INSTRUMENTS

4 Pcs Truck Diesel Injector Socket Set, 50650

Contains:
1 pc  Hex 32mm x 70mm x 4 teeth (with M14 x 1.5 receiver thread) for Mercedes-Benz, Neoplan and Setra.
1 pc 1/2"Dr. x 72mm x 4 teeth for Mercedes-Benz.
1 pc Hex 32mm x 120mm x 4 tooth for MAN and Mercedes-Benz.
1 pc 1/2"Dr. x 120mm x 3 teeth for MAN and Mercedes-Benz.
Also suitable for some Iveco, Scania and Renault commercial vehicles.

Made in China

14 pcs Special vibro chisel set, 846-5047

A : 74 mm Large Flat Hammer.
B : 63 mm Large Concave Hammer.
C : 38 mm Medium Flat Hammer.
D : 1/2" Dr. Adaptor Hammer.
E : Adaptor Shaft Hammer.
F : 25 mm Hammer.
G : Track Rod Hammer.
H : 7" x 24 mm Impact ball joint separator
I : 7"x 20 mm Impact ball joint separator
J : 20 mm Flat Chisel
K : Point Chisel.
L : 38.5 mm Diameter Body Smoother Hammer.
M : 10 pcs Spare O-Rings
N : Air Hammer

Tools material: Cr-Mo

Made in Taiwan

Door upholstery tack remover HS-E3402

Description:
To removes upholstery clips in just a few seconds.
Place the tool under the edge of door panel & insert in fastener then pry up.

Made in China

11 pcs 1/4" Flank socket set (SAE), S2116-9

Contents:

5/32"; 3/16"; 7/32"; 1/4"; 9/32"; 5/16"; 11/32"; 3/8"; 7/16"; 1/2"; 9/16"

Material: Cr-V

Origin: Pard, Taiwan

Piston Ring Compressor 60-175 mm, 50091

With Safety valve Special spring steel
Ratchet type complete with hex spanner
Capacity: 60-175mm
Height: 150mm (6")

Made in China

1/2”DR. Pin Wrench Socket For Mercedes-Benz M-Class (W163/W164), 846-7037А

Application: For Mercedes Benz ML class W163 until June 2005 and W164 from 2005
To replace hinges on the front and rear axle.
Facilitates loosening and tightening the torque lock nuts with correct torque
Suitable for lower suspension connections on the front and rear axles
• Application: For Mercedes-Benz M-Class hinges (W163 / W164) on the front and rear axles.
• Used to fasten the retaining ring during the replacement of the ball joints.
• Precision fitting.
• Material: Cr-Mo
• Inside Diameter: 52 mm
• Outside Diameter: 63 mm
• H: 32 mm

Made in Taiwan

12 pcs 3/8"Dr. 6-pt. Flank socket set, C3121

Contents: 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 22 mm

Material: Cr-V

MAde in Taiwan

10-25mm Armature Bearing puller 009-00AB

Features:
To disssembly cars bearing
To disassembly electric products bearings
It will not make the hook loose even if you  don't use the fixed screw.
Size specifications:
Disassembly out-wheel capacity: 10-25 mm
Diameter of screw nose: 4 mm
Hook lenght: 40 mm
Highest loading capacity: 0.6 ton
Weight: 0.2 kg

Made in: Taiwan

VAG Cam Chain Tensioner Locking Tool, 058-62237
Compresses the camshaft chain tensioner safely and easily when removing camshafts or replacing the tensioner or its gasket. These tasks are virtually impossible without the correct tool.
The tool threads into the guide, compressing the tensioner, relieving chain tension.
The no-mar plastic contact surface will not harm the tensioner face.
Applicable:
Audi: A4, A6, A8, TT, S4, S6, RS6
Seat: Ibiza, Cordoba, Leon, Toledo, Alhambra
Skoda: Octavia
Volkswagen: Polo, Golf, Jetta, Passat, Beetle, Touareg
Engine Codes: ADR, AEB, AFY, AGN, AGU, AHA, AJE, AJH, AJL, AJP, AJQ, AMB, AMK, AMU, ANB, APB, APG, APH, APP, APT, APU, APX, ARH, ARK, ARX, ARY, ARZ, ATC, ATQ, AUM, AUQ, AVC, AWC, AWM, AWN, AWP, AWT, AWV, AYP, BAM, BBD, BCY, BEA, BEL, BFM, BKF, BNU
OEM №: 3366

Made in Taiwan

3/4”DR. Pin Wrench Socket For Mercedes-Benz M-Class (W163/W164), 846-7037B

Application: For Mercedes Benz ML class W163 until June 2005 and W164 from 2005
To replace hinges on the front and rear axles.
Facilitates loosening and tightening the torque lock nuts with correct torque
Suitable for lower suspension connections on the front and rear axles
• Application: For Mercedes-Benz M-Class hinges (W163 / W164) on the front and rear axles.
• Used to fasten the retaining ring during the replacement of the ball joints.
• Precision fitting.
• Material: Cr-Mo
• Inside Diameter: 52 mm
• Outside Diameter: 63 mm.
• H: 60 mm

Made in Taiwan

Puller with 2 slim legs, 210-04267B

Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel slin legs.
Capacity: 0-45mm
P: 40mm
N.W. 0.350 kgs

Made in Taiwan

Code: 533043

VAG 3.0 / 2.9 TFSI (EA839) - Engine Timing Tool Set, 51039

Features:
Designed to fix the camshafts in position when removing and installing the camshaft timing chains.
Suitable for VAG 6-cylinder 3.0, 2.9 4-valve TFSI (EA839) petrol engines.
Applications:
Audi: A6 (2019-); A7 (2018-); A8 (2019-); Q7 (2019-); Q8 (2019-); S4 (2016-); S5 (2016-); SQ5 (2017-); RS4 (2017-); RS5 (2017-)
VW: Touareg III (2018-)
Engine codes: CWGD; DECA; CZSA; CZSE; DLZA; DCBD; DCBE
OEM No. T40331

Made in China

Benz strut nut socket, 780-9002\

Features:
Specifically designed for Mercedes-Benz C Class W203
Applicable:
Mercedes-Benz C Class 2000-2008 C203 front suspension strut top nuts (Shock absorber piston rod top nut).
Also fits W209 CLK 2003-2008
Used with a 7 mm Hex key to hold strut in place whilst tightening
22 mm Hex drive
Selected steel

Made in Taiwan

2 pc Axle puller, BR66401

- central hole to screw 130mm
- drop forged

Made in Pard, Taiwan