Magma

3 Jaws Gear puller 3”, 50742A

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 3”
Capacity: 40 – 76 mm

Engine timing tool kit for Renault, 50089

This new camshaft pulley setting tool holds two pulleys in place while changing the cam belt and correct engine timing to be performed when changing the timing belt.
Installing and removal of camshaft / variable camshaft timing unit.
Checking and adjustment of timing.
Petrol engine:
Twin camshaft engine: 1.2, 1.4, 1.6, 1.8, 2.0 16V, 2.5 20V.
Diesel engine: 1.9D/TD/dTi, 2.2D/TD, 2.5D, 2.8dTi, 1.5dCi, 1.9dCi, 2.2dCi, 2.5dCi
Applicable:
Renault 16V & K4J, K4M & F4P, F4R / 1.4 16V K4J / 1.6 16V K4M / 1.8 16V F4P & F4R(Langunall).
Suitable for:
1.2 (Engine code D7F) e.g. Clio and Twingo
1.2 / 1.4 / 1.6 (Engine code E5-E7F, E7J, K7M) e.g. Clio, Megane, Scenic, Kangoo
1.4 / 1.6 16V (Engine code K4J, K4M ab 1998) e.g. Clio, Clio Sport, Megane, Scenic, Laguna, Espace
1.7 / 1.8 / 2.0 (Engine code F1N - F3N, F3P, F2R - F3R) e.g. Clio, Megane, Scenic
1.8 / 2.0 16V (Engine code F4P, F4R ab 1998) e.g. Clio, Clio Sport, Megane, Scenic, Laguna, Espace
1.8 / 2.0 16V (Engine code F7P, F7R) e.g. Clio Williams, Megane, Spider, R19
2.0 / 2.2 (Engine code J5R - J7R, J5T) e.g. Safrane, Espace, Master, Traffic
2.0 16V / 2.5 20V (Engine code N7Q, N7U) e.g. Laguna and Safrane
And identical Volvo engines (Engine code B16, B18, B20) e.g. Volvo 440, 460, 480

Suitable for the following diesel engines:
1.9/2.5/2.8 Engine code F8M, F8Q, G8T, J8S, F9Q, S8U, S9U, S9W e.g. Clio, Laguna, Megane, Kangoo, Espace, Master, Traffic
Identical diesel engines e.g. Opel Arena, Movano and Volvo S40, V40 etc.

Made in China

Reanult 2.2/2.5 dCi - Engine timing tool set 50345

Features:
For adjusting the camshaft of Renault Esapce2.2 DCI, Master 2.2 / 2.5DCI

The set contents:
Exhaust camshaft locking tool 1.5, 1.9, 2.2, 2.5 DCI/DTI
Exhaust camshaft locking tool 1.5, 1.9, 2.2, 2.5 DCI/DTI
Crankshaft locking tool 2.2, 2.5 DCI/DTI
Camshaft locking tool 2.2 16V
Pulley locking tool
High pressure pump camshaft locking tool

Models:
Opel: Astra, Signum, Speedster, Vestra, Zafira, Movano, Vivaro
Nissan: Micra, Almera, Note, Qashqai, Primera, Kubistar, Primastar, Interstar
Renault: Clio, Modus, Twingo, Megane, Megane, Scenic, Laguna, Avantime, Espace, Kangoo, Trafic, Master
Dacia: Logan

Engine code: G9U, G9T, F9Q, Z22SE, Z22YH

Made in China
 

Bearing separator 105 - 150 mm, 50132-4

Capacity: 105 - 150 mm
Bolt size: Ø 19 mm, 260 mm
Bolt thread: 3/4" x 16 UNF
Body thread: 5/8" x 11 UNC
Drop forged
Chrome finish

Bearing separator 75 – 105 mm, 50132-3

Bearing separator 50 - 75 mm, 50132-2

Capacity:2" 1/4"- 3 1/2". (50mm x 75mm)
Bolt 12.7 x 135 mm, thread 1/2" x 20UNF
Body thread 3/8" x 16UNC
HRC 38-45°
Forged
Chrome plated

Bearing separator 30-50 mm, 50132-1

-  Capacity: 30mm x 50mm  (1-1/4" to 2-1/4")
-  Bolt 9.5 x 125 mm, thread 3/8" x 24UNF
-  Body thread 3/8" x 16UNC
-  HRC 42-45°
-  Forged
-  Chrome plated

Door upholstery tack remover, 50939

Designed to remove the car door panel.
Comfortable extended handle.
Made of heat treated carbon steel.
Screwdriver length: 200 mm

Made in China

5 pcs 1/2"Dr. Twist socket set

Socket size: 17 mm, 19 mm, 21 mm, 22 mm and 12 mm and drift punch.

THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!

Made in China

Water pump sprocket holder, 50864

Application:
For GM Ecotec; Holds the Timing Chain and Gear in Place While Removing or Installing Water Pump on Ecotec Engines.
Securely holds water pump sprocket preventing loss of timing or damage to the engine.
Special half-moon design allows easier access to water pump gear bolts.
Uses access cover bolts to hold the tool in place.

Made in China

BMW - 3 pcs Rim Lock socket set, 50440

1/2" Dr. special socket setfor BMW rim locks use
Sizes:
17 teeth х 14.5 mm
10 teeth х 16.0 mm
21 teeth х 16.5 mm

Made in China

17 pcs proffesional slide hammer/puller set, 50139A
Features:
Designed to use with other 5/8" - 18 thread slide hammer attachments.
Internal and External jaws provide a variety of combinations to pull bearings, gears and seals
Pulls flange-type rear axle and most front wheel drive hubs.
Set includes grip wrench adapter and dent puller
Two and three way cross blocks and cone provide perfect jaw configuration for many jobs
Drop forged steel puller and fully hardened shaft and accessories.
Converts in to 2 or 3 jaw internal / external puller.

Auxiliary stretch belt removal installation tool, 50370

Designed for the recommended removal and installation of elasticated or stretch drive belts fitted to modern auxiliary drive systems such as the alternator or power steering.
■ Prevents damage to the pulley and prolongs the life of the belt.
■ Two tools included, one for installation and one for removal.
■ Fits most crankshaft pulleys.
■ Supplied in Blow-Molded Case.

1/2" Dr. Ratchet handle, G0001

72 teeth

Made of CR-V

Made in China

2-Way Pneumatic ATF Auto Transmission Fluid with adapter set, 50035

Features: For fast, safe and clean extraction, delivery and distribution of fluids.
Provided with safety valve with preset 3 Bar (43Psi).
This will release the overpressure automatically. Equipped with a manometer for easier reading and control of the pressure in the tank, a valve for high flow control, two-way control valves and a spiral valve, facilitating easy change of extraction and dosing of the liquid.
Tank capacity: 10 l
Air Inlet: 1/4 "
Air consumption: 57 l / min. (2 cfm)
Fluid temperature range: -19 ° C - + 60 ° C (-3 ° F - + 140 ° F)
Oil distribution working pressure: less than 3 Bar (43 Psi)
Oil extraction working pressure: 2.76 - 11.72 Bar (40-170 Psi)
The set also includes 1m nylon hose, 2m PU hose with a touch controller gun for dispensing oil, universal flexible rubber nozzle, set of adapters for transporting ATF oil.

Made in China