Magma

Ford 2.0 TDCi Ecoblue Diesel - Engine Timing Tool Set, 50537

Features:

Designed to fit the new generation Ford 2.0 TDCi EcoBlue engine which features an innovative "belt in oil" design where the synchronous drive belt is sited inside the oiled area of the engine.

Content:

Flywheel Holding Tool - OEM №: 303-1643

Crankshaft Alignment Tool - OEM №: 303-1637

Installation Cups - OEM №: 303-1650

Alignment Pins 6 mm (3x)

Applicable:

Ford Focus (since 2018)

Ford Galaxy (since 2018)

Ford S-Max (since 2018)

Ford Ranger (since 2019)

Ford Transit (2016-2018)

Ford Transit Custom (2016-2019)

Ford Tourneo Custom (2016-2018)

Engine Codes:

2.0 TDCi: YLFS, YMFS, YNFS, YLF6, YMF6, YNF6, YLR6, YMR6, YNR6

Made in China

Vauxhall/Opel 2.0CTDi - Diesel Engine Timing Tool Kit, 50533

Features:

For the replacement of the timing chain within the cylinder head.

For locked the camshafts into their timed position during timing chain replacement.

Application: Vauxhall/Opel 2.0 CDTi - LFS/B20DTH, LFS/B20DTR (2.0 CDTi from 2014).

Models: Antara (from 2016), Cascada (from 2015), Insignia-A/Country Tourer (2014-2017), Insignia-B/Country Tourer (from 2017), and Zafira-C Tourer (from 2014); CDTi EcoFLEX Blueinjection.

OEM# EN 51415, EN 51418.

Made in China

Volvo Ford 1.8 2.0 - Crankshaft Pulley Holding Tool, 50521

Also suitable compatible with some Volvo vehicles.

Applicable:

Ford: C-MAX (07-10), Fiesta (95-12), Focus (98-11), Focus C-MAX, Galaxy (06-12), Mondeo (93-12), S-MAX (06-12), Transit (06-12)

Volvo: C30 (06-12), S40 (06-12), S80 (07-11), V50 (04-12), V70 (07-11)

Engine Codes: AOBA, AOBC, AODA, AODB, AODE, AOWA, AOWB, B4184S8, B4184S11, B4204S3, B4204S4, CDBB, CGBA, CGBB, CHBA, CHBB, CJBA, CJBB, CSDA, CSDB, GZFA, GZFB, GZFC, N4JB, Q7DA, QQDA, QQDB, QQDC, SEBA, SEWA, SYDA, TBBA, TBBB, TBWA, TBWB

OEM No.: 49 B011 105

Made in China

Citroen/Peugeot/Fiat/Ford - Belt Tension Wrench, 50516

Facilitates the pre-tensioning and locking of V-ribbed belt tensioners.

For the removal / installation of the V-ribbed belt in - situ on the vehicle even in very limited space condition.

Suitable for Citroën / Peugeot / Fiat / Ford 1.4L and 1.6L diesel engines.

Applications include: Citroën, Peugeot, Ford & Fiat 1.4 & 1.6 diesel engines.

Citroën: Berlingo, C1, C2, C3, C3 Picasso, C3 Pluriel, C4, C4 Picasso, C5, DS3, DS4, Xsara & Xsara Picasso.

Peugeot: Partner III, 206, 207, 308, 508, 3008, 5008.

Engines covered include DV4 & DV6 engines.

Engines: 1.4-1.6D

OEM No.: 0188-Z , G.0194-E3

Made in China

Land Rover, Ford DOHC 2.2 Diesel - Balance Shaft Timing Tool Set, 50422

Special set of tools for checking, holding and locking the balancing shafts, DOHC 2.2 diesel engines with belt drive of Ford and Land Rover.

Engine codes:

Ford Q4BA and Q4WA 2.2 diesel in Galaxy, SMAX and Mondeo 2008-2015.

JLR & PSA DW12 in Freelander II (2006 - 2015)

Range Rover Evoque (2011 - 2015).

