INSTRUMENTS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
Coil spring compressor 5/8" - 11 UNC, 741-0107
Coil spring compressor 5/8" - 11 UNC, 741-0107
Tempered Chrome-molybdenum steel jaws with ACME threaded lead screw quickly & safely compress coil springs on all passenger cars & pick up trucks.
Lenght: 300 mm
Made in Taiwan
9 pcs 3/8"Dr. Star socket set, 3091
9 pcs 3/8"Dr. Star socket set, 3091
Contents: Е4; Е5; Е6; Е7; Е8; Е10; Е11; Е12; Е14
Material: Cr-V
Made in Force, Taiwan
Flare nut wrench 12-13 mm, C7511213
Flare nut wrench 12-13 mm, C7511213
Material: Cr-V
Made in Pard, Taiwan
Valve Spring Compressor Kit, 50590
Valve Spring Compressor Kit, 50590
Designed to remove and install valve springs and valve stem seals without removing cylinder head.
Air pressure helps prevent the valve from falling into the combustion chamber.
Adapters: 23mm, 25mm, 30mm.
Made in China
Universal ball joint separator 22 mm, 211-0163
Universal ball joint separator 22 mm, 211-0163
This tool is used to separate the ball joint from the spindle support arm
Applicable: Audi, BMW, Ford, Honda, Mercedes-Benz, Nissan, Opel, Renault, Seat, Skoda, Toyota, Volkswagen and Volvo.
Adjustable for Different Size Ball Joints
1-1/8" & 2-1/8" (30 - 56 mm) Maximum Opening Capacity
Lifetime limited warranty
10 pcs 1/2" Hex socket bit set, 4111
Ford 1.5L EcoBoost -Engine Timing Tool Set, 50584
Ford 1.5L EcoBoost -Engine Timing Tool Set, 50584
For locking camshaft and flywheel on Ford inline 3-cylinder 1.5L EcoBoost engines.
Application:
Ford Focus (2018-)
Fiesta (2018-)
Escape (2020-)
OEM#: 303-1643, 303-1649
Made in China
Draper Bearing, Seal and Bush Insertion/Extraction Kit (26 piece), 50092A
Draper Bearing, Seal and Bush Insertion/Extraction Kit (26 piece), 50092A
Expert Quality, bearing, seal and bush insertion and extraction kit, perfectly designed to aid with accurate and controlled insertion or removal of a host of different bearings, including normal bearings, silent bearings, hydraulic bearings, rubber bearings, bearing bushes, shaft seals etc.
Each kit comprises of 22 adaptor rings and five fine thread puller bars with hex. nut ends, contents of each kit is the following:
1 x 34mm x 44mm adaptor ring, 1 x 36mm x 46mm adaptor ring, 1 x 38mm x 48mm adaptor ring, 1 x 40mm x 50mm adaptor ring, 1 x 42mm x 52mm adaptor ring, 1 x 44mm x 54mm adaptor ring, 1 x 46mm x 56mm adaptor ring, 1 x 48mm x 58mm adaptor ring, 1 x 50mm x 60mm adaptor ring, 1 x 52mm x 62mm adaptor ring, 1 x 54mm x 64mm adaptor ring, 1 x 56mm x 66mm adaptor ring, 1 x 58mm x 68mm adaptor ring, 1 x 60mm x 70mm adaptor ring, 1 x 62mm x 72mm adaptor ring, 1 x 64mm x 74mm adaptor ring, 1 x 66mm x 76mm adaptor ring, 1 x 68mm x 78mm adaptor ring, 1 x 70mm x 80mm adaptor ring, 1 x 72mm x 82mm adaptor ring, 1 x 75mm x 85mm adaptor ring, 1 x 80mm x 90mm adaptor ring, 1 x M10 pulling spindle, 1 x M12 pulling spindle, 1 x M14 pulling spindle, 1 x M16 pulling spindle.
