INSTRUMENTS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
Magnetic Protective Wing Cover, 50271
Magnetic Protective Wing Cover, 50271
Protects the car from damage during maintenance and repair work.
Integral magnetic strips fix the mat in the correct position.
Size: 820x630 mm
Made of polypropylene.
Made in China
Hydraulic Crimping Tool Set, 51346
- Application: Designed for crimping cables and wires with sizes from 6 mm² to 70 mm² (square millimeters).
- Pressure/Force: The tool typically applies a force of 5 to 8 tons (70 kN).
- Made in China
MINI N12, N16, N18 - Valve Pressure Spring Remover and Installer Set, 50589
MINI N12, N16, N18 - Valve Pressure Spring Remover and Installer Set, 50589
Features: Designed to remove and install the pressure spring on intermediate lever.
Application:
MINI: Clubman, Clubvan, Countryman, Cooper, Coupé, Mini One, Paceman, Roadster.
Citroen: C3, C3 Picasso, C4, C4 Picasso, C5, DS3, DS4, DS5.
Peugeot: 207, 208, 3008, 308, 5008, 508, RCZ, Partner.
Engine codes:
MINI: N12, N16, N18
PSA: EP6, EP6CDT, EP6CDTM
OEM tools: 11 9 571/0197-3B1, 11 9 572/0197-3B2.
Made in China
Coil spring compressor, HSE1107A
Coil spring compressor, HSE1107A
Tempered Chrome-molybdenum steel jaws with ACME threaded lead screw quickly & safely compress coil springs on all passenger cars & pick up trucks.
Lenght: 300 mm
Made in China
Magnetic Fender Cover, 50270
Magnetic Fender Cover, 50270
Fatures: To protects the vehicle fender during repair work.
Size: 790х590 mm
Made in China
18 pcs Universal caliper wind back set, 50060
18 pcs Universal caliper wind back set, 50060
• Provides both left-handed and right-handed thrust bolt assemblies
• Complete set of adaptors for a wide range of vehicle applications
• Designed for push back and wind back brake pistons
• Left-handed thrust bolt required for Ford, Citroen, and Renault applications
• Adaptor plates with thrust bolt assembly and reaction plate are precisely made
• Prevents damaging pistons and seals
• Updated adaptor set applicable for wide variety of vehicles
Vacuum Oil and Fluid Extractor, 50546
Vacuum Oil and Fluid Extractor, 50546
Suitable for the extraction of engine oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. Also suitable for low viscosity fluids such as water.
Do not use with petrol or other flammable liquids.
Tank base for feet to step on to stabilize the tank while pumping.
Capacity 5.5L.
Made in China
Ball joint separator, HS1075
Ball joint separator, HS1075
Heat treated drop forged steel body & bolt for long rough usage.
Spread ball joints easily where space prevents use of direct action method.
This tool seperates tie rod ends and ball joints from suspension components.
Heavy duty all metal construction.
High quality ball joint seperator suitable for cars and light commercial steering and suspension joints.
Jaw open: 19 mm
Made in China
3 Jaws Gear puller 8”, 50742D
3 Jaws Gear puller 8”, 50742D
Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Puller Size: 8”
Capacity: 80 – 203 mm
Made in China
Air vacuum dent puller with 3 pads, 178-0169A
Air vacuum dent puller with 3 pads, 178-0169A
Contents:
3 pads: 75 mm, 100 mm, 125 mm
Working pressure: 5 - 12 Bar (70 - 170 Psi)
Made in Taiwan
21 PCS Universal Brake Caliper Wind Back Kit
21 pcs Universal Brake Caliper Wind Back Kit, 50061
Suitable for push back and wind back brake pistons.
Includes left- and right-handed thrust bolt assemblies.
Left-handed thrust bolt required for Ford, Citroen and Renault applications.
Adaptor plates with thrust bolt assembly and reaction plate.
Helps prevent damage to pistons and seals.
Updated adaptor set suitable for a wide variety vehicles. Supplied in carry-case.
18 Pcs 1/2" Drive Wheel Nut Socket Set, 51168
18 Pcs 1/2" Drive Wheel Nut Socket Set, 51168
A Professional-grade solution designed for the safe and efficient removal of standard, damaged, and locking wheel nuts. Each socket is equipped with a protective plastic sleeve to prevent scratches and damage to alloy wheels during operation.
This comprehensive set includes double-ended twist sockets, specifically engineered for removing damaged nuts and bolts, as well as locking wheel nuts. The double-ended wheel nut sockets are ideal for situations where the chrome cap is missing or damaged, ensuring a secure grip and easy removal.
Manufactured from high-quality chrome molybdenum (Cr-Mo) steel, the sockets offer exceptional strength, impact resistance, and long service life. Designed for use with 1/2" drive impact tools, this set is suitable for professional workshops, tire service centers, and demanding home users.
Seal Puller 50107
Seal Puller 50107
Used to remove oil and grease seals
Two different size tips enables this tool to accommodate most applications.
Made in China
8 Pcs Drive Shaft Socket Set, 50486
8 Pcs Drive Shaft Socket Set, 50486
For loosening and tightening screws on drive shafts.
Contents:
5 pcs 1/2"Dr. 12-pt Impact deep sockets: 27, 30, 32, 34, 36mm
3 pcs 1/2”Dr. Impact hexagon key: 14, 17, 19mm
Material: CR-Mo
Made in China
3 Jaws Gear puller 10”, 50742E
3 Jaws Gear puller 10”, 50742E
Heat treated, forged alloy steel with rust-resistant.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.
Puller Size: 10”
Made in China