Application:

Ford: Galaxy, S-MAX, Mondeo

Engine: 2.2 TDCi

Engine codes: KNWA, Q4BA, KNBA, KNBB

Land Rover: Freelander, Range Rover Evoque, Discovery Sport

Engine: 2.2TD4, 2.2SD4, 2.2eD4

Engine codes: DW12CTED / 22DT, DW12CTED4, 224DT

OEM №: 303-1328 / 0190D; 303-1329; 303-1330

Made in China

Twin Clutch Dry Transmission Remover and Installer, 50295

Description:

Special designed to disassembly dry transmission and align the twin-clutchto change the oil seal


Applicable: VOLVO, FORD,  DPS6 transmission

OEM №: 307675.


Instruction:

Install the special tool and compress the input shaft. Turn the threaded bar 20 turns after it makes contact with the input shaft.

Made in China

Opel Vauxhall 1.3 CDTi - Diesel Engine Timing Tools, 50286

Applications on Corsa E 1.3 Diesel since 2015, include:

Vauxhall/Opel Agila, Agila B, Astra G, Astra H, Combo C, Corsa D, Meriva A, Meriva B, Tigra B, Zafira B.
Alfa Romeo Milto
Fiat 500, 500C, Doblo, Doblo cargo, Fiorino, Grande Punto, Idea, Linea, Panda, Panda classic, Punto Evo, Qubo.
Ford Ka.
Lancia Musa, Ypsilon.
Peugeot Bipper.
Suzuki Ignis, Splash, Swift, Wagon R+.

OEM №: KM-662-C, EN-50515, EN-51500, EN-46775, KM-955-1, EN-46785

Made in China

VAG Ignition Coil Remover, 50281

For removing ignition coils on VAG models as of 2013

Pencil type for inserting in mounting hole of the ignition coil suitable for 4 cylinder 1.2 / 1.4 / 1.8 / 2.0 FSI / TFSI engines built in e.g. VW Golf, Audi A3, Seat Leon, Skoda Octavia

OEM № T10530

Made in China

Tire Valve Core Removal Tool, 50987

Ideal for fast removal and installation of core without damage from a wheel valve.
Robust Steel Shaft with corrosion resistant plating and durable plastic handle.
Suitable for motorcycles, cars, bikes and commercial vehicles.
Lenght: 170mm

Made in China

45° Angled Flat Band Hose Clamp Pliers, 50280

Used to remove and install flat band hose clamps.

45° Angled feature provides easy access to clamps located in hard-to-reach areas.

Ratcheting lock mechanism holds the clamp in an open position for easy removal and installation.
With Comfortable handle with ergonomic grip.

Length: 220mm

Made in China

Wire Hose Clamp Pliers, 50279

Used to remove and install wire hose clamps.

Ratcheting lock mechanism holds the clamp in an open position for easy removal and installation.
With Comfortable handle with ergonomic grip.

Length: 220mm

Made in China

Plastic Rivet Clip Removal Plier, 50944

Designed to remove reusable two-part plastic rivets, such as those used on plastic trims or door trims.
The head can be adjusted from 0° - 90° to achieve the correct angle to extract the centre locking clip.
Length: 230mm.
Steel construction.
Dipped handles.

Made in China

Flat Band Hose Clamp Pliers, 50278

Used to remove and install flat band hose clamps.
Ratcheting lock mechanism holds the clamp in an open position for easy removal and installation.
With Comfortable handle with ergonomic grip.
Length: 220mm

Made in China

2 Pcs Wire Terminal Removal Tool, 50923

Designed to remove wire terminals from terminal blocks without damage.
Provide 12 different tool styles fit most common connectors.
Grey tool removes wires from terminals and red tool designed for Pack-Con and Weather-Pack terminals on GM C3 systems and retrieval of trouble codes from engine computer on some GM vehicles.

Made in China

PCD Gauge, 50918

For measurements the hole circle on steel and aluminum rims.
Greatly facilitates the determination of the hole circle.
Suitable for 4, 5, 6 and 8 lug rims.
4-Lug: PCD 4x98mm, 4x100mm, 4x108mm, 4x110mm, 4x120mm, 4x130mm, 4x140mm, 4x4.5"
5-Lug: PCD 5x100mm, 5x108mm, 5x112mm, 5x115mm, 5x120mm, 5x130mm, 5x135mm, 5x150mm, 5x4.5", 5x4.75", 5x5.0", 5x5.5"
6-Lug: PCD 6x135mm, 6x4.5", 6x5.0", 6x5.5"
8-Lug: PCD 8x170mm, 8x6.5"

Made in China