Magma

3/8" Dr. Oxygen Sensor Socket 22mm (Narrow Slot), 50625A

Material: Cr-V
6-pt, 3/8”Dr.
Overal length: 80 mm
Slot size: 8 mm
Used with 26 mm Combination wrench

Made in China

3/8" Dr. Oxygen Sensor Socket 22mm (Wide Slot), 50625

Material: Cr-V
6-pt, 3/8”Dr.
Overal length: 80 mm
Slot size: 20 mm
Used with 26 mm Combination wrench

Made in China

Fuel injection test set, 50199

The car fuel pressure diagnostic kit is suitable for most vehicles with a fuel injection system with petrol or gas engines (except Bosch, CIS Jetronic, Throttle Body Systems on GM cars).
Not suitable for diesel engines with high pressure injection pump or direct injection engines due to the low pressure range of the manometer.
Fuel pressure testing is an essential part of the fuel injection system troubleshooting process.
Contents:
The set is equipped with various fittings and connection hoses for testing.
15 "length hose is used for direct connection to 1/4" SAE standard fuel pump shredder valve
An 8 "length hose is for the M6 ​​fuel pressure test hole, and there are also adapters M8; M10; M12; M14 for the corresponding test port on fuel rail.
Aluminum tee to support the connection between the fuel pump and the engine for most cars.
Manometer, protected with a rubber shell, with a diameter of the dial 3-1 / 2 ", with a range of 0-10bar (0-140psi) and two-color coded scale for easy reading. The hoses use rubber nylon resin and the built-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16 "fuel drain hose help to safely release the pressure and easily restore the fuel.
Fuel pump pressure check:
The manometer is designed to easily and quickly check the pressure of the fuel injection pump and the fuel flow.
You can compare the pressure value with the manufacturer's recommended reference range to help diagnose the petrol engine system.
Low fuel pressure can be caused by kink/leak/clog on inlet supply side components, a bad fuel pump or regulator, low tank pressure
High fuel pressure may be caused by a bad fuel pressure regulator or kincked outlet return line.

Made in China

BMW N47 High Pressure Pump and Crankshaft Locking Tool, 50534

The BMW N47 high pressure pump and crankshaft locking tool is specially designed to position and lock high pressure pump to crankshaft when replacing timing chain.

Application: BMW N47 engine.

OEM No.: 2285671

Made in China

Secure your VAG 1.8 & 2.0 TSi/TFSi engines with the 50532 Vibration Damper Holding tool. This comprehensive kit, equivalent to OEM T10531, ensures precise crankshaft and vibration damper maintenance.

Includes:

• Vibration damper holding tool OEM T10531/3
• Crankshaft sprocket holding tool adapter OEM T10531/2
• Crankshaft sprocket holding tool OEM T10531/4
• Crankshaft sprocket holding tool nut

BMW N47; N57 Crankshaft Pulley Holder, 50531

Used for dismantling and replacing the damper disc on BMW N47; N57.
For fixing  the crankshaft pulley when loosening or tightening the center pulley bolt.
OEM No. 117220

Made in China

BMW S54 Engine Camshaft Timing Tool Set, 50526

Description:
OEM 11 9 140 - Valve timing checking tool
OEM 11 9 130 - Camshaft Setting Tool
OEM 11 7 342 - Camshaft setting tool pins
OEM 11 7 160 - VANOS alignment lever
OEM 11 2 300 - Crankshaft Locking Pin
OEM 11 9 170 - VANOS Spacers
Application:
BMW M3 Cabriolet 2000-2006, M3 Sports Coupe 1999-2006, M3 CSL Sports Coupe 2003-2004
Plus Z3 (M) E36 2000 onwards, Z4 (M) E85/E86 2006 onwards

Made in China

SUBARU 2.0; 2.5L и SAAB Camshaft Locking Tool, 50514

Applicable:
Subaru WRX and STi with 2.0L or 2.5L (2002+ )DOHC Turbo engines (EJ205, EJ207, EJ255, EJ257)
Subaru Forester XT (2003-2012)  with DOHC Turbo engines
Subaru Liberty GT (2004-2009) with DOHC Turbo engines
Subaru Outback XT (2004-2009) with DOHC Turbo engines

Saab 9-2X Aero (2005-2006) with DOHC Turbo engines

Made in China

Hyundai/Kia, 2.5 diesel – High Pressure Fuel Pump Sprocket Remover, 50510

This tool is designed to hold the timing chain in place while removing the high pressure pump.
Applicable:  Hyundai/Kia
Models:
Hyundai iLoad (TQ; 2007-present)
Kia Sorento BL (2003-2009)
Motors:
Hyundai D 2.5 TCI-A, Hyundai D 2.5 TCI-A2
Kia D 2.5 VGT, Kia D 2.5 WGT
OEM: 09331-4A000, 093314A000

