Magma

VAG - Turbo Actuator Adjustment Set, 50751

This tool set is designed for the professional loosening, adjustment and tightening of the control rod when removing/installing the pressure capsule along with the charge pressure actuator position sensor on VAG 2.0L Common Rail Diesel engines.
Application:
Golf Ml V1 (2008 - 2013), Golf Plus (2004 - 2015), Jetta (2004 - 2010), Passat (2005 - 2010), Passat CC (2008 - 2012), Scirocco (2008 - 2017), EOS (2006 - 2015), Tiguan (2007 - 2018), Transporter T5 (from 2009).
Set contains:
1 Pc 1/4" Dr. Socket 10mm, OEM T10422
1 Pc 12pt Spanner 10 x12mm, OEM T10423

Made in China

VAG 1.8L & 2.0L TFSi/TSi - Crankshaft Pulley Holding Tool, 50739

Used for holding crankshaft pulley/vibration damper when crankshaft central bolt is loosened or tightened.
Specially shaped & hardened pins help prevent the tool falling out when under load.
Application:
1.8L & 2.0L TFSi/TSi petrol engines found in the VAG vehicles (from 2006 onwards).
Overall length 34" (863 mm)
OEM#: T10355

Made in China

Engine Oil Filling Funnel Set, 50731

2 litre funnel with 6 adaptors to fit a wide range of vehicles.
Allows for fast oil filling without spillage or waste.
Great for many late model vehicles with internal baffles.
For pouring oil where access is difficult.
Angled extension and adapters are made of plastic.
Contents:
1 pc 2 liter funnel.
1 pc angled plastic extension.
1 pc bayonet adapter for Audi, BMW, Dodge, Mercedes-Benz, Porsche, Volvo, VW.
1 pc threaded adapter M42x4.5 for Subaru.
1 pc threaded adapter M37x3.0 for Toyota, Lexus, Scion, Pontiac.
1 pc threaded adapter M35x4.0 for Mazda.
1 pc threaded adapter M32x3.5 for Dodge, Honda, Acura, Nissan, Jaguar, Ford.
1 pc bayonet adapter for Toyota and Lexus with 3.0/3.3L V6 engines

Made in China

9pcs Pick and Hook Set, 50208

Features:
Suitable for pin/clip picking, hose removal and gasket scraping.
Ergonomically styled handles for comfort, grip and accuracy.
Lengths: 165mm and 260mm
Contents:
4 x Short Picks with satin finished steel shafts
4 x Large Picks with black finished steel shafts.
1 x Large Scraper with black finished steel shaft.
Material: Alloy Steel

Made in China

7 pcs Glow Plug Puller Kit, 50646

Designed for extracting failed glow plugs.
Contents:
External grip (7.7mm internal Ø ) Includes size 4 (6.0mm) contraction collet.
External grip (6.8mm internal Ø ) Includes size 3 (5.0mm) contraction collet.
Contraction collet: Size 3 (5.0mm).
Contraction collet: Size 2 (3.6mm).
Contraction collet: Size 1 (2.7mm).
T -bar slide hammer/puller.
Internal (expansion collet) puller.

Made in China

The Universal Valve Spring Install Remove Tool 50610 allows you to easily remove valve springs and valve stem seals on the vehicle without removing the head. It's a huge time saver and works great in narrow engine bays where space is limited!

This tool is compatible with European, American, and Japanese cars, including Mercedes Benz, BMW, Volvo, Toyota, Mitsubishi, VW, and Ford.

• Wide Compatibility: Suits a variety of car models.
• Time Saver: Allows valve spring removal without head removal.
• Engine Compatibility: Designed for specific Mercedes Benz & BMW engines.

