Magma

1-1/8" Cylinder Hone Three arms ø20-64mm, 50717

With three legs
Suitable for small brake cylinders.
Stone size: 28.5 mm (1-1/8”)
Capacity: ø20-64 mm (3/4” – 2-1/2”)

Made in China

Professional-grade straight long-reach pliers designed for removing and installing spring-type hose clamps in hard-to-access areas. Features a 340mm length for maximum reach in tight engine bays.

60-115mm Oil Filter Chain Wrench 50966

Designed for removing and installing oil filters.
Double chain provides powerful and smooth operation.
Capacity: Ø60-115mm.
1/2" Drive

Made in China

1-1/8" Cylinder Hone Twin Leg ø20-64mm, 50716

Flexible drive shaft and adjustable cutting control.
Fitted with 28.5mm(1-1/8") medium grade stones with adjustable capacity from ø20-64mm.
Suitable for small brake cylinders.

28 pcs Press and sleeve master kit, 50605

Ideally for silent bearings, hydro bearings, bushings, ball bearings, simmerrings, ect.

Universal use for automobile, truck, municipally, country and forestery technology, ect.

Contents:
4 x step discs
4 x pulling spindle and nuts
8 x thrust bolts M10, M12, M14, M16,
20 x pressure sleeves:
Ø 44x34 mm; Ø 46x36 mm; Ø 48x38 mm;
Ø 50x40 mm; Ø 52x42 mm; Ø 54x44 mm; Ø 56x46 mm; Ø 58x48 mm
Ø 60x50 mm; Ø 62x52 mm; Ø 64x54 mm; Ø 66x56 mm; Ø 68x58 mm
Ø 70x60 mm; Ø 72x62 mm; Ø 74x64 mm; Ø 76x66 mm; Ø 78x68 mm;
Ø 80x70 mm; Ø 82x72 mm

Made in China

Magnetic tool holder, 50240
Removable magnetic multifunctional holder, which is mainly used for nuts or torque wrenches and impact sockets (17, 19, 21 mm).
Capacity: 9 kgs ( 20 Lbs )

Professional 24mm deep socket with a narrow lateral slot, designed for the safe removal and installation of oxygen sensors. The narrow slot design provides maximum socket strength while protecting the sensor wiring.

TDC Position Adapter M12× 1.25, 50527

For spark plug with M12x1,25 bore thread, for Ø8 mm diameter indicators.
Features:
Indicator socket diameter: Ø8 mm (d8).
Length of adapter stem: 25 mm
Spark plug hole thread: M12x1.25
Total length of adapter: 275 mm
Original tool numbers Alfa, Fiat, Lancia: 1860901000; 1871008400.

Made in China

16 Pcs Bearing extractor set with slidding hammer, 50148

For removal of Pilot Bushes Bearings etc.
Form blind housings.
One Slide hammer assemble 2.5 jaws.
Made of ultra strong Cr-Mo material
For proffesional use.
Specification:
Thread: M10×1.5; M10×1.5 to M8×1.25, M10×1.5 to M6×1.0
Collects size: 6-13mm; 10-17mm; 15.5-22mm; 22-29mm; 28.5-35mm; 35.5-39mm; 38.5-45mm; 42.5-49mm; 48.5-55mm; 52.5-59mm
Contents:
1x Sliding Hammer Assy
1x 2 Claw Puller Assy
3x Screw Adaptors
10 X Collects
1 X Counter Stay Puller

Made in China

1-1/8" Replacement stones for Cylinder Hone, 50718

3 pcs set, for Standard engine cylinder hone

Made in China

Professional 24mm deep socket with a 1/2" drive, specifically designed for the removal and installation of oxygen (lambda) sensors. The wide lateral slot allows the socket to fit over the sensor's wiring without causing damage.

17 Pcs Bearing and Seal Driver Set, 50147

Features:
It is only suitable for small bearings with a light press fit. e.g. bicycle wheels, alternator, washing machine, electric motors etc.
The tool is Not An Extractor, just an installer. For bearing removal needed another tool .
This comprehensive set allows the user to insert wheel bearing race and seals easier without damaging the race and axle housing.
Fits most standard bushing/wheel bearings.
Simply turn discs over to drive seals.
Material: Aluminium
Set includes the following sizes (small end diameter x large end diameter):
10mm x 12mm; 12mm x 14mm; 14mm x 16mm; 15mm x 17mm; 16mm x 18mm; 18mm x 20mm; 20mm x 22mm; 22mm x 24mm; 25mm x 27mm; 28mm x 30mm; 30mm x 34mm; 32mm x 36mm; 35mm x 40mm; 38mm x 42mm

Made in China

8 pcs Timing Locking Tool Set, 50088

For Locking and Setting Timing when replacing timing belts

Suitable for: Opel, VW, Audi, Skoda, Seat, Ford, Citroen, FIAT, Peugeot, Isuzu, Saab und Rover

