Magma

24 PCS Engine Oil Filler Set, 51042

2 litre funnel with 6 adaptors to fit a wide range of vehicles.
Allows for fast oil filling without spillage or waste.
Great for many late model vehicles with internal baffles.
For pouring oil where access is difficult.
Angled extension and adapters are made of plastic.
Contents:
1x Bayonet Adapter for Audi, BMW, Mercedes-Benz, Porsche, Volvo, Volkswagen
1x Bayonet Adapter for Toyota, Lexus 3.0 / 3.3 V6
1x Threaded Adapter M37x3.0 for Lexus, Toyota, Scion, Pontiac Vibe
1x Threaded Adapter M35x4.0 for Ford, Jaguar, Land Rover, Mazda
1x Threaded Adapter M32x3.5 for Acura, Dodge, Ford, Honda,  Jaguar, Jeep, Land Rover, Mazda, Nissan
1x Threaded Adapter M42x4.5 for Subaru
1x Threaded Adapter M30x3.0 for Dodge, Mitsubishi, Jeep
1x Bayonet Adapter for Ford, Mazda, Land Rover
1x Bayonet Adapter for Ford, Hyundai, Jaguar, Volvo, Mazda, Volvo
1x Bayonet Adapter for Volkswagen, Audi, Seat, Skoda
1x Bayonet Adapter for Dodge 5.7 / 6.1 / 6.4 Hemi, 3.6
1x Threaded Adapter M37x3.0 for Lexus, Toyota, Scion, Pontiac Vibe
1x Bayonet Adapter for Citroën C4 2.0, Peugeot 408
1x Bayonet Adapter for Mitsubishi Pajero V73, Volvo S80
1x Bayonet Adapter for Citroën C2 1.6L, C3 XR, C4 1.6, Peugeot 307, 206
1x Bayonet Adapter for Buick New Regal and Cadillac CTS 2.7
1x Bayonet Adapter for Buick Excelle
1x Bayonet Adapter for Volvo XC90, S80
1x Bayonet Adapter for Buick Sail 1.4, 1.6, 2.0
1x Universal Adapter
1x Oil Funnel 2L
1x Elbow
1x Angled Plastic Extension
1x Drain Fitting with Pressure Reducer

Made in China

Professional 24mm deep socket with a 1/2" drive, specifically designed for the removal and installation of oxygen (lambda) sensors. The wide lateral slot allows the socket to fit over the sensor's wiring without causing damage.

20 PCS Oil Sump Drain Plug Key Set, 20019B

Suitable for sump plugs on engine, gearbox and back axle.
Contents:
Square Male Keys: 7, 8, 10, 11, 12,13, 14mm and 5/16"
Hex Keys: 8, 9, 10, 12, 14, 17mm
Square Female: 10mm
Triangular Key: 10mm PSA
Security Spline Key: M16
VAG Plastic Plug Bit
VAG Torx T45
Flexible Head Bar 200mm

Made in China

Fuel Injection test kit, 50195

Description:

Description: Precision 41mm 8-point low-profile socket for servicing motorcycle front fork caps. Ideal for Big Piston Forks (BPF) by Showa. Made from durable materials to ensure a perfect fit without rounding the edges of the aluminum caps.

Purpose: Essential tool for servicing modern sportbike forks. Designed specifically for the high-torque requirements of Big Piston Fork (BPF) caps while maintaining a soft touch on the finished aluminum surfaces.

1/2” Dr. E20 Cylinder Head Wrench-Man, 50811

Features: For loosening and fastening cylinder head screws. Removing the injector no longer necessarily.
Ideally suited for commercial vehicles.
Profil: E-Torx.
Drive: Square, 1/2".
Applicable: MAN series F2000 / F90 / F8, MAN buses with D25 and D28 engines.

Made in China

38mm 8-point Fork Cap Socket for Showa SDBV,51381

Description: Specialized 38mm 8-point (octagon) socket designed for the safe removal and installation of front fork caps. Specifically engineered for Showa SDBV forks found on motorcycles like the Honda NC750. Prevents damage to delicate aluminum caps.

