Magma

Timing tool set for Ford Duratorq – chain drive, 50325

Set contains camshaft, flywheel, injection pump & tensioner locking pins plus removal & installing tools for the injection pump sprocket retaining & access cover plate set.

2.0 & 2.4 Litre Dutotorq & 3.2 Litre BT50 / Ranger (Puma Engines) & Some Landrover.

Application:
Models: Ford: Mondeo 2.0L, 2.2L, 2.4L TDdi / TDci (01-07), Transit 2.0L, 2.2L, 2.4L TDDi / TDCi (00-08)
Engines: ABFA, D3FA, F3FA, D5BA, D6BA, FMBA, FMBB, FIFA, HJBA, HJBB, HJBC, HJBE, N7BA, N7BB, SDBA, QJBA, QJBB, QJBC, QJBD, QJBS, D2FA, D4FA, D0FA, F4FA, FXFA, H9FA, H9FB, JXFA, PHFA, ZSD424ALSO
Suited to Jaguar X-Type 2.0L | 2.2L D (03-08) fitted with FMBA, FMBB, QJBA, & LDV Convoy 2.4L TD / TDi (02-06) fitted with ZSD424 engines

4 pcs Diesel injector socket set, 50322

Special socket for removing and installing of diesel injectors.
Set contains:
1 pc 1/2" Dr. x 22mm(6 point ), 110mm long.
1 pc 1/2" Dr. x 22mm(12 point ), 80mm long.
1 pc 1/2" Dr. x 27mm(12 point ), 80mm long.
1 pc 1/2" Dr. x 28mm(12 point ), 78mm long...

Clutch Alignment Tool Universal, 50840

For easy alignment of single plate clutches. Also suitable for flywheels with no pilot bearing.
Additional Information
    For single plate clutches.
    Suitable for flywheels with or without pilot bearing.
    Fast to fit and remove.
    Universal applications.
    Size of collets: 14 mm - 28 mm across 3 adaptors. Cone size range from 35mm < 67mm.

Engine Timing tool kit -  BMW  N47; N47S; N57, 50070

Suitable for setting the camshaft in diesel engines with chain drive. For turbocharged BMW 4 & 8 cylinder diesel engines with the motor identification letters N47, N47S, N57 or N57S.

Set includes:
Crankshaft lathe – OEM No. 116480
Camshaft locking – OEM No.  118750
Camshaft lock OEM 118760
Sprocket Puller OEM 118740/118741
Crankshaft wheel locking pin OEM 115320
Crankshaft holding tool OEM 114320
Crankshaft locking tool OEM 118790
2 x piece pin to lock the chain tensioner OEM 113340

Applicable :
For BMW
Series 1: 116d 118d 120d 123d (E81, E82, E87, E88, F20)
Series 3: 316d 318d 320d 325d 330d (E90, E91, E92, E93, F30)
Series 5: 520d 525d 530d 530d 535d 535d GT GT M550d (E60, E61, F07, F10, F11)
Series 6: 640d (F12)
Series 7: 730d 740d 750D (F01)
Series X1: 1.8d, 2.0d, 2.3d, (E84)
Series X3: 1.8d, 2.0d, 3.0d, 3.5D (F25, E83)
Series X5: 3.0d, 4.0d, M5.0d, (E70)
Series X6: 3.0d ; 4.0d; M5.0d, (E71)

Engine Codes:
2.0 N47 and N47S (2007-2015)

Made in China

BMW Vanos Sprocket turning wrench for M50 and M52 engines, 50053

Features: Used to adjust Vanos position on the BMW M50 and M52 engines.

Applicable: BMW E36 320i; E34 520i; E36 325i; E34 525i; E46 328i;

Engine codes: M50B20, M50B25, M52B28, S50B30US, S52B32

OEM No.: 115490

Made in China

Audi Oil Dipstick, 50931B

Designed to measure the engine oil levels on Audi vehicles fitted with electronic oil level systems.

Designed to measure the engine oil levels on Audi vehicles fitted with electronic oil level systems.
Can also be used to calibrate the driver's instrument panel.
Application: Audi 2.0 TFSI, 3.2 FSI, 3.0 Supercharged, 4.2 FSI, 2.0 TDI CR.

Made in China

Pump Removal Tool BMW N47/N47S and N57, 50880

Used to remove fuel pump.

