Magma

3 Pcs 1/2" Dr. Damaged Wheel Nut Remover sockets, 50496

Deep sockets with special profile grips to allow loosening of damaged or rounded bolts or nuts on car wheels.
Material: Cr-Mo
Size: 17, 19, 21mm

Made in China

3 Jaw Internal & External Puller Set, 50153

Dimensions:
Internal bearing extractor: 15 mm - 30 mm
Inner bearing extractor: 30 mm - 80 mm
External bearing extractor: 15 mm - 80 mm.
Locking the nut to open the jaws and secure the bearing. Then use the reverse hammer to pull the bearing.

Made in China

2-Jaw Gear puller 80х100, 50141D

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 100 mm
Axis width: 80 mm

Made in China

2-Jaw Gear puller 120х100, 50141A

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 100 mm
Axis width: 120 mm

Made in China

2-Jaw Gear puller 150х150, 50141B

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 150 mm
Axis width: 150 mm

Made in China

2-Jaw Gear puller 200х150, 50141C

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 150 mm
Axis width: 200 mm

Made in China

5 pcs Inner bearing puller, 50140

The kit consists of a slide hammer (2 Lb-980 g) and a set of extractors of various sizes needed to pulling internal bearings.
Capacity: 3/8 "(10mm) - 1-1 / 4" (32mm)
Contents:
Slide hammer - 980 g
Bearing extractor: 3/8 "to 1/2" (10 mm-14 mm)
Bearing extractor: 9/16 "to 11/16" (15mm-19mm)
Bearing extractor: 5/8 "to 1" (18mm-25mm)
Bearing extractor: 1 "to 1-1 / 4" (25mm-32mm)
Come with a carry case.

Made in China

7 pcs air conditioning A/C fuel line disconnect tool set, 50129

Features: Easily disconnects air conditioning lines and quick connect fuel lines 
Specification:
- Simple assembly and disassembly of quick connectors for automotive air conditioning duct and fuel pipelines, easily disconnected;
- Practical, easy, and affordable;
Weight”116 g 
Sizes: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"

Made in China

Camshaft pulley locking tool - Renault 1.4-1.6 16V, 1.8 16V, 2.0 16V, 50621

Designed to allow the correct alignment on the engine pulleys when replacing the cambelts on the 1.6 16v petrol engine.
For 1.6 16v engines.
OEM: 1490-01.
Applicalbe: Clio II / III, Clio sport, Kangoo, Laguna, Modus, Megane II, Scenic, Grand Scenic, Espace.
Nissan: Qashqai, Note

Code: 520028

Made in China

Engine Timing Tool Set BMW Mini, PSA 1.4 & 1.6, Citroen, Peugeot, 50390

Suitable for timing 1.4 & 1.6 Valvetronic direct injection petrol, chain drive engines, fitted in BMW Mini, Citroen and Peugeot vehicles.
Content:
Camshaft Locking Tool - Inlet
Camshaft Locking Tool - Exhaust
Camshaft Alignment Clamp
Crankshaft Setting Pin M6
Setscrews (4)
Chain tensioner

Models:
Mini One Coupe R56 (2006-2010)
Mini Cooper Coupe R56 (2006-2010)
Mini Cooper HB R55 (2007-2010)
Citroën C4 (2008-2009)
Citroën C4 Picasso (2008-2009)
Peugeot 207 (2006-2010)
Peugeot 207CC (2007-2010)
Peugeot 308 (2001-2010)
Peugeot 3008 (2009-2012)
Peugeot 5008 (2009-2012)

Diesel engine setting / locking set - 1.3D JTD (M) / TDCi / DDiS / CDTi 16v Chain Drive, 50310A

Suitable for synchronizing camshaft and crankshaft with chain drive 1.3. The set also has a locking pin for tensioning.
OEM Tools:       
Alfa Romeo/Fiat/Lancia: 1.871.00.900,
Ford:  303-1472,
Suzuki:  09912-38300, 09916-98610, 09917-68610,
Vauxhall/Opel: EN-46781, EN-46785, KM-955

Engine Setting/locking Kit - BMW N47/N57 2.0, 3.0 - Chain Drive, 50344A

Essential tools for timing the BMW N47/N57 2.0 and 3.0 diesel chain drive engines.
Kit includes camshaft setting plate, flywheel locking pin and crankshaft turning tool.
Kit also includes HP pump sprocket retaining tool required during pump removal/replacement applications.

Applicable:
BMW:
116d E81/82/87/88 (08-12),
118d E81/82/87/88 (07-12),
120d E81/82/87/88 (07-12),
123d E81/82/87/88 (07-12),
316d E90/91/92/93 (09-12),
318d E90/91/92/93 (07-12),
320d E90/91/92/93 (07-12),
325d E90/91/92/93 (10-12),
330d/xd E90/91/92/93 (08-12),
520d E60/61 (07-10),
525d F10/11 (10-12),
530d F10/11 (10-12),
530dGT F07 (09-12),
535d F10/11 (10-12),
535dGT F07 (10-12),
730d/Ld F01/02/04 (08-12),
740d F01/02/04 (09-12),
740d xDrive F01/02/04 (09-12),
X1 sDrive 18d E84 (09-12),
X1 sDrive 20d E84 (09-12),
X1 xDrive 18d E84 (09-12),
X1 xDrive 20d E84 (09-12),
X1 xDrive 23d E84 (09-12),
X3 2.0d E83 (07-10),
X3 xDrive 18d E83 (08-10),
X3 xDrive 30d E83 (11-12),
X5 3.0d E70 (10-12),
X5 xDrive 40d E70 (10-12),
X6 xDrive 30d E71/72 (10-12),
X6 xDrive 40d E71/72 (10-12)

Engine Codes:
N47/N47S; D20A, D20B, D20U0, D20O0, D20T0, N57; D30U0, D30O0, D30O1, D30T0

OEM Tools: 11.5.320, 11.6.480, 11.8.740, 11.8.760

Made in China

Audi A4 A6 3.0L VAG 3.0 V6 Camshaft Alignment Locking Timing set, 50366А

Application: 3.0L V6 AVK Audi A4 3.0 V6 (2001-2008) and Audi A6 3.0 V6 (2001-2008), Audi A6, VW Polo Diesel, Audi A6 with Z15L TDi engines.
Engine code: ASN, BBJ
Not applicable for 5V engines.
OEM tools:
T40011 Cam Belt Tensioner Locking Pin
T40026 Crankshaft Locking Tool
T40030 2 pcs. Camshaft Locking Tools
T40028 Camshaft Sprocket adjustment tool
Content:
2 x C-fixtures tools for locking left and right camshafts
1 x TDC Locking Pin
1 x 3/8 "Drive Camshaft Adjuster Socket.
1 x Tensioner Locking pin.
1 x Tensioner wrench  with handle...

A/C spring lock coupling tools, 50122
Features:
- for 3/8", 1/2", 5/8", 3/4" couplers;
- Designed for separating air conditioning refrigerant pressure lines on these vehicles;
- Used for Ford, Chrysler and Jeep vehicles

Made in: China

Ensure your Audi's transmission is running smoothly with our Audi Transmission Dipstick 50931А. This essential tool allows you to quickly and accurately check your transmission fluid level, helping you maintain optimal performance and prevent costly repairs.

• Accurate measurement
• Durable construction
• Easy to use