INSTRUMENTS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
M12x2.0 Spindle for Press and Pull Sleeve Kit, 50093-2
M12x2.0 Spindle for Press and Pull Sleeve Kit, 50093-2
Pulling spindle with nuts and thrust bearings.
Size: M12x2.0 mm
Length: 450 mm
Material: carbon steel
Made in China
6 Pcs Torx 1/2" Dr. Impact Socket Set, 50067
6 Pcs Torx 1/2" Dr. Impact Socket Set, 50067
Materal: Cr-Mo steel
Length: 44 mm
Size: T55, T60, T70, T80, T90, T100
Made in China
4 pcs Door service set, 211-0050
4 pcs Door service set, 211-0050
4 pc set: to quickly and efficiently remove doors panels, upholstery, door clips, door windows, windshield molding and more
The door panel disassembly kit contents:
- a tool for removing the door handle,
- two tools for removing the door panels,
- rivet and clip removal tool.
The set has a wide range of applications.Excellent value: an essential tool for the shop or weekend car hobbyist, no need to buy multiple tools - this kit does it all
Made in Taiwan
Seal Puller 50107
Seal Puller 50107
Used to remove oil and grease seals
Two different size tips enables this tool to accommodate most applications.
Made in China
M10x1.5 Spindle for Press and Pull Sleeve Kit, 50093-1
M10x1.5 Spindle for Press and Pull Sleeve Kit, 50093-1
Pulling spindle with nuts and thrust bearings.
Size: M10x1.5 mm
Length: 450 mm
Material: carbon steel
Made in China
3/8" Dr. 30pcs Socket set, 3302
3/8" Dr. 30pcs Socket set, 3302
Contents:
6-pt. Flank sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24 mm
6-pt. Flank deep socket: 8, 9, 10, 12, 13, 14 m
3/8"Dr. 24 teeth Ratchet handle, 80233
3/8"Dr. Universal joint, 80531
3/8"Dr. Extension bars: 75mm, 150mm
3/8"Dr. Spark plug sockets 16, 20.6 mm
Material: Cr-V
Produced by Force, Taiwan
Standard engine cylinder hone 51 - 177 mm, 50723
Standard engine cylinder hone 51 - 177 mm, 50723
• Fast Accurate deglazing of cylinders of 2" to 7" in diameter
• 3, 4" long stone bars, 220 Grit Aluminum Oxide, replaceable
• Adjustable collar to prevent stone breakage and control diameter
• Use with 3/8" or 1/2" everyday portable drill or drill press
• Flexible shaft to tool centering, adjustable tension on stone blades
5 pcs Trim fastener and molding removal set BD905М
5 pcs Trim fastener and molding removal set BD905М
Set includes five different sizes and styles of tools that allow easy removal of trim fasteners, moldings and wheel hubs.
Tools are made of plastic to prevent damage to trim, moldings, alloy wheels or vehicle paint.
Can be used on trim fasteners and moldings inside or outside
Seal Puller, 50108
Seal Puller, 50108
Double Hook with joint for removal of shaft gaskets.
Quick and easy disassembly with 320 mm lever.
Lever adjustable in five positions of up to 45°
Made in China
M18x2.5 Spindle for Press and Pull Sleeve Kit, 50092-5
M18x2.5 Spindle for Press and Pull Sleeve Kit, 50092-5
Pulling spindle with nuts and thrust bearings.
Size: M18x2.5 mm
Length: 350 mm
Material: carbon steel
Made in China
Standard engine cylinder hone 51 - 177 mm, 530-0100
Standard engine cylinder hone 51 - 177 mm, 530-0100
• Fast Accurate deglazing of cylinders of 2" to 7" in diameter
• 3, 4" long stone bars, 220 Grit Aluminum Oxide, replaceable
• Adjustable collar to prevent stone breakage and control diameter
• Use with 3/8" or 1/2" everyday portable drill or drill press
• Flexible shaft to tool centering, adjustable tension on stone blades
Made in Taiwan
5 pcs Trim fastener and molding removal set, 096-5216
5 pcs Trim fastener and molding removal set
Set includes five different sizes and styles of tools that allow easy removal of trim fasteners, moldings and wheel hubs.
Tools are made of plastic to prevent damage to trim, moldings, alloy wheels or vehicle paint.
Can be used on trim fasteners and moldings inside or outside
GM 1.0 / 1.2 12V - Engine Timing Tool Set 51287
GM 1.0 / 1.2 12V - Engine Timing Tool Set 51287
Features: For GM 1.0 12V (3-cylinder), 1.0 12V (3-cylinder) turbo and 1.2 12V (3-cylinder) turbo Ecotec / CSS Prime petrol engines.
Applications:
Chevrolet: Onix 1.0 / 1.0 turbo (2019-), Onix Plus (sedan) 1.0 / 1.0 turbo (2019-), Montana 1.2 turbo (2022-), Tracker 1.0 turbo / 1.2 turbo (2020-)
Buick: Encore GX (2020)
OEM# tools: EN-52457, EN-52458, EN-52476
Made in China
M160x2.5 Spindle for Press and Pull Sleeve Kit, 50092-4
M160x2.5 Spindle for Press and Pull Sleeve Kit, 50092-4
Pulling spindle with nuts and thrust bearings.
Size: M16x2.5 mm
Length: 350 mm
Material: carbon steel
Made in China
3 pcs Universal Impact joints, 50468
3 pcs Universal Impact joints, 50468
Full 360 degree swivel feature allows use to easily access odd angles and hard to reach areas.
Made of heat treated black chrome steel for outstanding durability and durability when working with pneumatic tools.
Material: Cr-Mo
Size: 1/4 "Dr., 3/8" Dr., 1/2 "Dr.
Made in China
