LÖTA

Antifreeze tester (For Ethylene glycol), 01A84906A

Easy to read indicator and designed for the popular modern Ethylene Glycol antifreeze. Suitable for use on OAT (Organic acid technology) antifreeze
Antifreeze Tester test at hot & cold temperatures.
Six floating discs for accurate reading. Number of floating discs indicates coolant strength.
Indicator range:  -7°C to -37°C ( +25°F to -34°F.)
Pure antifreeze will freeze at -12°C /10.4°F.
It permits to determine, with good approximation, the freezing point of the anti-freeze/coolant in the radiator and to reset the required protection level.
Floating orange disc shows over protection and loss of efficiency.

Made in Taiwan

11” Long bent 45° nose pliers, 654-1310

For gripping, adjustment and assembly work in hard to reach areas thanks to slim, very long design
Deep parts can be easily reached using the slim, half-round tips
Careful yet reliable gripping, holding and guiding.
Particularly suitable for work in the automotive trade and in mechanical engineering
Slim yet robust tool
Forged from special tool steel, oil-hardened and tempered
Head polished
Handles plastic coated
This model has a 45 degree angle bent nose
Made in Taiwan

AdBlue/DEF Tester (Diesel exhaust fluid), 01A84906

For the diesel engine emission system to function properly, the strength of the DEF solution must be maintained at 32.5% urea. Over time, the strength of the solution may change by evaporation, resulting in a reduction in the aqueous component of the solution or contamination. Both of these can lead to changes in the quality and strength of the DEF, which will be marked by the engine diagnostic system (DEF warning light).
Application:
For all vehicles equipped with diesel engines using urea solution at 32.5% as diesel exhaust (AdBlue®).
Gives a clear pass/fail result .
Accurate result regardless of sample temperature
Easy to use and read.
Attention! Always wash the inside of the appliance with distilled water after use.

Made in Taiwan

3/8” Dr. Adjustable torque wrench 5 – 25 Nm, 418-T-60-38

The ratchet-type torque wrench enables to accurately limit the applied torque of fixture tightening.
It is made of chrome-vanadium steel which guarantees its durability and durability.
It has a mechanical tension of a wrench that, after reaching the required tightening force, jumps over a tooth giving distinctive sound.
The scale of the moments is located in the handle of the key and is adjusted by turning.
Once you have set the desired torque, lock the key at the end of the handle.
Square drive: 3/8" Dr.
Capacity: 5 – 25 Nm (0.5 – 2.5 Kgs)
Made in Taiwan

3/8" 20-110 Nm Torque Wrench 418-T-80

The ratchet-type torque wrench enables to accurately limit the applied torque of fixture tightening.
It is made of chrome-vanadium steel which guarantees its durability and durability.
It has a mechanical tension of a wrench that, after reaching the required tightening force, jumps over a tooth giving distinctive sound.
The scale of the moments is located in the handle of the key and is adjusted by turning.
Once you have set the desired torque, lock the key at the end of the handle.
Square drive: 3/8" Dr.
Capacity: 20-110 Nm (2 – 11 Kgs)

Made in Taiwan

AUDI Q7, S4 1/2" Dr.7 Teeth Brake Caliper Socket 1/2"D 14mm 2006-0014

1/2" dr.7 teeth, 14mm socket QKX3 x 50mmL

Material: CR-MO
For removal and replacement of the retaining
screws on brake caliper on Q7 and other models

Made in Taiwan

3/4" Dr. Metal socket holder, 659-643210А

L: 432 mm - 10 Pcs

Material: Steel

Torque Wrench 1/2" 42-210 Nm 418-T-150

The ratchet-type torque wrench enables to accurately limit the applied torque of fixture tightening.
It is made of chrome-vanadium steel which guarantees its durability and durability.
It has a mechanical tension of a wrench that, after reaching the required tightening force, jumps over a tooth giving distinctive sound.
The scale of the moments is located in the handle of the key and is adjusted by turning.
Once you have set the desired torque, lock the key at the end of the handle.
Square drive: 1/2" Dr.
Capacity: 42-210 Nm (4.2– 21 Kgs)

Made in Taiwan

3/8" Dr. Metal socket holder, 659-343216

Torque Wrench 1/2" 70-350 Nm 418-T-250

The ratchet-type torque wrench enables to accurately limit the applied torque of fixture tightening.
It is made of chrome-vanadium steel which guarantees its durability and durability.
It has a mechanical tension of a wrench that, after reaching the required tightening force, jumps over a tooth giving distinctive sound.
The scale of the moments is located in the handle of the key and is adjusted by turning.
Once you have set the desired torque, lock the key at the end of the handle.
Square drive: 1/2" Dr.
Capacity: 70-350 Nm

Made in Taiwan

Torque Wrench 3/4" 65-450 Nm 418-T-300

The ratchet-type torque wrench enables to accurately limit the applied torque of fixture tightening.
It is made of chrome-vanadium steel which guarantees its durability and durability.
It has a mechanical tension of a wrench that, after reaching the required tightening force, jumps over a tooth giving distinctive sound.
The scale of the moments is located in the handle of the key and is adjusted by turning.
Once you have set the desired torque, lock the key at the end of the handle.
Square drive: 3/4" Dr.
Capacity: 65-450 Nm

N.W.: 3.770 kgs
G.W.: 4.580 kgs

Code: 505199

Made in Taiwan

1/4" Dr. Metal socket holder, 659-243216

L: 432 mm - 16 Pcs

Material: Steel

Torque Wrench 3/4" DR. 140-700 Nm 418-T-500

The ratchet-type torque wrench enables to accurately limit the applied torque of fixture tightening.
It is made of chrome-vanadium steel which guarantees its durability and durability.
It has a mechanical tension of a wrench that, after reaching the required tightening force, jumps over a tooth giving distinctive sound.
The scale of the moments is located in the handle of the key and is adjusted by turning.
Once you have set the desired torque, lock the key at the end of the handle.
Square drive: 3/4" Dr.
Capacity: 140-700 Nm

N.W.: 6.030 kgs
G.W.: 7.650 kgs

Code: 505200

Made in Taiwan

Exhaust removal pliers, 11143226

Features:
Easy separates the rubber supports from exhaust hanger brackets.
Works on all import and domestic car and truck exhaust systems that use the rubber hanger supports.
The operator simply squeezes the pliers handles to force the rubber support from the exhaust hanger to make a difficult job much easier.

Made in Taiwan

Torque Wrench 3/4" DR. 140-980 Nm 418-T-700

The ratchet-type torque wrench enables to accurately limit the applied torque of fixture tightening.
It is made of chrome-vanadium steel which guarantees its durability and durability.
It has a mechanical tension of a wrench that, after reaching the required tightening force, jumps over a tooth giving distinctive sound.
The scale of the moments is located in the handle of the key and is adjusted by turning.
Once you have set the desired torque, lock the key at the end of the handle.
Square drive: 3/4" Dr.
Capacity: 140-980 Nm

N.W.: 6.620 kgs
G.W.: 8.240 kgs

Code: 505201

Made in Taiwan