Contents:
Flywheel locking tool Citroen: 2.0 petrol engines, Peugeot: 1.6, 2.0 petrol engines, 2.0, 2.1 TD engines
Crankshaft locking tool Audi: 1.2. 1.4, 1.9, 2.0 TDI PD, Seat: 1.4, 1.9, 2.0 TDI PD, Skoda: 1.4, 1.9, 2.0 TDI PD, VW: 1.4, 1.9, 2.0 TDI PD, 2.0 SDI
Camshaft locking tool Rover: 1.4, 1.6, 1.8 V16 engines
Twin camshaft locking tool Opel: 1.6 CNG, 1.6 V16, 1.8i, 1.4, 1.6, 1.8 petrol engines
Twin camshaft locking tool Opel: 2.0 OPC/VXR, 2.0 Turbo, 1.8 V16, 2.0, 2.2 petrol engines
Flywheel locking tool Opel: 1.2, 1.4, 1.6 petrol engines, 1.7 TD, 1.6, 1.7 D engines
Camshaft locking tool Opel: 2.5, 2.6, 3.0, 3.2 V6, 2.5, 2.6 V6i, Saab: 2.5, 3.0 V6 engines
Camshaft locking tool Opel: 2.5, 2.6, 3.0, 3.2 V6, 2.5, 2.6 V6i, Saab: 2.5, 3.0 V6 engines

Models:
Citroen: Jumper
Peugeot: 406, 605, 806
Audi: A2, A3, A4, A4 Quattro, A6, A6 Quattro
Seat: Alhambra, Arosa, Cordoba, Ibiza, Leon, Toledo
Skoda: Octavia, Roomster, Superb
VW: Beetle, Bora, Caddy, Caddy Maxi, Golf, Jetta, Passat, Polo, Sharan, Tiguan, Touran, Transporter
Rover: 111, 114, 211, 214, 214/216 Cabrio, 216 V16 Coupe, 218, 414, 416, 25, 45, 75, Metro, VVC, MGF, TF
Opel: Astra -F, -G, -H, Combo, Corsa -A, Calibra, Meriva, Signum, Tigra, Vectra -B, -C, Zafira -A, -B, Frontera -A, -B, Omega -B, Speedster, Kadett, Cavallier, Ascona -C, Sintra
Saab: 900, 9000, 9-5

Engine code:
Citroen: RTZ
Peugeot: XU10J2CTE, XUD11BTE, XU5JP, XUD11BTE, XU10J2TE/Z, XUD11BTE, XU10J2C/Z
VAG: ANY, ATL, BHC, AMF, BKC, ASZ, ATD, AXR, AVB, AVF, AWX, ATJ, AJM, BNA, BRF, BVF, BVG, BLB, BRE, BVA, BRD, AUY, BTB, BVK, ANU, BJB, BKC, AZV, BKD, BMN, BMS, BNV, BMT, BPX, BUK, BLT, BXE, ARL, BMM, BSW, BZS, BLS, AWB, BSU, BDJ, BST, AYZ, BRU, BGW, BHW, BMA, BUZ, BVE, BWV, BMP, BMR, BKP, BAY, BWB, AXR, BVK, BXF, AVQ, AXC, BRR, AXB
Opel: Z18XE, X18XE1, X18XE, Z18XEL, Z16YNG, X14XE, Z14XE, X16XEL, Z16XE, Y16XE, X16SEJ, X18E1, X20XEV, Z20LEH, Z20LER, Z20LEL, X22XE, X22SE, Y22SE, Y22XE, Z22XE, C20SEL, X20EV, Z20LET, 16DA, 17DA, E14LV, C14NZ, 14NV, C16NZ, E16NZ, C16LZ, 16SV, C16NZ2, X16SZ, 17DR, 12NV, C12NV, C14SE, C14SEL, C16SEL, E14LV, C16SE, X17DTL, X25XE, X30XE, Y26SE, Y32SE

Made in China

Description: Precision 41mm 8-point low-profile socket for servicing motorcycle front fork caps. Ideal for Big Piston Forks (BPF) by Showa. Made from durable materials to ensure a perfect fit without rounding the edges of the aluminum caps.

Purpose: Essential tool for servicing modern sportbike forks. Designed specifically for the high-torque requirements of Big Piston Fork (BPF) caps while maintaining a soft touch on the finished aluminum surfaces.

Ford - Torque Multiplier Set, 51201

Features: To remove and install the crankshaft pulley bolt, in order to replace the timing belt.
Suitable for Ford 1.0 Ecoboost, 1.0 / 1.1 Duratec, 2.0 EcoBlue and 2.0 Duratorq-TDCi engine.

Max. torque input: 300Nm.
Max. torque output: 1500Nm.
Gear ratio: 1:5.
Input drive: 1/2".
Output drive: 3/4".

Applicable:
Ford B-MAX, C-MAX, EcoSport, Fiesta, Focus, Mondeo, Grand Tourneo Connect, Tourneo Connect, Transit Connect, Transit Courier

OEM# tools: 303-1611, 303-1611-01, 303-1611-02.

Made in China