6 Pcs Spiral Flute Screw Extractor Set, 50051A

Used to remove broken screws, bolts and studs.
Material: Cr-Mo
Contents:
M3-M6 (1/8"-1/4")
M6-M8 (1/4"-5/16")
M8-M11 (5/16"-7/16")
M11-M14 (7/16"-9/16")
M14-M18 (9/16"-3/4")
M18-M25 (3/4"-1")

Made in China

Mercedes-Benz 9G-Tronic Transmission - Oil Drain and Refill Set, 50569

Designed for draining and refilling ATF on Mercedes-Benz 9-speed automatic transmissions (type 725.0)
Special design for leak-free and spill-free ATF services
Refill adapter shall be used with an ATF refill pump and tank

OEM №: 725 589 02 90 00, 725 589 00 90 00

Made in China

6 Pcs Broken Screw Extractor Set, 50051

Used to remove broken screws, bolts and studs.
Material: Cr-Mo
Contents:
M3-M6 (1/8"-1/4")
M6-M8 (1/4"-5/16")
M8-M11 (5/16"-7/16")
M11-M14 (7/16"-9/16")
M14-M18 (9/16"-3/4")
M18-M25 (3/4"-1")

Made in China

Renault/Nissan V6 3.0 DCi V9X - Engine timing tool set, 50549

Applicable:
Renault: Renault Espace, Renault Vel Satis, Grand Espace 4, Renault Master
Nissan: Nissan INFINITY, Nissan Navara, Nissan Pathfinder (R51)
Engine:
Renault 3.0 DCI, Nissan / Infiniti - 3.0 D
Engine Code: V9X

Made in China

Crankshaft Turning Tool, 50535

Used for turning the crankshaft pulley.
With 1/2" drive, 22mm square, and 12mm rotating pivot pin.
Application:
Audi A6 2005 and up
Audi A8 2003 and up
Engine: 6 cylinder 2.4, 3.2L FSI.
OEM №: T40058

Made in China

Fiat  1.4 12V - Engine Timing Tools, 50529

Designed specifically to allow the cam and crankshaft to be aligned when setting the engine timing on the 1.4L 12 valve petrol engines found across the Fiat and Lancia ranges from 1995 to 2000.
Designed specifically for the 1.4 12v engine.
Application:
Models:
Fiat 1.4 12v engine, Fiat Brava, Brao, Marea Weekend(95-00)
Lancia Ypsilon
Engine code: 1.4 12v - 182 A3.000, 182 A5.000
Contents:
Camshaft locking tool (OEM Ref 1 860 899 000)
Crankshaft timing tool (OEM Ref 1 860 901 000)
NOTE: The Camshaft locking tool will only fit the OEM camshaft found in the engines codes listed.

Made in China

VAG crankshaft Pulley/Damper Puller, 50506

This removal tool must always be used to separate the vibration damper from the gear wheel of the crankshaft. Working on 4 cylinder common 2.0L, required for the damage free removal of the vibration damper with internal thread.
Applications:
Volkswagen T6/Transporter (from 2017).
Engine: 4 cylinder common rail 2.0L.
OEM №: T50071.

Made in China

Motorcycle Chain Breaker and Riveting Tool, 50402

For Breaking / Pressing and Riveting Motorcycle Drive Chains - 520; 525; 530; 532
Tool can be secured using a vice or spanner
Contents 3; 4 and 5mm Pins

Made in China

Alfa Romeo Twin Spark Twin Cam Belt Drive - Petrol Engine Setting/Locking Kit, 50327

For 1.4, 1.6, 1.8, 2.0 16v Twin Cam - Belt Drive
Contents:
Camshaft setting plates for locking the camshafts in the timed position. The plates are positioned in place of the camshaft bearing caps.
Timing and balance shaft belt tensioner adjusters.
Applicable:
Alfa Romeo Twin Spark:
1.4/1.6 Engines - 145/146/155/156 (96-01)
1.8 Engines - 145/146, (96-01), 155/156 (96-06),
Spider/GTV (98-01):
2.0 Engines - 145/146 (96-01), 147 (01-07), 155/156 (95-02), 166 (98-01)
Spider/GTV (96-03)
1.4/1.6 Engines - 145/146/155/156 (96-01),
1.8 Engines - 145/146, (96-01), 155/156 (96-06), Spider/GTV (98-01),
2.0 Engines - E145/146 (96-01), 147 01-07, 155/156 (95-02), 166 (98-01),
Spider/GTV (96-03)
Plate Applications:
Purple; 1.4, 1.6, Blue; 1.8, 2.0
OEM №: 1825041000, 1825042000, 1822154000, 1822149000
Engine code:
162.01, 321.04, 322.01, 322.05, 323.01, 323.10, 335.03, 372.03, 671.06, 672.04, 676.01

Made in China