Magma

2-Jaw Gear puller 150х150, 50141B

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 150 mm
Axis width: 150 mm

Made in China

Diesel engine setting/locking set - VAG 2.4/2.5D Sdi/Tdi/TDiCR- belt drive, 50660

This engine timing locking tools use for synhronization on Volkswagen 2.4D with engine codes AAB, AJA (02/95-03).

• The correct alignment is achieved by placing equal thickness of shims between both ends of the bracket and the cylinder head Camshaft Setting Strap is used to set the correct timing position of the camshaft.
• The centre Part of the bracket fits into the slotted end of the camshaft and the ends of the bracket located on the cylinder head.
• Injection Pump Pulley Setting Spigot is 15.4mm in diameter and is used on engines with a one piece injection pump sprocket.
• The crankshaft damper holding tool prevents the damper from rotating whilst unfastening and refastening the centre bolt.
• This tool should be used with 3/4" Dr. power bar. VW group 2.5TDi common rail diesel engines (belt) in VOLKSWAGEN LT Crafter BJJ, BJK, BJL and BJM engines.
Included:
Crankshaft Damper Holding Tool
Crankshaft Setting Strap
Injection pump setting spigot
Shims (2)
Tensioner Adjuster
Crankshaft Locking Pin
Applications: VW: Crafter (2006-2013), LT (1996-2006), Transporter (1990-2003)
OEM Tools: T10025/3248/3419, T50009, 2064, 2065A, 3355
2.4D: AAB, AJA
2.5D SDi: AGX
2.5D TDi: ACV, AHD, AHY, AJT, ANJ, APA, AUF, AVR, AXG, AXL, AYC, AYY, BBE, BBF
2.5 TDi CR: BJJ, BJK, BJL, BJM
2.5 BlueTDi CR: CEBA, CEBB, CECA, CECB

Made in China

2-Jaw Gear puller 200х150, 50141C

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 150 mm
Axis width: 200 mm

Made in China

3 pcs Timing belt double pin wrenches tools set – VW, Audi, 50612

Applications :
Lupo Polo 1.4 TDi PD
Golf, Bora, Polo 1.9 TDi, PD
Beetle, Sharan 1.9 TDi PD
Passat 1.9 TDi PD
AudiA2 /A3 1.4 / 1.9 TDi PD, A4 / A6 1.9 TDi A4 / A6/A8  ALLROAD 2.5 V6TDi

5 pcs Inner bearing puller, 50140

The kit consists of a slide hammer (2 Lb-980 g) and a set of extractors of various sizes needed to pulling internal bearings.
Capacity: 3/8 "(10mm) - 1-1 / 4" (32mm)
Contents:
Slide hammer - 980 g
Bearing extractor: 3/8 "to 1/2" (10 mm-14 mm)
Bearing extractor: 9/16 "to 11/16" (15mm-19mm)
Bearing extractor: 5/8 "to 1" (18mm-25mm)
Bearing extractor: 1 "to 1-1 / 4" (25mm-32mm)
Come with a carry case.

Made in China

Extra long Oxygen sensor socket 22 mm, 50491

Material: CR-MO
Suitable for: BMW, Ford, Mercedes Benz C and E class (602, 605, 606 engines), Opel, Rover, VAG, Volvo, VW, Audi, Skoda, Seat.

1/2 ", Size: 22 mm, L = 150 mm

7 pcs air conditioning A/C fuel line disconnect tool set, 50129

Features: Easily disconnects air conditioning lines and quick connect fuel lines 
Specification:
- Simple assembly and disassembly of quick connectors for automotive air conditioning duct and fuel pipelines, easily disconnected;
- Practical, easy, and affordable;
Weight”116 g 
Sizes: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"

