INSTRUMENTS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
3 Jaws Gear puller 10”, 50742E
3 Jaws Gear puller 10”, 50742E
Heat treated, forged alloy steel with rust-resistant.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.
Puller Size: 10”
Made in China
BMW Final Drive Input Shaft Socket 37 Splines, 51440
BMW Final Drive Input Shaft Socket 37 Splines, 51440
Specialized socket for holding the rear axle final drive input shaft when loosening/tightening the flange nut. Fits BMW RWD/4WD.
Made in China
Ford, Volvo - Trailing Arm Bush Tool, 50968
Ford, Volvo - Trailing Arm Bush Tool, 50968
Designed for the removal and installation of the rear trailing arm mounting bushes on Ford vehicles.
Also suitable for some Volvo vehicles that share the same Ford platform.
The bush can be replaced without removing the trailing arm from the vehicle.
Applications:
Ford: Mondeo MK4 (2007-), S-Max ( 2006-), Galaxy (2006-)
Volvo: S60, S80, XC60, V70, XC70 (2006-)
Made in China
Magnetic Fender Cover, 50270
Magnetic Fender Cover, 50270
Fatures: To protects the vehicle fender during repair work.
Size: 790х590 mm
Made in China
3 Jaws Gear puller 12”, 50742F
3 Jaws Gear puller 12”, 50742F
Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.
Puller Size: 12”
Made in China
BMW Final Drive Input Shaft Socket 27 Splines, 51439
BMW Final Drive Input Shaft Socket 27 Splines, 51439
Heavy-duty socket for holding the rear axle input shaft on BMW M-series models during flange nut servicing.
Made in China
Mercedes-Benz Ball Joint Socket 43mm, 51043
Mercedes-Benz Ball Joint Socket 43mm, 51043
For quick, easy and professional loosening and tightening of the supporting joint flat nut.
The design of the socket wrench allows the supporting joint pin to be held in place when the nut is loosened or tightened, and it allows the use of a 1/2" screwdriver. The socket wrench specially adapted to the nut engages frictionally in the nut profile.
Slipping is impossible and the high tightening torque (up to 250 Nm) can be applied and transmitted precisely.
Technical data
Drive 1/2" or 30mm Combinationa wrench
Size: 43 mm
Mercedes-Benz Application:
W 167: GLE and GLS front and rear axle
W 205: C-Class 4Matic and AMG models (sedan, T-model, coupe and convertible) front axle
W 213: E-Class 4Matic and AMG models (sedan, model T) front axle
W 238: E-Class 4Matic and AMG models (coupé, cabriolet) front axle
W 253: GLC AMG and GLC Coupé front axle
W 257: CLS 50 AMG Coupé front axle
Made in China
Air vacuum dent puller with 3 pads, 178-0169A
Air vacuum dent puller with 3 pads, 178-0169A
Contents:
3 pads: 75 mm, 100 mm, 125 mm
Working pressure: 5 - 12 Bar (70 - 170 Psi)
Made in Taiwan
Final Drive Input Shaft Socket 34 Splines for BMW, 51020
Final Drive Input Shaft Socket 34 Splines for BMW, 51020
Specialized socket designed to hold the rear axle final drive input shaft when servicing the flange nut. Fits BMW RWD and 4WD series.
Made in China
19 Pcs Air Hammer Kit, 93988
19 Pcs Air Hammer Kit, 93988
Track Rod Hammer
5mm Hammer
1/2" Dr. Adaptor Hammer
63mm Large Concave Hammer
38mm Medium Flat Hammer
74mm Large Flat Hammer
Air Hammer
impact ball joint separator, 7"X 24mm, 7" X 20mm
Point Chisel
20mm Flat Chisel
38.5mm Diameter Body ·
Smoother Hammer
Impact exhaust slitting chisel ( bend )
Pneumatic Plug insertion needle φ4mmX152mmL
29mm Polyoxymethylene(POM) Hammer
29mm Copper Hammer
29mm Aluminum Hammer
29mm Track Rod Hammer
Manual operation dent puller with 10 pcs glue pads, 160-3113
Manual operation dent puller with 10 pcs glue pads, 160-3113
Perfect hand tool for repairing small dents on the vehicle compartment.
Contains: Adjustable clamp with plastic protectors and aluminum housing and 10 pcs. removable pads.
Rotating pads provide stability when working on non-linear surfaces.
How it works can be seen in the following video:
Made in Taiwan
18 pcs Universal caliper wind back set, 50060
18 pcs Universal caliper wind back set, 50060
• Provides both left-handed and right-handed thrust bolt assemblies
• Complete set of adaptors for a wide range of vehicle applications
• Designed for push back and wind back brake pistons
• Left-handed thrust bolt required for Ford, Citroen, and Renault applications
• Adaptor plates with thrust bolt assembly and reaction plate are precisely made
• Prevents damaging pistons and seals
• Updated adaptor set applicable for wide variety of vehicles
3/4" Dr. 46mm 12-Point Crowfoot Spanner Wrench, 51355
3/4" Dr. 46mm 12-Point Crowfoot Spanner Wrench, 51355
Premium 46 mm Crowfoot wrench with a 12-point (bi-hex) profile and 3/4" square drive. Specifically designed for working with plumbing and pipe connections in restricted spaces.
Made in China
80-120 mm Heavy Duty 3-Jaw Oil Filter Wrench, 51423
80-120 mm Heavy Duty 3-Jaw Oil Filter Wrench, 51423
Professional heavy-duty 3-jaw wrench designed for easy removal and installation of oil filters ranging from 80mm to 120mm.
Made in China
Mini sliding hammer with 10 pcs glue pads, 160-3123
Mini sliding hammer with 10 pcs glue pads, 160-3123
Complete with 10 pcs glue pads and a mini sliding hammer for reducing small dents on the vehicle body. It is recommended for manual operation.
Contents:
Mini sliing hammer 0.95LB (0.43 kgs }
10 pcs Glue Pads (Plastic Connectors)
Made in Taiwan
