INSTRUMENTS

6 mm 1/2" Dr. Stud Extractor, 50922-6

Designed for removing studs without damaging the threads.
Safe clamping due to 3 rollers. The extractors are the concentric roller bearing type that won't damage the thread on the stud.
Material: Cr-V
1/2" Drive (Hex 21mm).
Size: 6 mm.

Made in China

20 PCS Oil Sump Drain Plug Key Set, 20019B

Suitable for sump plugs on engine, gearbox and back axle.
Contents:
Square Male Keys: 7, 8, 10, 11, 12,13, 14mm and 5/16"
Hex Keys: 8, 9, 10, 12, 14, 17mm
Square Female: 10mm
Triangular Key: 10mm PSA
Security Spline Key: M16
VAG Plastic Plug Bit
VAG Torx T45
Flexible Head Bar 200mm

Made in China

M12x2.0 Spindle for Press and Pull Sleeve Kit, 50092-2

Pulling spindle with nuts and thrust bearings.

Size: M12x2.0 mm

Length: 350 mm

Material: carbon steel

Made in China

Standard engine cylinder hone 51 - 177 mm, 530-0100

• Fast Accurate deglazing of cylinders of 2" to 7" in diameter

• 3, 4" long stone bars, 220 Grit Aluminum Oxide, replaceable

• Adjustable collar to prevent stone breakage and control diameter

• Use with 3/8" or 1/2" everyday portable drill or drill press

• Flexible shaft to tool centering, adjustable tension on stone blades

Made in Taiwan

10 ton Hydraulic gear jaw bearing separator puller kit, 50457

Features:
Multifunctional gearbox for removal of gears and bearings. Included in the kit are separator  and three size brackets for three-ball bearings. It is suitable for a wide range of vehicles.
Contents:
10 Ton Hydraulic Ram
Twin Head Adapter for using as a 2 jaw puller
Triple Head Adapter for using as a 3 jaw puller
Two-way Cross Beam
3 x Gear Puller Legs/Jaws 100mm (4'')
3 x Gear Puller Legs/Jaws 150mm (6'')
3 x Gear Puller Legs/Jaws 200mm (8'')
2 x Main Rods
2 x Extension Rods
Center Extension Adapters 20 - 35 - 85mm
Bearing Separator 75-105 mm ...

4 pcs Door service set, 211-0050

4 pc set: to quickly and efficiently remove doors panels, upholstery, door clips, door windows, windshield molding and more
The door panel disassembly kit contents:
- a tool for removing the door handle,
- two tools for removing the door panels,
- rivet and clip removal tool.
The set has a wide range of applications.Excellent value: an essential tool for the shop or weekend car hobbyist, no need to buy multiple tools - this kit does it all

Made in Taiwan

1/2” Dr. E20 Cylinder Head Wrench-Man, 50811

Features: For loosening and fastening cylinder head screws. Removing the injector no longer necessarily.
Ideally suited for commercial vehicles.
Profil: E-Torx.
Drive: Square, 1/2".
Applicable: MAN series F2000 / F90 / F8, MAN buses with D25 and D28 engines.

Made in China

M10x1.5 Spindle for Press and Pull Sleeve Kit, 50092-1

Pulling spindle with nuts and thrust bearings.

Size: M10x1.5 mm

Length: 350 mm

Material: carbon steel

Made in China

4" (102 mm) Replacement stone, 530-0100-0123-М4

Size: 4" (102 mm)

3 pcs set, for Standard engine cylinder hone 530-0100

Made in Taiwan

5 pcs Trim fastener and molding removal set BD905М

Set includes five different sizes and styles of tools that allow easy removal of trim fasteners, moldings and wheel hubs.
Tools are made of plastic to prevent damage to trim, moldings, alloy wheels or vehicle paint.
Can be used on trim fasteners and moldings inside or outside

24mm Oil Filter Wrench For DSG Gear Oil Change, 50845
 
Features: For operation of the oil filter housing cover when changing the oil filter insert on the DSG gearbox.
Applicable: VW and VAG group vehicles.
No removal of batteries or battery holders.
VW specification: DSG oil change within the inspection interval.
Drive: Square, 1/2".
Output: Outside 12-point profile.
Wrench size: 24mm.
Length: 199 mm.

Made in China

2" Cylinder Hone Three arms, 50719

Suitable for small brake cylinders.
With three arms
Stone size: 50 mm
Capacity: ø32 - 88 mm (1-1/4” – 3-1/2”)

Made in China

28 pcs Press and sleeve master kit, 50605

Ideally for silent bearings, hydro bearings, bushings, ball bearings, simmerrings, ect.

Universal use for automobile, truck, municipally, country and forestery technology, ect.

Contents:
4 x step discs
4 x pulling spindle and nuts
8 x thrust bolts M10, M12, M14, M16,
20 x pressure sleeves:
Ø 44x34 mm; Ø 46x36 mm; Ø 48x38 mm;
Ø 50x40 mm; Ø 52x42 mm; Ø 54x44 mm; Ø 56x46 mm; Ø 58x48 mm
Ø 60x50 mm; Ø 62x52 mm; Ø 64x54 mm; Ø 66x56 mm; Ø 68x58 mm
Ø 70x60 mm; Ø 72x62 mm; Ø 74x64 mm; Ø 76x66 mm; Ø 78x68 mm;
Ø 80x70 mm; Ø 82x72 mm

Made in China

5 pcs Trim fastener and molding removal set

Set includes five different sizes and styles of tools that allow easy removal of trim fasteners, moldings and wheel hubs.
Tools are made of plastic to prevent damage to trim, moldings, alloy wheels or vehicle paint.
Can be used on trim fasteners and moldings inside or outside

9 pcs 3/8" & 1/2" Triple square drive tool set S64H5109S

Contents:

7 pcs - 12-pt - 3/8": M4, M5, M6, M8, M10, M12, M14 - L-100 mm

2 pcs - 12 pt. - 1/2": M16, M18 - L-100 mm

Code: 53384