Magma

Adjistable fuel tank lid remover, 50909

Working with combination wrench 19 mm
Working Range 100 - 170 mm

Made in China

VW T5 Tuareg LT 2.5TDI -Water pump removal tool set, 50373

The water pump of the VW Transporter and the VW Touareg is driven by the gears that drive the engine.
The kit is used to remove the water pump and bring the engine to the top dead center (TDC position).
Application:
VW Transporter T5 (after 2004) 2.5 TDI (engine: AXE, AXD, BNZ)
VW Touareg (after 2003) 2.5 5-cylinder TDI engines (engine: BAC, BPE)
Engine Codes: AXD, AXE, BAC, BLJ, BLK, BNZ, BPC, BPD

OEM No. T10221; T10221A; T10222; T10222A; T10225; T10225A

Made in China

Damaged Glow Plug Removal Set

• For removing broken or damaged glow plugs.
• Removes 8mm and 10mm glow plugs.
• Manufactured from Selected steel.
• Ratchet Tap wrench (part number 6002)
• Packed in a blow case.

Petrol Engine Timing Kit - Citroen/Peugeot 1.8, 2.0 - Belt Drive

Essential tools for timing belt replacement on 1.8 and 2.0 petrol 'EW code' engines.
Features flywheel/drive plate, tensioner pulley adjuster and tensioner locking tool.
Many of the timing pins are also suitable for other petrol/diesel PSA engines.
Model No: VSE5936, OEM Tools: 0189S1, 0189S2, 0132AB / 0194A/0178D, 0194B, 0188M, 0189B, 0188AH, 0189R, 7017TR / 0153U, 0188J2, 0188J/J2, 0178E / 5711TE
Applications: Citroen; Xsara 2.0 16v, C5 1.8/2.0/HPi, Xsara Picasso 1.8/2.0 16v (02-05), Peugeot; 406 1.8 16v (00-04), 807 2.0 16v (02-05)
Engine Codes: 6FZ (EW7J4), FRN (EW10J4/L4/5), RLZ (EW10D)

17 pcs Diesel injector seat cutter set, 50682
This set is used to clean and decarbonise injector seats when changing injectors.
It helps to avoid blow-back due to poorly seated injectors.
Suitable for a wide range of vehicles of modern Common Rail Vehicles with injectors from Delphi and Bosh.

Contents:
14mm x 14mm Flat Reamer (for AUDI)
15mm x 19mm Flat Reamer
15.5mm x 15.5mm Flat Reamer
15.5mm x 15.5mm Angled Reamer
17mm x 17mm Angled Reamer
17mm x 17mm Flat Reamer
17mm x 17.5mm Flat Reamer
17mm x 19mm Flat Reamer
17mm x 19.5mm Flat Reamer
17mm x 20mm Flat Reamer
17mm x 21mm Angled Reamer
17.5mm x 20.5mm Angled Reamer
19mm x 21.5mm Flat Reamer
T-handle; Pilot Hex 19 x 170mm; 15.5 X 250mm Cutter; 2.5mm Hex Key

Made in China

7 pcs Diesel Injector Seat Cutter Set
Made from top quality material SKD11 which makes clean work easy
Comes with 5 various cutters which fit most diesel car and light commercials;
Contents:
- 15 x 19mm flat reamer -Universal applications;
- 17 x 17mm flat reamer - Delphi / Bosch injectors (BMW / PSA / Renault /Ford);
- 17 x 19mm flat reamer - Bosch injectors (Mercedes CRD);
- 17 x 17mm angled reamer - Mercedes-Benz CDI;
- 17 x 21mm angled reamer - Fiat / Iveco;
- 1 x pilot post.

Ensure your vehicle's optimal performance with our 4-in-1 Refractometer! This hand-held optical device accurately measures antifreeze, screenwash, battery fluid, and AdBlue urea concentration.

• Automatic Temperature Compensation (ATC) for increased accuracy.
• Easy to use and calibrate for quick measurements.
• Soft rubber eyepiece and non-slip grip for comfortable handling.

1/2"Dr. Oxygen sensor wrench 22 мм (7/8"HEX), 50359

Easy removing and installation of oxigen sensors. Suitable for work in hard-to-reach areas. Offset design for limited areas.

Works with a 1/2"Dr. ratchet handle.

Size: 22 mm, 6-pt

Application: FORD, TOYOTA, NISSAN, BENZ, BMW and most of the European cars.

Material: CR-MO

Made in China

VW/Audi 2.5 Tdi V6, Audi A8 3.3 Tdi V8 - Engine timing tools, 50316
Application:
Car models:
VW: Passat (98-05)
Audi:A4 (97-09), A6 (97-05), A8 (97-02), Alloard
Skoda; Superb (02-08)
Engines:
2.5 V6 TDI, 3.3 V8 TDI
Engine code:
AFB, AKE, AKN, AYM, BAU, BCZ, BDG, BDH, BFC
Contents:
2xCamshaft locking plates
1xCrankshaft Locking TDC screw

Applicable:
* VW/AUDI 2.5 TDI V6 & AUDI A8 3.3 TDI V8 engines
* AUDI V6 petrol & V6/V8 diesel engines

Made in China

Petrol Engine Timing Kit-OPEL& VAUXHALL 1.0,1.2,1.4, 50304

This set of kit includes all the locking tools to time the chain on 1.0, 1.2, 1.4 Ecotec Vauxhall / Opel twin cam(chain) engines.
The timing disc position gauge for positioning the timing sensor disc fitted to the inlet camshaft is also included.
Applicable:
Models: Corsa, Agola, Astra,Meriva (97-04)
Engines:1.0 12v., 1.0 16v, 1.4 16v(Chain).
Codes: X10xe, Zi0xe, Z10xep,X12xe, Z12xep, Z14xep.
This set of kit includes all the locking tools to time the chain on 1.0, 1.2, 1.4 Ecotec Vauxhall / Opel twin cam(chain) engines;
The timing disc position gauge for positioning the timing sensor disc fitted to the inlet camshaft is also included.

