INSTRUMENTS

37 PCS 1/4" Drive Go-Through Socket & Bit Set - MG51418

Versatile 37-piece tool set featuring a 72-tooth Go-through ratchet system  for Hex, Square, Spline, and Torx fasteners.

Made in China

The Smoke Leak Detector Kit is your ultimate solution for quickly and accurately locating those elusive, hidden leaks in automotive systems. Designed for professional use and DIY enthusiasts, this tool generates safe smoke under low pressure, making even the smallest leaks visible that would otherwise be impossible to detect.

Key Features:

• Wide Application: Works seamlessly with intake, exhaust, and fuel systems (non-direct injection), as well as turbochargers, intercoolers, EGR valves, and vacuum hoses.
• Built-in Pressure Gauge: Easily monitor system pressure during testing for precise diagnostics.
• Dual Operating Modes:
  • Air Mode: Pressurize the system to identify pressure drops efficiently.
  • Smoke Mode: Generate smoke to visually pinpoint the exact location of leaks.
• User-Friendly Design: Compact and equipped with a convenient hanging hook for easy use in the engine bay.
• 12V Power Supply: Simply connect to a standard 12V vehicle battery for operation.

Advantages:

• Fast and accurate detection of leaks.
• Saves valuable time and money on troubleshooting.
• An essential tool for automotive workshops and dedicated enthusiasts alike.

Don't waste any more time guessing—get your Smoke Leak Detector Kit today and find leaks with ease and precision!

Coil spring compressor, HSE1107A

Tempered Chrome-molybdenum steel jaws with ACME threaded lead screw quickly & safely compress coil springs on all passenger cars & pick up trucks.
Lenght: 300 mm

Made in China

Mini sliding hammer with 10 pcs glue pads, 160-3123

Complete with 10 pcs glue pads and a mini sliding hammer for reducing small dents on the vehicle body. It is recommended for manual operation.
Contents:
Mini sliing hammer 0.95LB (0.43 kgs }
10 pcs Glue Pads (Plastic Connectors)

Made in Taiwan

21 pcs Universal Brake Caliper Wind Back Kit, 50061

Suitable for push back and wind back brake pistons.
Includes left- and right-handed thrust bolt assemblies.
Left-handed thrust bolt required for Ford, Citroen and Renault applications.
Adaptor plates with thrust bolt assembly and reaction plate.
Helps prevent damage to pistons and seals.
Updated adaptor set suitable for a wide variety vehicles. Supplied in carry-case.

Timing Belt Checking Gauge, meticulously designed for PureTech 1.0 and 1.2 liter engines (PSA group). This gauge is essential for maintaining engines where the belt is immersed in oil, which can lead to wear and potential damage over time.

With this tool, you can quickly and easily measure the width and wear of the belt. Early detection of thinning below the acceptable minimum allows for timely replacement and prevents serious engine damage.

Key Features:

• Specifically designed for PSA PureTech 1.0 and 1.2 liter engines (EB-series).
• Enables quick and easy measurement of timing belt wear.
• Helps prevent serious engine damage by detecting wear early.
• Compatible with models from Peugeot, Citroën, Opel, and DS Automobiles manufactured after 2012.
• OEM#: G-0109-6 / EN-52809
• Origin: China

Application: Compatible with petrol 1.0 and 1.2 liter PureTech engines (EB-series) of the PSA group, produced after 2012, including models of Peugeot, Citroën, Opel and DS Automobiles.

Ball joint separator, HS1075

Heat treated drop forged steel body & bolt for long rough usage.
Spread ball joints easily where space prevents use of direct action method.
This tool seperates tie rod ends and ball joints from suspension components.
Heavy duty all metal construction.
High quality ball joint seperator suitable for cars and light commercial steering and suspension joints.
Jaw open: 19 mm
Made in China

Adaptor +10 pcs Small Damage Repair Kit, 160-0211

The kit contains an adapter and 10 pcs removable pads, of different shapes and sizes, suitable for straightening small recesses in the car body.

Made in Taiwan

35 pcs Universal caliper wind back set, 50064

Suitable for push back and wind back brake pistons.
Includes left- and right-handed thrust bolt assemblies.
Left-handed thrust bolt required for Ford, Citroen and Renault applications.
Adaptor plates with thrust bolt assembly and reaction plate.
Helps prevent damage to pistons and seals.
Updated adaptor set suitable for a wide variety vehicles. Supplied in carry-case.

The 3/8"Dr. 22mm Oxygen Sensor Socket 50323C is an essential tool for removing and installing oxygen sensors.

• Drive: 3/8" for compatibility with standard ratchets and extensions.
• Size: 22mm, 6-point (hex) design ensures a secure grip on the sensor.
• Durable Construction: Made from high-quality Chrome Vanadium steel for strength and longevity.
• Slotted Design: Features a 20mm wide slot to accommodate sensor wiring during removal and installation, preventing damage.

Made in China

8 Pcs Drive Shaft Socket Set, 50486

For loosening and tightening screws on drive shafts.
Contents:
5 pcs 1/2"Dr.  12-pt Impact deep sockets: 27, 30, 32, 34, 36mm
3 pcs 1/2”Dr. Impact hexagon key: 14, 17, 19mm
Material: CR-Mo

Made in China

Windshield Removal Tool Set, 50220

This universal kit includes all of the specialised tools required to safely and quickly remove windshields from a wide variety of vehicles.
Item is supplied with a rubber gasket knife, cutting wire, two (2) handles, wire feeder tool, trim pad remover and molding release tool.

Set includes:

- Wire: Three strong galvanised steel wires braided to form one wire
- 2 pcs Wire gripping handles: Feed the wire through the hole in the wedge shaft. Loop it through the hole at the top of the shaft. Then back into the handle. Pressing the wedge back into the handle, the wire is held.
- Windshield removal tool: Cuts the vinyl adhesive compound around the windshield.
- Wire feeder tool: Designed for easy and flexible insertion of wire through polyurethane, allowing speedy removal of bonded windshield
- Trim pad remover: Place the tool under the edge of the door upholstery panel and insert it into the fastener as far as possible, then simply pry up.
1PC stainless steel wire with reel.
2PCS Wire gripping handles.
1PC Windshield removal tool
1PC Wire feeder tool
1PC Trim pad remover
1PC Windshield molding release tool

Made in China

3/8"Dr. 84.5mm х 14 flutes Oil Filter wrench, 647-1160-B

Designed for durability and a perfect fit, this wrench makes oil changes a breeze.

Key Features:

• 3/8" Drive: Compatible with standard 3/8" drive tools for easy use.
• 84.5mm Diameter: Precisely sized to fit oil filters with an 84.5mm diameter.
• 14 Flutes: Provides multiple contact points for a secure, non-slip grip.
• Durable Construction: Made from high-quality materials for long-lasting performance.

17 pcs Master Front Wheel Drive Bearing Service Kit, 50405

Comprehensive set for the removal and installation of front hub bearings
Without the need to dismantle the steering assembly.
Heavy Duty Steel Drifts
Hub Screws - M12 x 1.5 and M14 x 1.5mm
Drift sizes - 55.5.59.62.65.66.71.5.73.78.84.86.91mm
Suitable for most front wheel drive cars and vans.

Made in China

9 pcs. 1/2"Dr. Wheel nut Impact socket set, C4092

Contents:

9pcs. Hex Impact Socket bit (One piece)

H5; H6; H7; H8; H10; H12; H14; H17; H19

Lenght: 78mm

Material: Cr-Mo

Made in Taiwan