INSTRUMENTS

5 Pcs Ball Joint Separator, 50435

Content:
Ball Joint Separator
Tie Rod And Ball Joint Remover
Conical Pitman Arm Puller
Pitman Arm And Tie Rod End Puller
Pitman Arm Puller

Description:
Ball Joint Separator - For separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles adjustable for different size ball joints
1-1/8" & 2-1/8" (30 & 56mm) maximum opening capacity
7/8" jaw spread, 2-1/4" throat depth
Tie Rod And Ball Joint Remover - A universal heavy-duty puller that removes a wide range of tie rods and ball joints from a variety of cars, trucks, SUVs and heavy-duty vehicles.
0 to 2-1/2" jaw spread, 3-1/4" throat depth
Conical Pitman Arm Puller - Designed to fit securely on Pitman arms for compact and mid-size cars.
3/4-16 x 4-3/4" forcing screw provides enough power to remove stubborn pitman arms.
Pitman Arm And Tie Rod End Puller - This versatile tool can be used as a pitman arm remover for many small, domestic rear-wheel drive vehicles, or as a tie rod end puller for many domestic and import vehicles. The jaws, with a spread of 1", give a secure positive grip in tight workspaces.
1-1/8" jaw spread, 2-1/8" throat depth
Pitman Arm Puller - This puller will handle nearly any pitman arm job on passenger cars and light trucks. It features special forged jaws, shaped to fit most models, keeping a solid grip while you work.
1-11/32" jaw spread, 2-1/2" throat depth

Made in China

10-32mm 1/2"Dr. 12-pt 15 pcs Flank deep socket set, C4151-9

Material: Cr-V

Contents: 10; 11; 12; 13; 14; 15; 16; 17; 19; 21; 22; 24; 27; 30; 32 mm

Produced by Pard, Taiwan

2 Pcs Car Door Panel Trim Upholstery Clip Remover Tool, 50935

For easy remove door panel clips, upholstery, and trim without damage.

Convenient extended handle.
Made of heat-treated carbon steel.
Overal lenght: 240 and 260 mm

Made in China

Brake caliper piston tool set, 50407

Apply for most European and Japanese cars - Audi, Ford, Honda, Jaguar, Mazda, Mitsubishi, Nissan, Skoda, Seat, Saab, Volvo, Rover, Subaru, Toyota, VW
Adopted with vanadium steel material, higher hardness and not easy to deform.
Distance between pin centers: 22mm and 32mm.

Get into those tight spots with ease using our 30mm 1/2" Drive Crowfoot Spanner! This specialized tool is perfect for reaching fasteners inaccessible to standard sockets.

• Size: 30mm, 12-pt.
• Drive: 1/2"
• Ideal for tight spaces

Made in China

M16x2.5 Spindle for Press and Pull Sleeve Kit, 50093-4

Pulling spindle with nuts and thrust bearings.

Size: M16x2.5 mm

Length: 450 mm

Material: carbon steel

Made in China

10-24 mm 1/2"Dr. 6-pt. Flank impact deep socket set, C4112

Material: Cr-Mo

Over: 85 mm

Contents:

10; 11; 12; 13; 14; 15; 17; 19; 21; 22; 24 mm

Produced by Pard, Taiwan

Auto body repair pull clamp (Two way),113-01027NN

Compact and suitable for use in different spaces.
With two-way direction:
-Cross capacity: 2 tons
- Longitudinal capacity: 3 tons
- Gripping Surface: 37mm (wide) / 15mm (deep)
- Material: Cr-Mo
Bolt size: 14 mm x 120 mmL
Zinc plated. Corrosion resistant.

Made in Taiwan

Disc Park Brake calliper tool, 65806
Applicable:
FORD Australia/nz Telstar, laser (R), MAZDA (R),
SAAB 9000 (R), FIAT/Alfa Romeo 164 2.0 (R),
HONDA/Prelude, 16 16i GA/Saturn (R)

8 pcs Timing Locking Tool Set, 50088

For Locking and Setting Timing when replacing timing belts

Suitable for: Opel, VW, Audi, Skoda, Seat, Ford, Citroen, FIAT, Peugeot, Isuzu, Saab und Rover

Contents:
Flywheel locking tool Citroen: 2.0 petrol engines, Peugeot: 1.6, 2.0 petrol engines, 2.0, 2.1 TD engines
Crankshaft locking tool Audi: 1.2. 1.4, 1.9, 2.0 TDI PD, Seat: 1.4, 1.9, 2.0 TDI PD, Skoda: 1.4, 1.9, 2.0 TDI PD, VW: 1.4, 1.9, 2.0 TDI PD, 2.0 SDI
Camshaft locking tool Rover: 1.4, 1.6, 1.8 V16 engines
Twin camshaft locking tool Opel: 1.6 CNG, 1.6 V16, 1.8i, 1.4, 1.6, 1.8 petrol engines
Twin camshaft locking tool Opel: 2.0 OPC/VXR, 2.0 Turbo, 1.8 V16, 2.0, 2.2 petrol engines
Flywheel locking tool Opel: 1.2, 1.4, 1.6 petrol engines, 1.7 TD, 1.6, 1.7 D engines
Camshaft locking tool Opel: 2.5, 2.6, 3.0, 3.2 V6, 2.5, 2.6 V6i, Saab: 2.5, 3.0 V6 engines
Camshaft locking tool Opel: 2.5, 2.6, 3.0, 3.2 V6, 2.5, 2.6 V6i, Saab: 2.5, 3.0 V6 engines

