INSTRUMENTS

21 pcs Impact Spiral Twist Socket Set for Damaged Nut & Bolt Removal  51421

Professional 21-piece set designed to easily remove rusty, damaged, or rounded nuts and bolts.
Manufactured from premium Chrome Molybdenum steel (CR-MO) for heavy-duty impact use.

Made in China

BMW B38, B48 – Valve Pressure Spring Tool Set, 51108

Features:  To remove and install the pressure spring on intermediate lever of the engine. It can easily install and remove the valve pressure spring without damaging the engine.
Made of heavy-duty steel material, high-quality material,high strength, high hardness, coated with anti-oxidation,which can effectively prevent the tool from rusting.
Applicable: Suitable for BMW and MINI B38, B48 petrol engines.
BWM 1 series, 2 series, 3, 4 series, X1 all from 2015.    X2 from 2018 & i8 from 2014.    MINI Hatch from 2014, Clubman from 2015, Countryman from 2017.
Engine codes BMW & MINI B38 A15A, B38 B15A, B38 K15A, B48 A20A, B48 A20B, B48 B20A, B48 B20B.

OEM#: 2 359 088, 2 359 089.

Made in China

Mercedes Benz Ball Joint Remover Installer Set, 50453

Spesialized 10-Piece tool kit to service all of the pressed-in ball joints incorporated in the Mercedes W210 / W211 / W220 / W230 / W163/ W164 suspensions.
This tool set allows servicing (installation and removal) of the specified ball joints on the vehicle. This saves tremendous time and effort by avoiding the necessity of disassembling the brake system and other suspension components that would disturb suspension alignment.
Includes:
C-Clamp press tool forged (not cast) form SCM440 Steel (HRC 38-42 hardness)
Front Suspension Ball Joint press fixtures for W220 / W211 / W230 Chassis - used in Conjunction with the C-Clamp Press.
Front Sway Bar Ball Joint (pressed into control arm) press fixtures for W220 /
W211 - used in Conjunction with the C-Clamp Press.
Front & Rear Suspension Ball Joint press fixtures for W163 / W164 Chassis - used in Conjunction with the C-Clamp Press.
Ball joint socket (4-prong) for servicing front ball joint on W163 / W164 Chassis
Application: Mercedes Benz
W210 Chassis - 1995-2002 E Class
W211 Chassis - 2002-2009 E Class
W220 Chassis
W230 Chassis
W163 Chassis - 1998-2005 M Class
W164 Chassis - 2006-present M Class

Made in China

10-32mm 1/2"Dr. 12-pt 15 pcs Flank deep socket set, C4151-9

Material: Cr-V

Contents: 10; 11; 12; 13; 14; 15; 16; 17; 19; 21; 22; 24; 27; 30; 32 mm

Produced by Pard, Taiwan

Auto body repair pull clamp (Two way),113-01027NN

Compact and suitable for use in different spaces.
With two-way direction:
-Cross capacity: 2 tons
- Longitudinal capacity: 3 tons
- Gripping Surface: 37mm (wide) / 15mm (deep)
- Material: Cr-Mo
Bolt size: 14 mm x 120 mmL
Zinc plated. Corrosion resistant.

Made in Taiwan

10 pcs Tubing cutter & double flaring tool kit, 656M

Contents:
1 pcs - Tubing cutter
1 pcs - 9/16"Screen bar
7 pcs - Adaptors: 4, 6, 8, 10, 12, 14, 16 mm

Made in Force, Taiwan

20 pcs ATF Filling Adapter set 50897

Contents:
ATF 101 - Ford, 1/8-27 (NPT)
ATF 102 - Universal BMW, Honda, Nissan, etc.
ATF 103 - Volkswagen, Audi, Skoda, VAG.
ATF 104 - Volkswagen, Audi, Porsche,bended angle 60 , Replacement for VW Audi 01J Transmission
ATF 105 - Volkswagen, Audi, Mini Cooper M10x 1.0
ATF 106 - Volkswagen, Audi, DSG M24 x 1.5 Replacement for VW Audi DSG Transmission
ATF 107 - Volkswagen, Audi, CVT M22 X 1.5
ATF 108 - Mercedes-Benz M12 x 1.5
ATF 109 - 722.9, thread M12 x 1.5, Replacement for Mercedes Benz Transmission
ATF 110 - Volkswagen, Audi, VAG M30x 1.5
ATF 111 - 300 mm Universal flexible hose Honda, Hyundai, Kia, etc.
ATF 112 - Volvo 5/15-24 (UNF)
ATF 113 - Toyota, Lexus, BMW 7 series M18x1.5
ATF 114 - Nissan, Infinity M8x 1.0
ATF 115 - ATF Adaptor Volkswagen Passat
ATF 116 - Nissan Juke, Toyota, Subaru M12 x 1.25
ATF 117 - Mini Cooper, Mitsubishi M14x 1.5
ATF 118 - Nissan M10x 1.5
ATF119 - GM12X1.75
ATF 120 - Mercedes Benz 725-9G Transmission

