured in China, ensuring quality and precision.
• Designed for efficient and effective performance.

The 3/8"Dr. 22mm Oxygen Sensor Socket 50323C is an essential tool for removing and installing oxygen sensors.

• Drive: 3/8" for compatibility with standard ratchets and extensions.
• Size: 22mm, 6-point (hex) design ensures a secure grip on the sensor.
• Durable Construction: Made from high-quality Chrome Vanadium steel for strength and longevity.
• Slotted Design: Features a 20mm wide slot to accommodate sensor wiring during removal and installation, preventing damage.

Made in China

Coil Spring Compressor For Wishbone Suspensions, 50452

Suitable to work on lower supports with a small access (< 30 mm)
Suitable for more coil springs - Working range: 95 - 220  mm
100Nm Extension torque bar controls excessive torque being applied
Holder discs with wide application
Applicable to vehicles with a swing arm diameter of 30 mm and bigger.
Applicable:
Chrysler, Citroen, Ford, Honda, KIA, Mitsubishi, Peugeot, Renault, Seat, Skoda, Suzuki, Toyota, Volvo, Volkswagen,  etc.
BMW 3 series (1996-2013)
Mercedes Benz W202/ W204 (1997-2013)
Includes:
150 mm steel pressure plate
130 mm steel pressure plate
Compressing bar
Extension bar with 100 Nm torque control for use with impact wrench.

Made in China

18mm Damage Bolt & Locking Wheel Nut Remover Twist Socket, 1/2" Dr. 50927-18

Professional 18mm twist socket extractor with a 1/2" drive, engineered specifically for removing rounded, rusted, or stripped nuts and bolts. It is highly effective for extracting stubborn locking wheel nuts. Manufactured from premium Chrome-Molybdenum (Cr-Mo) steel for ultimate strength.

THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!

Made in China

5 Pcs Ball Joint Separator, 50435

Content:
Ball Joint Separator
Tie Rod And Ball Joint Remover
Conical Pitman Arm Puller
Pitman Arm And Tie Rod End Puller
Pitman Arm Puller

Description:
Ball Joint Separator - For separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles adjustable for different size ball joints
1-1/8" & 2-1/8" (30 & 56mm) maximum opening capacity
7/8" jaw spread, 2-1/4" throat depth
Tie Rod And Ball Joint Remover - A universal heavy-duty puller that removes a wide range of tie rods and ball joints from a variety of cars, trucks, SUVs and heavy-duty vehicles.
0 to 2-1/2" jaw spread, 3-1/4" throat depth
Conical Pitman Arm Puller - Designed to fit securely on Pitman arms for compact and mid-size cars.
3/4-16 x 4-3/4" forcing screw provides enough power to remove stubborn pitman arms.
Pitman Arm And Tie Rod End Puller - This versatile tool can be used as a pitman arm remover for many small, domestic rear-wheel drive vehicles, or as a tie rod end puller for many domestic and import vehicles. The jaws, with a spread of 1", give a secure positive grip in tight workspaces.
1-1/8" jaw spread, 2-1/8" throat depth
Pitman Arm Puller - This puller will handle nearly any pitman arm job on passenger cars and light trucks. It features special forged jaws, shaped to fit most models, keeping a solid grip while you work.
1-11/32" jaw spread, 2-1/2" throat depth

Made in China

6 pcs 3/4" Dr. Impact deep socket, 50476

Material: Cr-Mo
Contents:
3/4" Dr. TORX Impact deep socket : E18, E20, E22, E24
3/4” Dr. 12-pt Impact deep socket: 17 mm, 19 mm

Made in China

Camshaft Locking tool VW, Audi, Seat, Skoda - 1.4; 1.6 FSI, 50360

Features: For 1.4 & 1.6 16V / 1.4 & 16 FSI petrol  engines (1997 on)
Suitable for VW 1.4 and 1.6 twin camshaft twin belt engines introduced in 1997
Depending on engine type, either the complete bridge and pins or the pins alone may be used
Applicable:
Audi : A2 1.4 (00-06)
Seat: Arosa 1.4 (99-05), ; Cordoba 1.4 (99-08); Ibiza 1.4 (99-08); Inca 1.4 (00-04); Leon 1.4, 1.6 (99-05), Toledo 1.4, 1.6 (99-05)
Skoda: Fabia 1.4 (99-05) ; Octavia 1.4 (99-05)
VW : Beetle 1.4, 1.6 (01-08); Bora 1.4, 1.6 (97-08); Caddy 1.4, 1.6 (99-08); Golf 1.4, 1.6 (97-08); Lupo 1.4, 1.6 (98-05); Polo 1.4, 1.6 (98-07) ...

Standard engine cylinder hone 51 - 177 mm, 50723

•    Fast Accurate deglazing of cylinders of 2" to 7" in diameter
•    3, 4" long stone bars, 220 Grit Aluminum Oxide, replaceable
•    Adjustable collar to prevent stone breakage and control diameter
•    Use with 3/8" or 1/2" everyday portable drill or drill press
•    Flexible shaft to tool centering, adjustable tension on stone blades

M16x2.5 Spindle for Press and Pull Sleeve Kit, 50093-4

Pulling spindle with nuts and thrust bearings.

Size: M16x2.5 mm

Length: 450 mm

Material: carbon steel

Made in China

6 Pcs Torx 1/2" Dr. Impact Socket Set, 50067

Materal: Cr-Mo steel
Length: 44 mm
Size: T55, T60, T70, T80, T90, T100

Made in China