Magma

4 Pcs Truck Diesel Injector Socket Set, 50650

Contains:
1 pc  Hex 32mm x 70mm x 4 teeth (with M14 x 1.5 receiver thread) for Mercedes-Benz, Neoplan and Setra.
1 pc 1/2"Dr. x 72mm x 4 teeth for Mercedes-Benz.
1 pc Hex 32mm x 120mm x 4 tooth for MAN and Mercedes-Benz.
1 pc 1/2"Dr. x 120mm x 3 teeth for MAN and Mercedes-Benz.
Also suitable for some Iveco, Scania and Renault commercial vehicles.

Made in China

Piston Ring Compressor 60-175 mm, 50091

With Safety valve Special spring steel
Ratchet type complete with hex spanner
Capacity: 60-175mm
Height: 150mm (6")

Made in China

VAG 3.0 / 2.9 TFSI (EA839) - Engine Timing Tool Set, 51039

Features:
Designed to fix the camshafts in position when removing and installing the camshaft timing chains.
Suitable for VAG 6-cylinder 3.0, 2.9 4-valve TFSI (EA839) petrol engines.
Applications:
Audi: A6 (2019-); A7 (2018-); A8 (2019-); Q7 (2019-); Q8 (2019-); S4 (2016-); S5 (2016-); SQ5 (2017-); RS4 (2017-); RS5 (2017-)
VW: Touareg III (2018-)
Engine codes: CWGD; DECA; CZSA; CZSE; DLZA; DCBD; DCBE
OEM No. T40331

Made in China

Fuel Injection test kit, 50195

Description:

Renault, Nissan 1.6 Dci - Engine Timing Tool Kit, 51024

Features:
Used to hold the camshaft and crankshaft while setting engine timing.
Suitable for Renault, Nissan 1.6 dCi R9M diesel engines from 2011 onwards.
Also suitable for Mercedes-Benz, Opel / Vauxhall 1.6 R9M diesel engines from 2014 onwards.
Applications:
Renault: Espace V (2015-), Fluence (2013-), Kadjar (2015-), Koleos II (2017-), Megane III (2012-2014), Megane IV (2016-), Scenic / Grand Scenic III (2011-2016), Scenic/Grand Scenic IV (2016-), Talisman (2015-), Trafic III (2014-)
Nissan: NV300 (2016-), Qashqai / Qashqai+2 (2011-2014), Qashqai (2014-2021), X-Trail (2014-)
Mercedes-Benz: C-Class (2014-2018), Vito (2014-)
Opel / Vauxhall: Vivaro-B (2014-2019)
Engine codes: R9M 402, R9M 404, R9M 408, R9M 409, R9M 410, R9M 413, R9M 414, R9M 415, R9M 450, R9M 452, R9M 453, 622.951 (R9M), 626.951 (R9M).
OEM#: MOT 1969 / EN-51248 / 626 589 04 40 00, MOT 1970 / EN-51241 / 626 589 00 15 00

Made in China

Replacement Grinding Wheel, 51275

Made of silicon carbide abrasive.
No sparks and minimum dust development.
Outer Diameter: 150mm.
Inner Diameter: 90mm.
Maximum speed: 4000 rpm.
Suitable for Aluminium Wheel Hub Grinder 150mm MG51274.

Made in China

VAG 1.8 / 2.0 TFSI (EA888) - Timing Chain Tensioner Lever, 51007

Allows the timing chain tensioner to be retracted and locked without removing the lower timing cover
Required when replacing the timing chain
Suitable for the following engines / models (TFSI from 2007):
Audi A3, A3 Cabrio, TT, Q3
Seat Alhambra, Altea Freetrack, Exeo, Leon FR, Toledo
Octavia II, IIII Superb (3T), Yeti
Volkswagen Eos, Golf VII, Passat (B6), Passat CC, Passat, Sharan, Beetle, Scirocco, Tiguan
Applicable:
For 1.8 R4 16v TSI / TFSI (EA888):
Audi TT Mk2 (8J), 8P Audi A3, B7 Audi A4, Audi A4 (B8), Audi A5
SEAT Leon Mk2 (1P), SEAT Altea XL
Yeti, Octavia Mk2 (1Z, Ming Rui), Skoda Superb Mk2 (3T)
VW Jetta Mk5 / Sagitar, VW Passat B6, VW Passat CC
For R4 2.0 16v TSI / TFSI (EA888):
VW Golf GTI Mk5; VW Golf GTI Mk6; VW Jetta Mk5, VW Jetta Mk6, VW Passat B6, Volkswagen CC, VW Scirocco, VW Golf GTI Mk6, VW Scirocco, VW Passat B6, Volkswagen CC
Audi A3 (8P), Audi A3 Cabriolet, Audi TT, Audi A4 (B8), Q5, Audi A5, Q5, Audi TT Mk2 (8J), Q3 Audi
Skoda Superb Mk2 (3T), Octavia
SEAT Altea Freetrack SEAT Leon FR, SEAT Exeo
Engine codes (1.8L engines): SADC, ACHD, CDHB, CJEB, CCRDC, CGYA
Engine codes (2.0L engines): CCZA, CDNB, CDNC, CFKA, CCZC, CPSA, CESA, CETA, CCZB, CDND, CCZD