Suitable for BMW N47/N47S, N57 engines.
OEM No.  118740
Made in China

Engine Timing Tool Set-Mercedes M133 / M270 / M274, 50858

Designed for disassembling and assembling of the camshafts on vehicles fitted with the chain driven 1.6/2.0 direct injection petrol engine.
Content:
Camshaft clamping assembly (chain end) + fixing bolts (OEM 270589006100)
Camshaft clamping assembly (gearbox end) + fixing bolts (OEM 270589006100)
Small diameter camshaft blocks (OEM 270589006100)
Special Star socket bit T100 for the camshaft pulleys (OEM: 270589006100)
Application: 
Mercedes-Benz M133, M270, M274. 
These engines are found in the late A Class, B Class CLA, C Class and E Class vehicles.
Models:
Mercedes A-Class 176 1.6/2.0 (since 2012)
Mercedes B-Class 242/246 1.6/2.0 (since 2012)
Mercedes CLA 117 1.6/2.0 (since 2012)
Mercedes C-Class 204 1.6/2.0 (since 2011)
Mercedes C-Class COUPÉ 1.6/2.0 (since 2011)
Mercedes E-Class 212 1.6/2.0 (since 2011)
Engine Codes: M133; M270; M274

Made in China

5pc Spiral Flute Screw extractor set, 50226A

Features: For removing sheared off screws and bolts (M3 - M18)

Contents:

• 1/8" - 1/4" (M3 - M6)
• 1/4" - 5/16" (M6 - M8)
• 5/16" - 7/16" (M8 - M11)
• 7/16" - 9/16" (M11 - M14)
• 9/16" - 3/4" (M14 - M18)

Made China

Engine Timing Tool - Renault/Nissan & Vauxhall/Opel 2.0/2.3 DCi/CDTi-M9R/M9T – Chain drive, 50828

Timing Setting and Locking Tool Kit for 2.0/2.3 DCi/CDTi Chain Drive Engines. Fitted for Nissan, Renault and for Vauxhall /Opel Vehicles, with M9R & M9T Engine Codes
To keep Camshaft, Injection Pump Shaft, Crankshaft in a Specific Position when changing a Timing Belt, or during other Engine Repairs and to Remove and Replace the Injection Pump.

OEM Tools: MOT1766, M0T1769, MOT1770, MOT1773, EN-48330, EN-48332, EN-48334, EN-48831, KM-6130

Application:
Renault:
Espace/Grand Espace IV (06-10), Kaleos (08-11),
Laguna ll (05-07), Laguna lll (07-12), Master lll (10-12),
Magane ll (06-10), Scenic/Grand Scenic ll (06-09),
Scenic/Grand Scenic lll (09-12), Trafic ll (06-12), Vel Satis (05-10), Nissan: Primastar X83 (06-10), Qashqai/Qashqai+2 J10 (07-10),
X-Trail T31 (07-12);
Vauxhall/Opel: Movano-B (10-12), Vivaro (06-12)
Engine code:
M9R 2.0dCi: 610, 615, 630, 700, 721, 740, 742, 760, 761, 762, 763, 780, 782, 784, 786, 788, 800, 802, 803, 805, 808, 816, 830, 832, 833;
M9T 2.3dCi: 670, 672, 676, 678, 680, 686, 690, 692, 694, 698

Made in: China

5pc Screw extractor set, 50226

Features: For removing sheared off screws and bolts (M3 - M18)

Contents:

• 1/8" - 1/4" (M3 - M6)
• 1/4" - 5/16" (M6 - M8)
• 5/16" - 7/16" (M8 - M11)
• 7/16" - 9/16" (M11 - M14)
• 9/16" - 3/4" (M14 - M18)

Made China

Engine timing tool set – FIAT 1.3 JTD, 50824

Applications:
Alfa Romeo
MiTo / Fiat: 500, Albea (TR), Doblo/Cargo, Fiorino, Grande Punto, Idea, Linea, Panda, Puntı, Punto Evo
Ford: Ka Lancia: Musa, Ypsilon
Suzuki: Splash, Swift, Wagon R+ Ignes
Vauxhall Opel: Agila, Agila B, Astra-H, Astra-J, Combo-C, Corsa-C, Corsa-D, Meriva-A, Meriva-B, Tigra-B

Made in China

1/2" Dr. Wheel Nut Socket for Mercedes-Benz, 17mm, 50827

Features:
For safe and effective removal of the Convex ("flower head") wheel bolts on late Mercedes models.
With plastic cover for perfect protection of aluminium rims.
Made from Cr-Mo steel.
Size: 17mm, 85mm long.
Application: Mercedes-Benz C-Class / GLK (W204), E-Class (W211, W212, W207), SLK (W172), M-Class (W164, W166), CL-Class (W216), S-Class (W221, W222) and Maybach.

Made in China

Oil filter wrench Hyundai & Kia 2.0L; 2.2L, 50518

Features: For Hyundai & Kia vehicles fitted with 2L or 2.2L diesel R-engines.
Applicable:
Hyundai: IX35 (from 2009) & Santa Fe/Maxcruz (from 2012).
Kia: Sportage (R) (from 2011) , Sorento (R) (from 2010), Carnival/Sedona (from 2010).
1/2"D x 6pt profile.
42 mm across flats.

Made in China