INSTRUMENTS

Volvo T6 3.0 & 3.2 - Engine timing tool set, 50817          

Features: For Volvo T6 3.0 & 3.2 Engines             
Fitted to S80, XC60, XC70 & XC90 2007 on           
Designed for checking and adjusting the engine timing               
Fits on Volvo S80, XC90, XC60, XC70 3.0T, 3.2 with T6 engine as of 2007
Includes camshaft and crankshaft locking tool 
Contents:
Camshaft locking tool - OEM 999-7261 
Sprocket removal tool - OEM 999-7263/7264/7272         
Camshaft alignment tool - OEM 999-7257           
Also fits Land Rover 3.2 i6 2006 on          
Camshaft locking tool - OEM 303-1223 
Sprocket removal tool - OEM 303-1225/6
Camshaft alignment tool OEM 303-1219

Made in China

46 pcs 1/4” Dr. Socket set

Material: Cr-V
Contents:
13 pcs 1/4"Dr. 6-pt: - 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm
1 pc Quick-Release, 72-Tooth Ratchet handle
2 pcs Extension bar: 50 mm, 100 mm
1 pc Flexible Shaft Attachment  - 150 mm
1 pc 1/4" Dr, Spinner handle L 150 mm ...

11 pcs Universal Clutch Alignment Tool Kit, 50808

Suitable for a wide range of vehicle including some light commercial vehicles. Screw action provides fast adjustment for required hub diameter. Eight interchangeable spigot adaptors aid close alignment.
Contents:
3 pcs Expanding mandrels: Ø15 - 19mm, Ø20 - 26mm, Ø23 - 36mm
8 pcs Centring bushes: 12, 14, 15, 16, 17, 18, 19 and 20mm (O/D)

Made in China

VAG 1.4 TSI Auxiliary Belt Tensioner Spanner, 50775

Specially designed spanner to allow for access to the auxiliary belt tensioner where access is limited
Used for loosening poly V-belt by turning auxiliary belt tensioner.
Jaw opening: 16mm.
Application: Audi, Seat, Škoda and Volkswagen with 1.4 TSI and TSi Blue Motion engines(1.4L 4-cylinder direct injection engine, turbocharger and supercharger).
Applicable to: Audi: A1 Sport back / 12-15 | A3 / 13-15 | A3 Sport back / 12-15.
Engine Codes : ACT | CPTA | CGGA | CHPA | CMBA | CPTA | CPVA | CRJA | CXSA
OEM No.: T10447

Made in China

Injector Seat and Shaft Cleaning Tool Kit, 50883

It contains a set of tools that ensure effective cleaning of the injector hole and the surface of the bed before inserting the new nozzle. It is used in a wide range of vehicles.
Suitable for Fiat Citroen BMW Peugeot Renault and Mercedes-Benz
Includes:
4 pcs cleaning brushes, brush holder, 3 pcs injector seat mill, cutter guide, sealing ring puller, brush holder extension injector seat and shaft cleaning kit, Note: only use brushes clockwise.
3 pcs conical sleeves for the guide pin 17 / 18.4 / 19 mm.
Guide bolts for sealing seat mills with 19 mm external hexagon head.
3 pcs milling heads:
15 x 19 mm diameter - Mercedes CDI
17 x 17 mm diameter - BMW, Peugeot, Citroen, Renault for Delphi / Bosch injectors
17 x 17 mm diameter 30° bevelled -  Fiat and Iveco sealing ring extractor.
Joint shaft with 6.3 mm (1/4 inch) hex bit holder for drill holders, for brushes with 6.3 mm (1/4 inch) hex bit holder.
2pcs  brush heads with 19.5 mm diameter, 2 pcs long, thin brushes for nozzle needle shaft.
6 pcs guide plugs for closing the nozzle needle shaft with holder for removal and installation.

Made in China

Clutch Alignment Mandrels, 50681

Suitable for cars and light commercial vehicles.
Fast hub diameter adjustment achieved via screw action.
Adjustable from 15-19mm and 20-26mm diameter.

Made in China

Air Conditioning Compressor Clutch Puller Set, 50677

Features:
Professional A/C Compressor Clutch Remover Kit.
Replaces clutches found on FS6, C171, 6P & 148 compressors GM R4 & A6, HR-6, DA-6 & V5 A/C compressors.
Sanden compressors SD505, 507, 510, 575, 708 & 709.
2 & 3 hole puller plate fits most clutches, mechanical force does the pulling.

Made in China

VAG - Timing Belt Tensioner Wrench, 50669

For adjusting the timing belt at the tensioner roller.
Suitable for Audi, Volkswagen, Seat, Škoda vehicles.
Distance of pins: 18 mm
Pin diameter: 3mm
OEM#: 3387

Made in China

8 pcs 1/2"Dr. Impact hex bits socket  (one piece), 30008B

Size: HEX 5, 6, 8, 10, 12, 14, 17, 19

Material: CR-MO

Made in China

VAG - Turbo Actuator Adjustment Set, 50751

This tool set is designed for the professional loosening, adjustment and tightening of the control rod when removing/installing the pressure capsule along with the charge pressure actuator position sensor on VAG 2.0L Common Rail Diesel engines.
Application:
Golf Ml V1 (2008 - 2013), Golf Plus (2004 - 2015), Jetta (2004 - 2010), Passat (2005 - 2010), Passat CC (2008 - 2012), Scirocco (2008 - 2017), EOS (2006 - 2015), Tiguan (2007 - 2018), Transporter T5 (from 2009).
Set contains:
1 Pc 1/4" Dr. Socket 10mm, OEM T10422
1 Pc 12pt Spanner 10 x12mm, OEM T10423

Made in China

60 - 80mm Reversible Oil Filter Wrench, 50666

Features:
2 jaws with teeth provide a strong grip and are not easy to slide. The wrench can hold half of the filter for greater grip and reduce the risk of sliding if the filter is stubborn or damaged.
Reduce time-consuming disassembly and stubborn filter disassembly. Spring-loaded for easy installation and disassembly.
Is used with half bending rod or ratchet wrench.
Rigid high carbon steel with a spring that has strong elasticity and is durable..
Specification:
Special design allows the oil filter to be removed and installed quickly and easily.
Steel jaws securely grip oil filter without slipping.
Fits sizes 60mm - 80mm.
Use with 1/2" drive.
Reversible.

Made in China

9 pcs 1/2"Dr Torx impact bits socket set, 30009B

Size: Т20, Т25, Т30, Т40, Т45, Т50, Т55, Т60, Т70

Material: CR-MO

Made in China

BMW N-series Crankshaft Locking Tool, 50575

Used to lock crankshaft when releasing or tightening the central bolt.
Suitable for BMW N12, N14, N40, N42, N45, N46, N52, N52, N53, N54 engines.
OEM#: 11 9 280

Made in China

9 pcs 1/2"Dr Spline Impact bits socket (one piece), 30009

Spline size: М4, М5, М6, М8, М9, М10, М12, М14, М16

Material: CR-MO

Made in China ...