OEM tool: T40243

Length: 480mm

Made in China

13pcs Diesel and Petrol engine timing tool set, 50381

For setting and locking to regain top dead centre and use setting tools to re-check correct alignment.
After use, remove all setting pins & locking plates. Turn the engine over twice by hand to complete a full cycle. Regain T.D.C. (top dead center) & insert setting tools to re-check the alignment is correct. Remove setting tools and check there is no obstruction by turning the engine over twice by hand again to complete a full cycle.
Applicable to: Audi, Citroen, Peugeot, Volkswagen and Volvo diesel and petrol engined cars and light commercial vehicles.
Made in China

23 pcs Wheel Bearing removal tool kit, 50075

This set reduces the chance of damage to hub and bearing
Also suitable for removing and installing large industrial bearings

Wheel Bearing Removal Tool Set 

For Wheel Bearings on Front Wheel Drive Vehicles 

For use with Impact Tools 

Reduces Chances of  Damage to Hub and Bearings


Drive shaft: 32& 38 mm
Drift sizas: 50, 55, 60, 64, 67, 70, 72, 74, 75, 78, 82, 84, 88 mm
Made in China

Mercedes-Benz Camshaft Adjuster Control Valve Socket T100H, 50837

Designed for removal and installation of the camshaft adjuster control valve.
Suitable for Mercedes-Benz M133, M157, M176, M177, M178, M256, M264, M270, M271.8, M271.9, MG272, MG273, M274, M276 and M278 petrol engines.
Size: 1/2" Dr. x T100H
L: 78mm
Material: Cr-Mo
Made in China

Ball Joint Remover / Installer for BMW 3 Series, 50040

The kit is suitable for disassembling and mounting the BMW 3 series supporting joints.
Allows the joint to be dismantled without removing the hanger arms.
The tools are made of high quality steel.
Thanks to the replaceable piston elements, the tool can be used more widely for other car models as well as for hydraulic and plastic bushings and bearings.

The set is in blue case.

8 Pcs Damaged Hex Screw Extractor Set, 51224

Used for removing damaged, rounded or corroded Hex socket head screws and bolts.
Material:
Sockets: Chrome vanadium steel
Bits: S2 steel.
Set containis:
4x 1/4" Drive Bit Socket: 3, 4, 5, 6mm, Length 37mm
4x 3/8" Drive Bit Socket: 7, 8, 9, 10mm, Length 48mm

Made in China

Angled Relay pliers, 50815A

For use in more automobiles
This unique tool has been developed to id in the removal and installation for most types of relays.
Most relays are often located in confined areas making them difficult to reach. In many cases these relays are also grouped close together and difficult for hand removal. The pliers have specially coated tips for a solid grip required in removing and installing relays.
Ideal for tight plugged relays.
Self-opening, spring loaded with plastic handle.
Fits on most relays.
Applications: Chrysler, Ford, Mazda, Mercedes-Benz, Nissan, Vauxhall/Opel, Volkswagen.
Made in China

Labor Saving wrench, 50216

Labor Saving wrench adopt the highly effective and variable speed as a main drive, which function is small volume, light weight, Due to the big variable ratio, the less input power will come into being more output wrest distance, The product select high-grade alloy steel and the superior craft of heart treatment, firm and durable, high effective and saving, the appearance of using spray polishing, and have a good feeling. This products are used in kind of heavy-duty truck tire widely, and it is the necessary tool of auto repairman and the handy tool driver friends.

The biggest security output torque - 3800N.M.
Total length: 310 mm
Torque: 3800 Nm
Gear rate: 1:58
Impact socket: 32 mm; 33 mm

Made in China

Valve stem seal pliers, 50106

Use the reach into confimed area for removal of valve seal.
Serrated tip for better grasp of valve seal regardless of its configuration.