Magma

3 Jaws Gear puller 3”, 50742C

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 6”
Capacity: 60 – 152 mm

Made in: China

3 Jaws Gear puller 4”, 50742B

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 4”
Capacity: 50 – 102 mm

3 Jaws Gear puller 3”, 50742A

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 3”
Capacity: 40 – 76 mm

Bearing separator 105 - 150 mm, 50132-4

Capacity: 105 - 150 mm
Bolt size: Ø 19 mm, 260 mm
Bolt thread: 3/4" x 16 UNF
Body thread: 5/8" x 11 UNC
Drop forged
Chrome finish

Bearing separator 75 – 105 mm, 50132-3

Bearing separator 50 - 75 mm, 50132-2

Capacity:2" 1/4"- 3 1/2". (50mm x 75mm)
Bolt 12.7 x 135 mm, thread 1/2" x 20UNF
Body thread 3/8" x 16UNC
HRC 38-45°
Forged
Chrome plated

Bearing separator 30-50 mm, 50132-1

-  Capacity: 30mm x 50mm  (1-1/4" to 2-1/4")
-  Bolt 9.5 x 125 mm, thread 3/8" x 24UNF
-  Body thread 3/8" x 16UNC
-  HRC 42-45°
-  Forged
-  Chrome plated

10mm 1/2" Dr. Square Male Drive Oil Drain Sump Plug Key Socket , 51491

Professional-grade 10mm male square drive oil drain plug socket wrench, engineered with a 1/2" drive interface to remove sump plugs from engines, gearboxes, and differentials.

Made in China

8mm 1/2" Dr. Square Male Drive Oil Drain Sump Plug Key Socket, 51490

Professional-grade 8mm male square drive oil drain plug socket wrench, engineered with a 1/2" drive interface to remove sump plugs from engines, gearboxes, and rear axles.

Made in China

Auxiliary stretch belt removal installation tool, 50370

Designed for the recommended removal and installation of elasticated or stretch drive belts fitted to modern auxiliary drive systems such as the alternator or power steering.
■ Prevents damage to the pulley and prolongs the life of the belt.
■ Two tools included, one for installation and one for removal.
■ Fits most crankshaft pulleys.
■ Supplied in Blow-Molded Case.

5 pcs 1/2"Dr. Twist socket set

Socket size: 17 mm, 19 mm, 21 mm, 22 mm and 12 mm and drift punch.

THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!

Made in China

2-Way Pneumatic ATF Auto Transmission Fluid with adapter set, 50035

Features: For fast, safe and clean extraction, delivery and distribution of fluids.
Provided with safety valve with preset 3 Bar (43Psi).
This will release the overpressure automatically. Equipped with a manometer for easier reading and control of the pressure in the tank, a valve for high flow control, two-way control valves and a spiral valve, facilitating easy change of extraction and dosing of the liquid.
Tank capacity: 10 l
Air Inlet: 1/4 "
Air consumption: 57 l / min. (2 cfm)
Fluid temperature range: -19 ° C - + 60 ° C (-3 ° F - + 140 ° F)
Oil distribution working pressure: less than 3 Bar (43 Psi)
Oil extraction working pressure: 2.76 - 11.72 Bar (40-170 Psi)
The set also includes 1m nylon hose, 2m PU hose with a touch controller gun for dispensing oil, universal flexible rubber nozzle, set of adapters for transporting ATF oil.

Made in China

Water pump sprocket holder, 50864

Application:
For GM Ecotec; Holds the Timing Chain and Gear in Place While Removing or Installing Water Pump on Ecotec Engines.
Securely holds water pump sprocket preventing loss of timing or damage to the engine.
Special half-moon design allows easier access to water pump gear bolts.
Uses access cover bolts to hold the tool in place.

Made in China

BMW - 3 pcs Rim Lock socket set, 50440

1/2" Dr. special socket setfor BMW rim locks use
Sizes:
17 teeth х 14.5 mm
10 teeth х 16.0 mm
21 teeth х 16.5 mm

Made in China

17 pcs proffesional slide hammer/puller set, 50139A
Features:
Designed to use with other 5/8" - 18 thread slide hammer attachments.
Internal and External jaws provide a variety of combinations to pull bearings, gears and seals
Pulls flange-type rear axle and most front wheel drive hubs.
Set includes grip wrench adapter and dent puller
Two and three way cross blocks and cone provide perfect jaw configuration for many jobs
Drop forged steel puller and fully hardened shaft and accessories.
Converts in to 2 or 3 jaw internal / external puller.