INSTRUMENTS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
Coil spring compressor , 62701
VAG 1.4 TSI Auxiliary Belt Tensioner Spanner, 50775
VAG 1.4 TSI Auxiliary Belt Tensioner Spanner, 50775
Specially designed spanner to allow for access to the auxiliary belt tensioner where access is limited
Used for loosening poly V-belt by turning auxiliary belt tensioner.
Jaw opening: 16mm.
Application: Audi, Seat, Škoda and Volkswagen with 1.4 TSI and TSi Blue Motion engines(1.4L 4-cylinder direct injection engine, turbocharger and supercharger).
Applicable to: Audi: A1 Sport back / 12-15 | A3 / 13-15 | A3 Sport back / 12-15.
Engine Codes : ACT | CPTA | CGGA | CHPA | CMBA | CPTA | CPVA | CRJA | CXSA
OEM No.: T10447
Made in China
46 pcs 1/4” Dr. Socket set, 10046
46 pcs 1/4” Dr. Socket set
Material: Cr-V
Contents:
13 pcs 1/4"Dr. 6-pt: - 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm
1 pc Quick-Release, 72-Tooth Ratchet handle
2 pcs Extension bar: 50 mm, 100 mm
1 pc Flexible Shaft Attachment - 150 mm
1 pc 1/4" Dr, Spinner handle L 150 mm ...
4 pcs Stud extractor socket set, 058-1022M
4 pcs Stud extractor socket set, 058-1022M
The extractors are the concentric roller bearing type that won't damage the thread on the stud.
They can used for stud removal and stud fitting with no damage to the thread.
Very professional.
Made from highly polished chrome vanadium steel to a professional standard for the skilled mechanic or engineer.
Sizes: 6 mm; 8 mm; 10 mm; 12 mm
Made in Taiwan
M16x2.0 Thread repair set, 50725P
M16x2.0 Thread repair set, 50725P
Features: This thread repair kit creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads. Protects tapped threads against wear and damage.
Set includes drill bit, thread tap, insert installations (heli-coil - 10 pcs) and lug breaking tool.
Size: 14x1.5
Made in China
Clutch Alignment Mandrels, 50681
Clutch Alignment Mandrels, 50681
Suitable for cars and light commercial vehicles.
Fast hub diameter adjustment achieved via screw action.
Adjustable from 15-19mm and 20-26mm diameter.
Made in China
13-38 mm 3-Jaw Internal Bearing Puller, 51178
13-38 mm 3-Jaw Internal Bearing Puller, 51178
Forged and Heat Treated Steel Jaws
Three Jaw Design Applies Even Pressure Preventing Damage to Bearings
Corrosion-Resistant Black Oxide Finish
Applications include cars, trucks, motorcycles, bicycles, tractors etc.
Ideal for: Automotive flywheel, Motorcycle and Bicycle wheel, Pump bearing, generator bearing, Machine bearing etc.
Internal diameter range: 13-38mm.
Made in China
Air Conditioning Compressor Clutch Puller Set, 50677
Air Conditioning Compressor Clutch Puller Set, 50677
Features:
Professional A/C Compressor Clutch Remover Kit.
Replaces clutches found on FS6, C171, 6P & 148 compressors GM R4 & A6, HR-6, DA-6 & V5 A/C compressors.
Sanden compressors SD505, 507, 510, 575, 708 & 709.
2 & 3 hole puller plate fits most clutches, mechanical force does the pulling.
Made in China
VAG - Timing Belt Tensioner Wrench, 50669
VAG - Timing Belt Tensioner Wrench, 50669
For adjusting the timing belt at the tensioner roller.
Suitable for Audi, Volkswagen, Seat, Škoda vehicles.
Distance of pins: 18 mm
Pin diameter: 3mm
OEM#: 3387
Made in China
60 - 80mm Reversible Oil Filter Wrench, 50666
60 - 80mm Reversible Oil Filter Wrench, 50666
Features:
2 jaws with teeth provide a strong grip and are not easy to slide. The wrench can hold half of the filter for greater grip and reduce the risk of sliding if the filter is stubborn or damaged.
Reduce time-consuming disassembly and stubborn filter disassembly. Spring-loaded for easy installation and disassembly.
Is used with half bending rod or ratchet wrench.
Rigid high carbon steel with a spring that has strong elasticity and is durable..
Specification:
Special design allows the oil filter to be removed and installed quickly and easily.
Steel jaws securely grip oil filter without slipping.
Fits sizes 60mm - 80mm.
Use with 1/2" drive.
Reversible.
Made in China
BMW N-series Crankshaft Locking Tool, 50575
BMW N-series Crankshaft Locking Tool, 50575
Used to lock crankshaft when releasing or tightening the central bolt.
Suitable for BMW N12, N14, N40, N42, N45, N46, N52, N52, N53, N54 engines.
OEM#: 11 9 280
Made in China
8 pcs 1/2"Dr. Impact hex bits socket (one piece), 30008B
8 pcs 1/2"Dr. Impact hex bits socket (one piece), 30008B
Size: HEX 5, 6, 8, 10, 12, 14, 17, 19
Material: CR-MO
Made in China
Combustion Gas Leak Tester Kit, 51111
Combustion Gas Leak Tester Kit, 51111
Designed for testing the presence of CO² in the cooling system.
CO² in the cooling system can indicate a cylinder head gasket leak, cracked block, warped head, etc.
For use on water-cooled petrol and diesel engines.
Set contains:
1x Leak Detector
1x Rubber Bulb Pump
1x Release Valve and Connector
3x Cooling System Bayonet Adapter
2x Empty Bottle (250 ml)
Made in China
BMW N20/N26 Flywheel Locking Tool, 50570
BMW N20/N26 Flywheel Locking Tool, 50570
Description:
Great for Replacing The Timing Chain.
Works on BMW N20 and N26 engines.
Used for securing the crankshaft with the transmission installed(connected to engine)
Comparable to BMW Factory Tool No. 83302222742
(Note: Automatic transmissions only.)
Features:
While replacing the timing chain, this tool can hold the flywheel;
It helps to release and tighten down the central bolts on the vibration damper.
Application:
BMW 125i N20 2012-2017;
BMW 220i N20 2014-2018
BMW 225i N20 2014-2017
BMW 228i N20 2014-2016
BMW 320i N20 2012-2015
BMW 320i GT N20 2013-2016
BMW 328i N20 2011-2016
BMW 328i GT N20 2013-2016
BMW 520i N20 2011-2016
BMW 520Li N20 2013-2016
BMW 525Li N20 2013-2016
BMW 528i N20 2011-2017
BMW X1 xDrive/sDrive20i N20 2011-2015
BMW X1 xDrive/sDrive28i N20 2011-2015
BMW X3 N20 2013-2018
BMW X3 xDrive20i N20 2011-2018
BMW X3 xDrive28i N20 2012-2018
BMW X4 xDrive20i N20 2014-2017
BMW Z4 N20 2013-2015
BMW Z4 sDrive20i N20 2011-2016
BMW Z4 sDrive28i N20 2011-2016
BMW 328i / 328iX N26 2012-2016
BMW 228i / 228iX N26 2012-2016
Made in China
Front axle upper ball joint extractor installer VW T4, 50463
Front axle upper ball joint extractor installer VW T4, 50463
Suitable for removing and installing the upper front ball joint in situation without the need to disassemble.
Features a variety of adaptors used in different combinations for extracting and installing.
Applicable: VW; T4 2000 CC, T4 2500 CC
Made in China