Purpose: Used for removing and installing the top fork caps on motorcycle suspension. The 8-point design ensures a precise fit on low-profile aluminum caps, preventing costly damage and scratches during maintenance.

Made in China

24mm Oil Filter Wrench For DSG Gear Oil Change, 50845
 
Features: For operation of the oil filter housing cover when changing the oil filter insert on the DSG gearbox.
Applicable: VW and VAG group vehicles.
No removal of batteries or battery holders.
VW specification: DSG oil change within the inspection interval.
Drive: Square, 1/2".
Output: Outside 12-point profile.
Wrench size: 24mm.
Length: 199 mm.

Made in China

Mercedes-Benz OM654 - Engine Timing Tool Set, 51106

Applicable: A Class (from 2019), B Class (from 2019), C Class (from 2018), CLA (from 2019), CLS (from 2018), E Class (from 2016), GLB (from 2019), GLC Coupe (from 2019), GLE (from 2019), V Class (from 2019) and Vito (from 2019).

Engine codes: 1.6L 654.916 and 2.0L 654.920.

OEM No.: W654 589 00 40 00, W654 589 01 40 00 and W654 589 00 21 00.

Made in China

10 pcs Motorcycle Flywheel Puller Set, 60023

A set of flywheel pullers used for separating the flywheel from the crankshaft taper.
Contents:
5 double ended pullers with sizes:
M28 x M26 (1.0 mm thread),
 M25 (1.25 mm) x M22 (1.0 mm),
M27 x M24 (LH) (1.0 mm),
M26 x M22 (1.5 mm),
M27 (1.25 mm) x M20 (1.0 mm)
2 single ended puller:
M28 x 1.5 mm,
M19 x 1.0 mm
Threaded bolts: M14 x 1.5 mm, M16 x 1.5 mm, M18 x 1.5 mm

Made in China

Ford 2.0 EcoBlue TDCi - Crankshaft Pulley Puller, 51118

Designed to remove the crankshaft pulley when accessing to the timing belt.
Suitable for Ford 2.0 EcoBlue TDCi diesel engines from 2016.
Applications: Ford Edge, Focus, Focus Active, Galaxy, Kuga, Mondeo, S-MAX, Transit, Transit Custom, Tourneo Custom.
Engine codes: BCCA, BCCB, BCCC, YLCA, YLCB, YLCC, YLDA, YLDC, YLF6, YLFA, YLFB, YLFS, YLR6, YMCA, YMCB, YMCC, YMF6, YMFA, YMFB, YMFS, YMR6, YNCA, YNF6, YNFA, YNFB, YNFS, YNR6, YNRA.
OEM#: 204-158-01, 205-295

Made in China

Magnetic welding holder, 50202
The design of the magnet is "ARROW". This allows you to work at different angles while welding. It can be used for angles of 45 °, 90 ° and 135 °.
Size:
3" – Capacity 11 kgs. (25 lb.)
4" – Capacity 22 kgs. (50 lb)
5" – Capacity 34 kgs. (75 lb)

Valve stem seal pliers, 50106

Use the reach into confimed area for removal of valve seal.
Serrated tip for better grasp of valve seal regardless of its configuration.

• Application: Designed for crimping cables and wires with sizes from 6 mm² to 70 mm² (square millimeters).
• Pressure/Force: The tool typically applies a force of 5 to 8 tons (70 kN).
• Made in China

Glow Plug Electrode Removal Tool Set M8 / M10, 51031

Features: Designed for removing broken glow plug electrodes.
Suitable for glow plug M8x1.0, M10x1.0, M10x1.25.
Contains:
2 pcs Tap: M3x0.5, M4x0.7
2 pcs Drill: 2.5x120mm, 3.3x140mm
2 pcs Thread Rod: M4x0.7x175mm
1 pcs Thread Rod: M3x0.5x175mm
3 pcs Extraction Nut
3 pcs Extraction Adaptor: M8x1.0, M10x1.0, M10x1.25
3 pcs Guide bolt: M8x1
3 pcs Guide bolt: M10x1.0
3 pcs Guide bolt: M10x1.25

Made in China