Made in China

VAG 1.8/2.0L Balance shaft puller, 50176

For the safe removal of the balance shafts, fitted VAG 4-cylinder chain drive 1.8 and 2.0 injection engines.
Internal thread M8 x 1.25 for sliding hammer.
OEM tool: T10394
Applicable: VW, Audi, Seat, Skoda
VW:
VW Passat (2007-2017); VW Scirocco (2008-2017); VW Sharan (2011-2017); VW Tiguan (2007-2016); VW Beetle (2013-2017); VW CC (2012-2015); VW Eos (2008-2015); VW Polo (2014-2017); VW Touran (2015-2017); VW Golf (2007-2017); VW Jetta (2011-2014)
Audi:
Audi A1 (2015-2017); Audi A3 (2007-2017); Audi A4 (2007-2017); Audi A5 (2007-2017); Audi A6 (2012-2017); Audi A7 (2014-2017); Audi A8 (2012-2014); Audi Q3 (2011-2017); Audi Q5 (2008-2017); Audi TT (2008-2017); Audi Q7 (2015-2017); Audi S1 (2014-2017); Audi S3 (2013-2017)
Seat:
Seat Altea (2006-2015); Seat Exeo (2010-2013); Seat Ibiza (2015-2017); Seat Leon (2007-2017); Seat Toledo (2007-2017)
Skoda:
Skoda Octavia (2007-2017); Skoda Superb (2008-2017); Skoda Yeti (2009-2015)
Engine code:
1.8: BZB, CDAA, BPU, BYT, CABA, CABB, CDHA, CDHB, CABD, DAJB, CJSA, CJSB, CJEB, CJEE, CJED, CYGA, DAJA, CDAB, CJSC, CGYA
2.0: CAWB, CCZA, CBFA, CCTA, CDNB, CDNC, CFKA, CHJA, CCZC, CPSA, CESA, CETA, CNCD, CYRB, CYRC, CNCE, CYNB, CYPA, CYPB, CULB, CULC, CNCB, CWZA, CJXF, CJXC, CJXB, CJXG, CHHC, CCZD, CJKA, CJKB

Made in China

14 mm 3/8”Dr. Spark plug socket, 50007F

Ideal for Installing and removing spark plugs.
Special spring clip design to hold the spark plug.
Size: 3/8" Drive x 14m
12-Point
Material: Cr-V

Made in China

Porsche Cayenne M97/01 Camshaft tools, 50869

Features: For correct fixing the camshaft of the Porsche Cayenne M97 / 01 when replacing the timing belt.
Applicable: Porsche 4.5L with M97/1 engine
OEM No.: 9678

Made in China

Fuel Injection Pump Sprocket Locking Tool - Ford Mondeo / Transit, 50940

Features: To lock the fuel injection pump sprocket during fuel pump removal and installation. Suitable for Ford Duratorq(Puma) 2.0, 2.2, 2.4 diesel engines.
Applications:
Ford Mondeo (10/2000-02/2007)
Ford Transit (01/2000-05/2006)
Ford Transit (04/2006-)
Engines:
2.0L Duratorq-DI Puma Diesel
2.0L Duratorq-TDCi Puma Diesel
2.0L Duratorq-TDDi Puma Diesel
2.2L Duratorq-TDCi Puma Diesel
2.4L Duratorq-DI Puma Diesel
2.4L Duratorq-TDCi Puma Diesel
2.4L Duratorq-TDDi Puma Diesel
OEM#: 303-1151

Made in China

VAG Coolant Pump Thermostat Wrench, 50907

Features: To easy removal and installation of thermostat without causing any unnecessary damage.
Applicable: Audi A3 2013> , VW Golf 2013 >, Skoda Octavia 2013 >, Seat Leon 2013>
Engines: 1.0 TFSi 3-cyl, 1.2 TSi, 1.4 TFSi, 1.4 FSi, 1.4 TDiCR 3-cyl.
OEM Tool: T10508

Made in China

VAG Camshaft Gear Locking Tool - Camshaft sprocket locking tool, 50890

Features: For locking the camshaft in adjusting position required for checking and adjusting the engine timing
Applicable:
Seat Mii 1.0 (3 cylinder) - (from 2012)
Skoda Citigo 1.0 (3 cylinder) - (from 2011)
Volkswagen Up 1.0 (3 cylinder) - - (from 2011)
Engine code: 1.0 CHYA (44 kW), 1.0 CHYB (55 kW), 1.0 CPGA (50 kW)
OEM Tool: T1047

Made in China