Made in China

Coil Spring Compressor For Wishbone Suspensions, 50452

Suitable to work on lower supports with a small access (< 30 mm)
Suitable for more coil springs - Working range: 95 - 220  mm
100Nm Extension torque bar controls excessive torque being applied
Holder discs with wide application
Applicable to vehicles with a swing arm diameter of 30 mm and bigger.
Applicable:
Chrysler, Citroen, Ford, Honda, KIA, Mitsubishi, Peugeot, Renault, Seat, Skoda, Suzuki, Toyota, Volvo, Volkswagen,  etc.
BMW 3 series (1996-2013)
Mercedes Benz W202/ W204 (1997-2013)
Includes:
150 mm steel pressure plate
130 mm steel pressure plate
Compressing bar
Extension bar with 100 Nm torque control for use with impact wrench.

Made in China

10-24 mm 1/2"Dr. 6-pt. Flank impact deep socket set, C4112

Material: Cr-Mo

Over: 85 mm

Contents:

10; 11; 12; 13; 14; 15; 17; 19; 21; 22; 24 mm

Produced by Pard, Taiwan

Auto body repair pull clamp (Two way),113-01017C

Compact and suitable for use in different spaces.
With two-way direction:

-Cross capacity: 2 tons
- Longitudinal capacity: 5 tons
Bolt size: 16 mm x 70 mmL
Zinc plated. Corrosion resistant.

Made in Taiwan

12 pcs Bearing separator 30-75 mm, 50132

Bearing separator included 30-50 mm & 50-75 mm. Pull out the bearing wth the H-type beam and bolts.
Bearing separator tools are used with bar puller and legs for a wide variety of pulling jobs.

Brake Piston Wind Back Tool MG50407 – Universal

Function: Easy retraction of rear brake caliper pistons.
Type: Right-handed thread mechanism.
Compatibility: Fits most Japanese and European vehicles.

•    European: VW (Golf, Passat), Audi, Skoda, Seat, Opel, BMW, Ford и др.
•    Japanese: Toyota, Honda, Nissan, Mazda, Mitsubishi.

Set Includes: Rewind tool, double-sided adaptor, and reaction plate. Distance between pin centers: 22 mm and 32 mm.

Made in China

19 pcs External Torx Plus Socket Set (EP4 to EP32) 51327

Comprehensive 19pc EP socket set made of durable Cr-V steel, featuring a specialized 5-point EP8.8 socket for battery cover removal on modern EVs.

Made in China

55-175mm Valve Spring Compressor Multi-Valve  50853

Used to assist with the service and repair of multi-valve petrol and diesel engines with deep seated valves.
Suitable for general use on OHC, OHV and CVH engines.
Double plastic coated locking handles to keep valve springs positively compressed during work.
Jaw capacity: 55-175mm.
Throat clearance: 165mm.
Reversible jaw and adaptors.

Made in China

5 Pcs Ball Joint Separator, 50435

Content:
Ball Joint Separator
Tie Rod And Ball Joint Remover
Conical Pitman Arm Puller
Pitman Arm And Tie Rod End Puller
Pitman Arm Puller

Description:
Ball Joint Separator - For separating the ball joint from the spindle support arm on domestic and import front wheel drive vehicles adjustable for different size ball joints
1-1/8" & 2-1/8" (30 & 56mm) maximum opening capacity
7/8" jaw spread, 2-1/4" throat depth
Tie Rod And Ball Joint Remover - A universal heavy-duty puller that removes a wide range of tie rods and ball joints from a variety of cars, trucks, SUVs and heavy-duty vehicles.
0 to 2-1/2" jaw spread, 3-1/4" throat depth
Conical Pitman Arm Puller - Designed to fit securely on Pitman arms for compact and mid-size cars.
3/4-16 x 4-3/4" forcing screw provides enough power to remove stubborn pitman arms.
Pitman Arm And Tie Rod End Puller - This versatile tool can be used as a pitman arm remover for many small, domestic rear-wheel drive vehicles, or as a tie rod end puller for many domestic and import vehicles. The jaws, with a spread of 1", give a secure positive grip in tight workspaces.
1-1/8" jaw spread, 2-1/8" throat depth
Pitman Arm Puller - This puller will handle nearly any pitman arm job on passenger cars and light trucks. It features special forged jaws, shaped to fit most models, keeping a solid grip while you work.
1-11/32" jaw spread, 2-1/2" throat depth

Made in China