Magma

4Pcs 1/2" Drive Extra Long Spline Bit Socket Set, 50467

Fearutes: Extra long spline bit sockets for loosening and tightening drive shaft screws from the outside.
Applicable: for VW, Audi, Seat, Skoda, including VW Transporter T4 and Touareg.
Material:
Hardened and tempered Chrome Vanadium steel sockets.
S2 steel spline bits.
Sizes:
1 pc M8 x 800mm
1 pc M10 x 800mm
1 pc M12 x 800mm
1 pc M14 x 800mm

Made in China

20l Plastic Fuel Can, 75091

Ideal for the storage of petrol and diesel.
Manufactured from high-density polyethylene (HDPE).
Complete with a flexible pouring spout.
Capacity: 20 L
Size: 420 (L) x 180 (W) x 380 (H) mm
Weight: 0.980 kg

Made in China

Pull Camp Car Body Alignment Tool (2-way), 51160

Bolt size M14×120mm
Claw width: 35mm
Overal length: 230mm.
One way pulling max 3 t
Side way pulling max. 1 t
Weight: 2 kgs

Made in China

BPW Rear Hub Cap Socket 111mm, 51017

Features: Oval shape socket with two flats on the side to suit BPW rear axle hub retaining cap nuts found on later model Japanese commercial trucks, tractors and automotive equipment.
Applications: BPW 12 tons.
Use with 41mm spanner or socket.
Size: 111mm (Oval) across the flats.

Made in China

T30H Extra Long Screwdriver 300mm, 50779E

Magnetic tip screwdriver
With Slip-Not ergonomic soft grip handle.
For use on both Tamper Proof and standard Torx screws.
The long length is ideal for hard to reach screws.
Material: S2 steel.
Blade length: 300mm
Overal length: 400mm
Blade Tip: T30H.

7 Piece Pressure Loss Testing Kit, 50503

For checking pressure tightness of single cylinders on Diesel and gasoline engines.
Includes:
Dial indicator
M12 x 1.25 mm adaptor for motorbikes
M10 x 1.00 mm adaptor for motorbikes
M24 x 2 mm adaptor for diesel engines
M12 x 1.25 mm adaptor with 7 mm hole for VW diesel engine
Adaptor for multi valve engines
Adaptor for M14 x 1.25 and M18 x 1.5 mm
Working pressure: 6 - 12 bar
Maximum pressure 6.8 bar / 100 PSI.
Note: Before connecting to compressed air system the adjusting valve must be closed.Connect the device to the compressed air system and open the adjusting valve slowly until the pointer reaches the 0-mark.

Made in China

12” (305 mm) Magnetic tool holder, 50246-12

Convenient organizer for various tools as screwdriver, ratchet, hammer etc.
Screw and fasten on the wall.
Length: 305 mm (12 ”)

Made in China

11 pcs Bearing and seal driver set, 50130
For the installation of bearings and seals. Helps avoid damage to bearing and seal faces.
This set will provide the correct size driver for 99%, bearings, bush and oil seal installations.
The reverse side of the collar can also be used to drive seals.
Supplied with a strong blow mould case.
Ideal for car, commercial motorbike or any application that has bearings or seals.
Always drive that bearing in square and flush first time.

The 3/8"Dr. 22mm Oxygen Sensor Socket 50323C is an essential tool for removing and installing oxygen sensors.

• Drive: 3/8" for compatibility with standard ratchets and extensions.
• Size: 22mm, 6-point (hex) design ensures a secure grip on the sensor.
• Durable Construction: Made from high-quality Chrome Vanadium steel for strength and longevity.
• Slotted Design: Features a 20mm wide slot to accommodate sensor wiring during removal and installation, preventing damage.

Made in China

5 L Metal Fuel Can, 75086

Ideal for the storage of petrol and diesel.
Made from thick 0.8mm steel
Capacity: 5 L
Size: 230 (L) x 115 (W) x 310 (H) mm
Weight: 1.30 kg

Made in China

One way Heavy Duty Pull Clamp, 51159

Bolt size: M20x120 mm
Claw width: 45 mm
Overal lenght: 230 mm
One way pulling max 5 t
Weight: 3 kgs

Made in China

Scania Rear Axle Nut Socket 100mm, 51016

Features:
Used to remove and install the rear axle nut on Scania trucks.
Size: 3/4" Drive x 100mm (8-point)

Made in China

4" (102 mm) Replacement stone, 50724

Size: 4" (102 mm)

3 pcs set, for Standard engine cylinder hone 50724

Made in China

T27H Extra Long Screwdriver 300mm, 50779D

Magnetic tip screwdriver
With Slip-Not ergonomic soft grip handle.
For use on both Tamper Proof and standard Torx screws.
The long length is ideal for hard to reach screws.
Material: S2 steel.
Blade length: 300mm
Overal length: 400mm
Blade Tip: T27H.

10 Pcs Tap Socket Set (Magnetic), 50567

Used with 3/8" Dr. and 1/4" Dr. ratchet handle.
For restricted access where a T-handle tap holder will not reach.
Strong magnet for holding the tap firmly in place.
Suitable for taps from M1.5 to M12.
Set contains:
6x 1/4" Dr. magnetic sockets, length 32mm: #1 (2.8mm), #2 (3.4mm), #3 (4mm), #3.5 (4.5mm), #4 (4.6mm), #4.5 (5.4mm).
4x 3/8"Dr. magnetic sockets, length 40mm: #5 (6.4mm), #6 (7.3mm), #7 (7mm), #8 (8.4mm)

Made in China