Magma

Bearing separator 50 - 75 mm, 50132-2

Capacity:2" 1/4"- 3 1/2". (50mm x 75mm)
Bolt 12.7 x 135 mm, thread 1/2" x 20UNF
Body thread 3/8" x 16UNC
HRC 38-45°
Forged
Chrome plated

Bearing separator 30-50 mm, 50132-1

-  Capacity: 30mm x 50mm  (1-1/4" to 2-1/4")
-  Bolt 9.5 x 125 mm, thread 3/8" x 24UNF
-  Body thread 3/8" x 16UNC
-  HRC 42-45°
-  Forged
-  Chrome plated

Door upholstery tack remover, 50939

Designed to remove the car door panel.
Comfortable extended handle.
Made of heat treated carbon steel.
Screwdriver length: 200 mm

Made in China

5 pcs 1/2"Dr. Twist socket set

Socket size: 17 mm, 19 mm, 21 mm, 22 mm and 12 mm and drift punch.

THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!

Made in China

Water pump sprocket holder, 50864

Application:
For GM Ecotec; Holds the Timing Chain and Gear in Place While Removing or Installing Water Pump on Ecotec Engines.
Securely holds water pump sprocket preventing loss of timing or damage to the engine.
Special half-moon design allows easier access to water pump gear bolts.
Uses access cover bolts to hold the tool in place.

Made in China

BMW - 3 pcs Rim Lock socket set, 50440

1/2" Dr. special socket setfor BMW rim locks use
Sizes:
17 teeth х 14.5 mm
10 teeth х 16.0 mm
21 teeth х 16.5 mm

Made in China

17 pcs proffesional slide hammer/puller set, 50139A
Features:
Designed to use with other 5/8" - 18 thread slide hammer attachments.
Internal and External jaws provide a variety of combinations to pull bearings, gears and seals
Pulls flange-type rear axle and most front wheel drive hubs.
Set includes grip wrench adapter and dent puller
Two and three way cross blocks and cone provide perfect jaw configuration for many jobs
Drop forged steel puller and fully hardened shaft and accessories.
Converts in to 2 or 3 jaw internal / external puller.

1/2" Dr. Ratchet handle, G0001

72 teeth

Made of CR-V

Made in China

3 pcs Flexible Hose Clamps, 50201

Features:
-For sealing the heater hoses from 1/2 "to 3/4" in diameter.
-Used in the brake lines and fuel system piping.
-Radiator pipe clamp.
-Special arc design will not damage the internal hose material.
-Lightweight and non-conductive.
-Bright colors easy to find.

Auxiliary stretch belt removal installation tool, 50370

Designed for the recommended removal and installation of elasticated or stretch drive belts fitted to modern auxiliary drive systems such as the alternator or power steering.
■ Prevents damage to the pulley and prolongs the life of the belt.
■ Two tools included, one for installation and one for removal.
■ Fits most crankshaft pulleys.
■ Supplied in Blow-Molded Case.

2-Way Pneumatic ATF Auto Transmission Fluid with adapter set, 50035

Features: For fast, safe and clean extraction, delivery and distribution of fluids.
Provided with safety valve with preset 3 Bar (43Psi).
This will release the overpressure automatically. Equipped with a manometer for easier reading and control of the pressure in the tank, a valve for high flow control, two-way control valves and a spiral valve, facilitating easy change of extraction and dosing of the liquid.
Tank capacity: 10 l
Air Inlet: 1/4 "
Air consumption: 57 l / min. (2 cfm)
Fluid temperature range: -19 ° C - + 60 ° C (-3 ° F - + 140 ° F)
Oil distribution working pressure: less than 3 Bar (43 Psi)
Oil extraction working pressure: 2.76 - 11.72 Bar (40-170 Psi)
The set also includes 1m nylon hose, 2m PU hose with a touch controller gun for dispensing oil, universal flexible rubber nozzle, set of adapters for transporting ATF oil.

Made in China

CV Boot clamps pliers BR62526

Application: for AUDI, BMW, CHRYSLER, FORD, GM, HONDA, MAZDA, MERCEDES, NISSAN, OPEL/VAUXHALL, VW etc.

Made in Taiwan

Code: 501011