Made in China
6 pcs 1/4"Dr. Star deep socket set, 2062
6 pcs 1/4"Dr. Star deep socket set, 2062
Contents:
6-Star socket, L-50 mm:
E4; E5; E6; E7; E8; E10
Material: Cr-V
Made in Force, Taiwan
Telescopic Inspection Mirror with LED, 50520
Telescopic Inspection Mirror with LED, 50520
Extends to a maximum length of 880 mm
Mirror size: 42x65 mm
Length: min. 290 – max. 885 mm
Made in China
Code: 5060100
Draper Bearing, Seal and Bush Insertion/Extraction Kit (27 piece), 50092
Draper Bearing, Seal and Bush Insertion/Extraction Kit (27 piece), 50092
Expert Quality, bearing, seal and bush insertion and extraction kit, perfectly designed to aid with accurate and controlled insertion or removal of a host of different bearings, including normal bearings, silent bearings, hydraulic bearings, rubber bearings, bearing bushes, shaft seals etc.
Each kit comprises of 22 adaptor rings and five fine thread puller bars with hex. nut ends, contents of each kit is the following:
1 x 34mm x 44mm adaptor ring, 1 x 36mm x 46mm adaptor ring, 1 x 38mm x 48mm adaptor ring, 1 x 40mm x 50mm adaptor ring, 1 x 42mm x 52mm adaptor ring, 1 x 44mm x 54mm adaptor ring, 1 x 46mm x 56mm adaptor ring, 1 x 48mm x 58mm adaptor ring, 1 x 50mm x 60mm adaptor ring, 1 x 52mm x 62mm adaptor ring, 1 x 54mm x 64mm adaptor ring, 1 x 56mm x 66mm adaptor ring, 1 x 58mm x 68mm adaptor ring, 1 x 60mm x 70mm adaptor ring, 1 x 62mm x 72mm adaptor ring, 1 x 64mm x 74mm adaptor ring, 1 x 66mm x 76mm adaptor ring, 1 x 68mm x 78mm adaptor ring, 1 x 70mm x 80mm adaptor ring, 1 x 72mm x 82mm adaptor ring, 1 x 75mm x 85mm adaptor ring, 1 x 80mm x 90mm adaptor ring, 1 x M10 pulling spindle, 1 x M12 pulling spindle, 1 x M14 pulling spindle, 1 x M16 pulling spindle, 1 x M18 pulling spindle.
The set is in case.
Made in China
6 pcs 1/4"Dr. Star socket set, 2062S
6 pcs 1/4"Dr. Star socket set, 2062S
Contents:
6-Star socket, L-25 mm:
E4; E5; E6; E7; E8; E10
Material: Cr-V
Made in Force, Taiwan
Manual Brake Fluid extractor 50789
Manual Brake Fluid extractor 50789
Drains the brake fluid and bleeds the brake system
Tank capacity: 3l
Max. Pressure: 4.8 Bar (70Psi)
Made in China
6 Pcs Diesel Injector Line Socket Wrench Set, 50471
6 Pcs Diesel Injector Line Socket Wrench Set, 50471
Suitable for dismantling injector lines on most diesel engines
Features: For loosing and tightening nuts and bolts in confined space such as fuel injector connections.
L-type, open ended.
1/2" Dr. 12pt.
Material: Cr-V
Size: 12mm, 14mm, 16mm, 17mm, 18mm, 19mm.
Made in China
Universal ball joint puller, automobile, 23 mm, 50049
Universal ball joint puller, automobile, 23 mm, 50049
Specification:
External clamping width: 23 mm
Clamping depth: 65 mm
Width: 100 mm
Spindle length: 35 mm
Thread dimension: M14 x 1.5
Width across flats: 19 mm
Applicable:
For easy ejection of ball joint bolts, particularly for many cars from the following manufacturers: Audi, BMW, Fiat, Ford, Daimler-Chrysler, Opel/Vauxhall, Nissan, Toyota, VW, Volvo.
Made in China