Petrol Engine Timing Kit-RENAULT 1.4,1.6,1.8,2.0 16V-Belt Drive
Suitable for timing belt replacement on petrol 1.4, 1.6, 1.8 and 2.0 engines fitted to Renault vehicles. Some 1.8 and 2.0 engines may require associated tool to loosen the camshaft sprocket bolts.
Suitable for timing belt replacement on petrol 1.4, 1.6, 1.8 and 2.0 engines fitted to Renault vehicles.
Some 1.8 and 2.0 engines may require associated tool to loosen the camshaft sprocket bolts.
Renault Clio II (99-06) 
Renault Clio III/Sport (05-12)
Renault Espace/Grand Espace (98-02)
Renault Espace/Grand Espace IV (02-10)
Renault Kangoo/Trekka (01-09)
Renault Laguna (98-01)
Renault Laguna II (01-07)
Renault Laguna III (07-10)
Renault Megane (99-03)
Renault Megane II (02-10)
Renault Megane III/Sport (08-12)
Renault Megane/Scenic (99-00)
Renault Scenic/RX4 (99-03)
Renault Scenic/Grand Scenic II (03-09)
Renault Trafic II (01-11)
Nissan Kubistar X76 (03-09)
Nissan Primaster X83 (02-11)
Vauxhall/Opel Vivaro (01-11) 
Applications:
Renault : Avantime (00-03), Clio II (99-06), Clio III/Sport (06-09), Espace/Grand Espace (98-02), Espace/Grand Espace IV (02-10), Kangoo/Trekka (01-09), Laguna (98-01), Laguna II (01-07), Laguna III (07-13), Megane (99-03), Megane II (02-10), Megane III/Sport (08-13), Megane/Scenic (99-00), Scenic/RX4 (99-03), Scenic/Grand Scenic II (03-09), Trafic II (01-11), Twingo II (08-14), Vel Satis (00-10), Wind (10-14).
Nissan : Kubistar X76 (03-09), Primastar (02-11).
Vauxhall/Opel : Vivaro (01-11).

Engine Code:
K4J 1.4 16v - Renault 730, 732, 740
K4M 1.6 16v - Renault 708, 730, 732, 750, 752, 753, 760, 761, 764, 812, 813, 848
K4M 1.6 16v - Nissan 752, 753
F4P 1.8 16v - Renault 720, 722, 760, 770, 771, 772,773, 774, 775
F4R(t) 2.0 16v - Renault 700, 701, 712, 713, 714, 715, 720, 722, 730, 732, 740, 741, 744, 746, 764, 765, 770, 771, 774, 776, 780, 784, 786, 787, 790, 791, 792, 794, 795, 796, 797, 800, 810, 811, 820, 830, 870, 874
F4R(t) 2.0 16v - Nissan 720, 722, 820
F4R(t) 2.0 16v - Vauxhall/Opel 720, 722, 820

Made in China.

Engine timing tool set for RENAULT SCENIC LAGUNA CLIO 1.4/1.6 16V, 50094

Features: For the orrect synchronization of the Renault K4J, K4M and F4P, F4R when changing the belt.
Application: Clio, Laguna, Megane 1.4 / 1.6 16v
  The set includes:
- 8 mm TDC timing pin- OEM No .: MOT 1054, MOT 861, MOT 863
- Crankshaft Locking Pin - OEM No .: MOT 1489
- Camshaft setting tool - OEM No .: MOT 1496
- Camshaft pulley alignment tool - OEM No .: MOT 1490
Applications:
Clio 1.4, 1.6 16V (98-06).
Megane 1.4, 1.6 16V (98-06).
Clio Sport 2.0 16V (98-06).
Megane 1.8, 2.0 16V (98-04).
Espace 2.0 16V (98-04).
Megane II 1.4 16V (02-09).
Grand Scenic II 1.4/1.6 16V (02-09).
Megane II 1.6 16V (02-05).
Laguna 1.6 16V (98-06).
Megane II 2.0 16V (02-09).
Laguna 1.8 16V (01-05).
Scenic 1.4, 1.6 16V (98-06).
Laguna 1.8, 2.0 16V (98-04).
Scenic 1.8, 2.0 16V (98-04).
Laguna II 2.0 16V T (02-09).
Scenic II 1.4, 1.6, 2.0 16V (02-09).

3 Jaws Gear puller 3”, 50742C

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 6”
Capacity: 60 – 152 mm

Made in: China

Fiat Alfa Romeo Lancia 1.2; 1.4 16V - Engine Timing Tool Set, 50523

Features: For adjusting the engine timing during timing belt replacement, cylinder head repair, replacement of the cylinder head gasket, etc.

Suitable for Alfa Romeo, Fiat and Lancia 1.2 16V / 1.4 16v / 1.4 T-Jet

Engine codes:

169A3000, 179B9000, 182B2000, 188A5000, 192B2000, 198A1000, 198A4000, 199A6000, 199A8000, 843A1000

Contents:

OEM 2.000.004.500 - Crankshaft locking tool (with screws M6x30 and 3 pcs. M8x16)

OEM 1.860.985.000 - Camshaft adjusting tool (1 pair)

OEM 1.860.992.000 - Adjusting tool for piston height

OEM 1.860.987.000 - Adjusting tool for timing belt tensioner

OEM 2.000.015.800 - Locking tool for camshaft sprockets (with screw M8x30)

Made in China

3 Jaws Gear puller 4”, 50742B

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 4”
Capacity: 50 – 102 mm