Models:
Citroen: Jumper
Peugeot: 406, 605, 806
Audi: A2, A3, A4, A4 Quattro, A6, A6 Quattro
Seat: Alhambra, Arosa, Cordoba, Ibiza, Leon, Toledo
Skoda: Octavia, Roomster, Superb
VW: Beetle, Bora, Caddy, Caddy Maxi, Golf, Jetta, Passat, Polo, Sharan, Tiguan, Touran, Transporter
Rover: 111, 114, 211, 214, 214/216 Cabrio, 216 V16 Coupe, 218, 414, 416, 25, 45, 75, Metro, VVC, MGF, TF
Opel: Astra -F, -G, -H, Combo, Corsa -A, Calibra, Meriva, Signum, Tigra, Vectra -B, -C, Zafira -A, -B, Frontera -A, -B, Omega -B, Speedster, Kadett, Cavallier, Ascona -C, Sintra
Saab: 900, 9000, 9-5

Engine code:
Citroen: RTZ
Peugeot: XU10J2CTE, XUD11BTE, XU5JP, XUD11BTE, XU10J2TE/Z, XUD11BTE, XU10J2C/Z
VAG: ANY, ATL, BHC, AMF, BKC, ASZ, ATD, AXR, AVB, AVF, AWX, ATJ, AJM, BNA, BRF, BVF, BVG, BLB, BRE, BVA, BRD, AUY, BTB, BVK, ANU, BJB, BKC, AZV, BKD, BMN, BMS, BNV, BMT, BPX, BUK, BLT, BXE, ARL, BMM, BSW, BZS, BLS, AWB, BSU, BDJ, BST, AYZ, BRU, BGW, BHW, BMA, BUZ, BVE, BWV, BMP, BMR, BKP, BAY, BWB, AXR, BVK, BXF, AVQ, AXC, BRR, AXB
Opel: Z18XE, X18XE1, X18XE, Z18XEL, Z16YNG, X14XE, Z14XE, X16XEL, Z16XE, Y16XE, X16SEJ, X18E1, X20XEV, Z20LEH, Z20LER, Z20LEL, X22XE, X22SE, Y22SE, Y22XE, Z22XE, C20SEL, X20EV, Z20LET, 16DA, 17DA, E14LV, C14NZ, 14NV, C16NZ, E16NZ, C16LZ, 16SV, C16NZ2, X16SZ, 17DR, 12NV, C12NV, C14SE, C14SEL, C16SEL, E14LV, C16SE, X17DTL, X25XE, X30XE, Y26SE, Y32SE

Made in China

16 Pcs EPR Socket Set, 51326

Introducing the versatile 16 Pcs EPR (EPR – External Pipe Remover/Extractor Profile)  Socket Set, a must-have for any toolbox! This comprehensive set is designed to tackle a wide range of tasks, ensuring you're always prepared. Each socket is crafted for durability and precision, offering reliable performance and a secure fit.

• Comprehensive Set: Includes 16 pieces for various applications.
• Durable Construction: Made with high-quality materials for long-lasting use.
• Precise Fit: Engineered for a secure grip, reducing slippage and preventing damage.

Ford - Torque Multiplier Set, 51201

Features: To remove and install the crankshaft pulley bolt, in order to replace the timing belt.
Suitable for Ford 1.0 Ecoboost, 1.0 / 1.1 Duratec, 2.0 EcoBlue and 2.0 Duratorq-TDCi engine.

Max. torque input: 300Nm.
Max. torque output: 1500Nm.
Gear ratio: 1:5.
Input drive: 1/2".
Output drive: 3/4".

Applicable:
Ford B-MAX, C-MAX, EcoSport, Fiesta, Focus, Mondeo, Grand Tourneo Connect, Tourneo Connect, Transit Connect, Transit Courier

OEM# tools: 303-1611, 303-1611-01, 303-1611-02.

Made in China

M14x2.0 Spindle for Press and Pull Sleeve Kit, 50093-3

Pulling spindle with nuts and thrust bearings.

Size: M14x2.0 mm

Length: 450 mm

Material: carbon steel

Made in China

Auto body repair pull clamp (Two way),113-01017C

Compact and suitable for use in different spaces.
With two-way direction:

-Cross capacity: 2 tons
- Longitudinal capacity: 5 tons
Bolt size: 16 mm x 70 mmL
Zinc plated. Corrosion resistant.

Made in Taiwan

Brake Piston Wind Back Tool, 50066

Specifications:
Chemically blackened steel spreader plates
Suitable for most ATE, Bendix, Delco, Brembe and Girling calipers
Fitted with tommy bar
Chrome screw with linking bar
Capacity: 0 ~ 2.5" (0 ~ 65mm)
Applications:  Alfa, Audi, Fiat, Ford, Nissan, GM (Vauxhall/Opel), Peugeot, Renault, Rover, VW, Porsche. The list is endless...