GARAGE TOOLS AND EQUIPMENT

Tilting post tyre changer, C-185.26

Optimum tool head for long life use.
Rigid self-centering chuck with precise inching sliding and finger protection slider.
Working table with carving ruler.
Accurate pneumatic locks to horizontal arm and tool head.
Firmed and flexible pneumatic control to post positioning.
Alloy gearbox with accurate conformity force transfer.
Bead breaker cylinder made of aluminum to resist rust.
Pedals assembly for fast service design.
Motor with copper-wire winding rotator and aluminum radiation housing.
Rim protection kits incl.
Low profle/large size wheel as optional series
Techncial Data:
Power: 1.1 kw
Voltage: 220 V
Max Wheel Diameter: 1000 mm
Max Tire Width: 355 mm
Clamp rim size outside: 12"-24"
Clamp rim size inside: 14"-26"
Pressure bead breaker (10 Bar): 2700 kgs
Max Shaft torquue: 1200 Nm
Working Pressure: 8-10 bar
Max Inflation Pressure: 3.5 Bar (50 Psi)
Level of noise: ≤ 75 dB
N.W.: 203 kgs
G.W.: 287 kgs

Elevate your auto shop with our robust 4-ton 1-Phase Electro-Hydraulic 2-Post Lift. Designed with a clear floor, it offers unobstructed access for mechanics.

• Dual-point lock release.
• Manual lowering for controlled descent.
• Automatic arm locking for enhanced safety.

2 ton High Jack stand HJS075

Capacity: 2 Ton
Min. Height: 1240 mm
Max. Height: 2130 ммmm
N.W.: 17,500 kgs

Made in China

5l Plastic Fuel Can, 75089

Ideal for the storage of petrol and diesel.
Manufactured from high-density polyethylene (HDPE).
Complete with a flexible pouring spout.
Capacity: 5 L
Size: 240 (L) x 140 (W) x 240 (H) mm
Weight: 0.320 kg

Made in China

Lifting pad for Car lift

Max. Height: 53 mm

Flange diameter: 50 mm

Made in China

Code: 50267

4 ton Solid Negel Jack Electro-hydraulic 2-post lift, floor plate + anchors + 4*85 mm Adapters

Driving Mode:
●Dual hydraulic cylinders, chain drive
Engagement Release Mode:
 ●Dual point manual lock release
Arm Assembly:
●Two-stage telescoping lifting long arms
●Three-stage telescoping lifting short arms
  Two-stage front and two-stage rear telescopic lifting arms giving the advantage of servicing cars with a small wheelbase. With this, the scope of the hoist obtains convenient functionality for all gauges of passenger cars, vans, mini vans and small trucks.
● Threaded lifting pads


Safety Mechanism:
●Automatic arm lock restraints
●Mechanical safety latch with 5cm interval in each post
●Parachute valve under each cylinder in case of hydraulic hose fracture
●Relief valve to prevent overloading
●Door opening protection rubber
●Up-limit switch
●Synchronization cable
Control System:
●Lifting operation by pressing the “UP” button on motor
●Manual lowering operation by pressing the lever on power pump

Technical Data:

Capacity - 4000 kg
Min. Height - 100 mm
Max. Lifting Height - 2000 mm
Overall Height - 2824 mm
Overal Width - 3499 mm
Width between columns - 2880 mm
Short Arm Lenght - 680 - 1230 mm
Long Arm Lenght - 880 - 1440 мм
Lifting Time - 60s
Lowering Time - 40s
Motor - 220V, 50Hz, 1Ph

Car lift color: Grey

Lifting arm color: Gray

Press pin adapter set

A set of eight steel mandrels and adaptor
Allowing the press to be used for a wider range of applications involving different sized workpieces.
Size adapters:
10х50 mm - Overal lenght: 80 mm
12х60 mm - Overal lenght: 90  mm
16х60 mm - Overal lenght: 90 mm
18х85 mm - Overal lenght: 115 mm
20х85 mm - Overal lenght: 115 mm
22х85 mm - Overal lenght: 115 mm
24х110 mm - Overal lenght: 140 mm
30х110 mm - Overal lenght: 144 mm

Creeper seat 55052

0.75 ton High Jack Stand HJS075

Capacity: 0.75 Ton
Min. Height: 1360 mm
Max. Height: 2030 ммmm
N.W.: 14,300 kgs

Made in China

10l Plastic Fuel Can, 75090

Ideal for the storage of petrol and diesel.
Manufactured from high-density polyethylene (HDPE).
Complete with a flexible pouring spout.
Capacity: 10 L
Size: 320 (L) x 155 (W) x 305 (H) mm
Weight: 0.650 kg

Made in China

Spring for Car lift carriage

Spring diameter: Ø 13.5 mm

Made in China

Triple Bag Air Jack 3 Ton, 55066

Capacity: 3000 kgs
Min. Height: 135 mm
Max. Height: 400 mm
Bag diameter: 210 mm
3 bags
Working pressure: 8  Bar
Safety valve
Air Inlet :1/4
Time up/down: 3-5 sec
Temperaturw range: -60 +50°C
N.W.: 20 kgs

Made in China

340 kgs Engine stand ESD750

Capacity: 340 kgs (750lbs)
Working Height: 780 mm
Color: Blue
N.W.: 17,500 kgs

Made in China

20l Plastic Fuel Can, 75091

Ideal for the storage of petrol and diesel.
Manufactured from high-density polyethylene (HDPE).
Complete with a flexible pouring spout.
Capacity: 20 L
Size: 420 (L) x 180 (W) x 380 (H) mm
Weight: 0.980 kg

Made in China

Ø30X25x2.65 mm O-ring for car lift

Made in China