INSTRUMENTS

18 Pcs 1/4″ Drive Impact Twist Spiral Extractor Socket Set for Damaged Bolts & Nuts – MG51489

A professional 18-piece master extractor set designed to effortlessly remove rusted, heavily damaged, or rounded-off nuts, bolts, and studs.
Featuring a reverse spiral internal groove layout, these sockets tightly bite into damaged fasteners for maximum slip-free extraction.

Made in China

Fiat Firefly 1.0 / 1.3 - Professional Engine Timing Tool Set - MG51487

A professional-grade specialized engine timing locking kit designed to firmly secure the camshafts and crankshaft in their correct position.
Masterfully engineered for the new generation Fiat Firefly 1.0L (3-cylinder) and 1.3L (4-cylinder) petrol engines during timing chain or belt overhauls.

Made in China

Mercedes-Benz и MAN - Professional Rear Axle Nut Socket with Locating Tube 80-95mm, 3/4″ Dr. – MG51482
A heavy-duty commercial vehicle pin-type socket with an integrated internal alignment tube, precisely engineered to remove and install rear axle hub nuts.
Ideal for professional servicing on Mercedes-Benz Atego, Vario 814, and MAN trucks.

Made in China

Clic and Clic-R Hose Clamp Pliers (Angle Type with Swivel Jaws) – MG51345

Heavy-duty angled hose clamp pliers specially designed to easily remove and install reusable Clic and Clic-R type metal clamps. Features 360° swivel jaws to easily navigate tightly packed engine bays and approach clamps from any restrictive angle.

Made in China

Professional Brake Pipe Flaring Tool – 4.75mm (3/16") DIN Single Flare, 51065

A compact and highly efficient handheld tool designed to create accurate DIN single bubble flares on 4.75mm or 3/16" brake pipes. Features a smart design that allows for convenient in situ use directly on the vehicle.

Made in China

1/2"Dr. 70-350 Nm Torque Wrench, 51395

Description:

Heavy-duty 1/2" drive torque wrench with a 70-350 Nm range.
Features ±4% accuracy, a 45-tooth reversible ratchet, and a knurled aluminum handle.

Made in China

1/2" Dr. Socket rail, 819409

L- 260 mm

9 pcs

Made in Taiwan, Force

Door upholstery tack remover, 50939

Designed to remove the car door panel.
Comfortable extended handle.
Made of heat treated carbon steel.
Screwdriver length: 200 mm

Made in China

7-Drawer Roller Tool Cabinet & 224 pcs tools

Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake

Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13  мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm  Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent  90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g

Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm

Made in China

GM / Opel SGE Engines - Injector and Rail Assembly Removal Tool Set – MG51477

A master 18-piece specialized service kit engineered for the damage-free extraction of direct-injection fuel injectors and fuel rail assemblies. Specifically tailored for General Motors and Vauxhall / Opel vehicles equipped with the modern SGE (Small Gasoline Engine) family.

Made in China

1/2″ Dr. (F) x 3/4″ Dr. (M) - Professional Low Profile Socket Adaptor – MG51390

A heavy-duty, low-profile socket adapter engineered specifically for high-torque tasks in restricted or confined spaces. Enables you to seamlessly use larger 3/4″ drive sockets with your standard 1/2″ drive ratchets and impact/breaker bars.

Made in China

1/2"Dr. 40-210 Nm Torque Wrench, 51394

Description:

Heavy-duty 1/2" drive torque wrench with a 40-210 Nm range.
Features ±4% accuracy, a 45-tooth reversible ratchet, and a knurled aluminum handle.

Made in China

Frame Rack Clamp Bar 5 Ton Capacity, 51319

Description: Double-grip frame straightening clamp bar with a 5-ton capacity, designed for pulling and straightening vehicle frames in professional auto body repair shops.

Application:

Designed for restoration, repair, and maintenance of vehicle body structures after accidents, corrosion, or wear. This includes straightening deformations, welding, panel replacement, painting, and geometry adjustment to restore the vehicle to a safe and functional condition. This includes:
• Straightening deformations: Restoring the original shape of metal parts after impact.
• Welding and cutting: Removing damaged components and installing new or sound elements.
• Panel replacement: Doors, fenders, hoods, roofs.
• Geometry adjustment: Restoring correct chassis geometry, critical for vehicle safety.
• Surface preparation and painting: Priming, sanding, and painting to prevent corrosion and restore appearance.
• Anti-corrosion protection: Treatment of the vehicle underbody and cavities.

Made in China

15-58mm Bearing separator, 50132-5

Used to remove small gears, wheels and fittings from shafts where ordinary puller claws cannot reach.
Use with standard pullers.
Working range: 15-58 mm
Chrome plated.
Forged.

Made in China

Pneumatic Brake Fluid Bleeder & Clutch Fluid Refilling Kit (3L / 1L with 16 Adapters), 51253

Professional-grade 1/2" air inlet pneumatic brake system bleeder and filler kit MAGMA MG51253, featuring a 3-liter pressure extraction tank, a 1-liter refilling bottle, and a 16-piece adapter set for one-man operation.

Made in China