Made in China

Engine timing tool set Ford Focus/Cmax 1.6 Ti-VCT, 50305

Features: Designed to locking  the main components of the 1.6 Ti-VCT engines when changing the camshaft belt on Ford cars.
Applicable to Ford Focus / Cmax 1.6 Ti-VCT petrol engines with engine code HXDA (2003-2007) and Ford Focus / C-MAX / Mondeo / C-MAX / 2.0 TDCi diesel engines with G6DA engine code, G6DB, G6DC 2003-2007.
Contains the following OEM tools:
OEM 303-1097
OEM 303-1054
OEM 303-1059
OEM 303-748
OEM 303-735

Made in China

Valve spring compressor master set, 50103

Applicable to: OHV & OHC gas or diesel engines of the following vehicles:
Audi (4 and 5 cylinder), BMW, Chevrolet, Chrysler, Ford, GMC, Honda, Hyundai, Infiniti, Lexus, Lincoln, Mazda, Mitsubishi, Nissan, Porsche (924, 928), Saturn, Volkswagen , (4, 5, 6-cylinder) as well as for most other engines with available valve springs for valves...

Ensure precise timing with this Engine Timing Chain Tool Set for Vauxhall/Opel 1.0/1.4/1.5 petrol engines. Essential for locking camshafts during timing chain replacement.

Applications: Vauxhall/Opel: Adam (2014 – 2019); Astra-K (2015 – 2019); Corsa-E (2015 – 2019); Insignia-B (2017 – 2020); Mokka X (2016 – 2019); Viva (Karl) (2015 – 2020)

Equivalent to OEM tools EN-51367, EN-51298, EN-51632.

Made in China.

• Precision Timing
• Wide Application
• OEM Equivalent

A/C spring lock coupling tools, 50122
Features:
- for 3/8", 1/2", 5/8", 3/4" couplers;
- Designed for separating air conditioning refrigerant pressure lines on these vehicles;
- Used for Ford, Chrysler and Jeep vehicles

Made in: China

Camshaft pulley locking tool - Renault 1.4-1.6 16V, 1.8 16V, 2.0 16V, 50621

Designed to allow the correct alignment on the engine pulleys when replacing the cambelts on the 1.6 16v petrol engine.
For 1.6 16v engines.
OEM: 1490-01.
Applicalbe: Clio II / III, Clio sport, Kangoo, Laguna, Modus, Megane II, Scenic, Grand Scenic, Espace.
Nissan: Qashqai, Note

Code: 520028

Made in China

Engine Timing Tool Set BMW Mini, PSA 1.4 & 1.6, Citroen, Peugeot, 50390

Suitable for timing 1.4 & 1.6 Valvetronic direct injection petrol, chain drive engines, fitted in BMW Mini, Citroen and Peugeot vehicles.
Content:
Camshaft Locking Tool - Inlet
Camshaft Locking Tool - Exhaust
Camshaft Alignment Clamp
Crankshaft Setting Pin M6
Setscrews (4)
Chain tensioner

Models:
Mini One Coupe R56 (2006-2010)
Mini Cooper Coupe R56 (2006-2010)
Mini Cooper HB R55 (2007-2010)
Citroën C4 (2008-2009)
Citroën C4 Picasso (2008-2009)
Peugeot 207 (2006-2010)
Peugeot 207CC (2007-2010)
Peugeot 308 (2001-2010)
Peugeot 3008 (2009-2012)
Peugeot 5008 (2009-2012)

3 pcs 1/2" Dr. Rim Protective wheel socket set, 30002

Suitable for both manual and impact wrenches.
With plastic coating to protect aluminum rims.
Color coded.
Material: Cr-Mo
Overal length: 85 mm
Size: 17 mm, 19 mm, 21 mm

Diesel engine setting / locking set - 1.3D JTD (M) / TDCi / DDiS / CDTi 16v Chain Drive, 50310A

Suitable for synchronizing camshaft and crankshaft with chain drive 1.3. The set also has a locking pin for tensioning.
OEM Tools:       
Alfa Romeo/Fiat/Lancia: 1.871.00.900,
Ford:  303-1472,
Suzuki:  09912-38300, 09916-98610, 09917-68610,
Vauxhall/Opel: EN-46781, EN-46785, KM-955