INSTRUMENTS

Ford Transit 2.0TDCi - 32mm Diesel Fuel Filter Socket, 50980

Features: Used for remove and install th fuel filter on Ford EcoBlue 2.0 TDCi diesel engines from 2016. Cut out in the socket clears the fuel drain valve.
Size: 1/2"Dr.; 32 mm 6-pt.
Material: Cr-V (Chrome Vanadium)
Application:
Ford Transit Custom MK8 2.0TDCi 2016 onwards.

Made in China

23 Pcs Terminal Release Tool Kit, 50945

Allows users to easily remove terminals from electrical connectors.
Eliminates damage to wires or to terminal blocks.
Handles designed for extra grip and comfort.
Applicable for most vehicles.

Application:
No. 1: for BMW, Mercedes, Opel, VW/ Audi
No. 2: for BMW, Jaguar, Mercedes, Porsche, Saab, Seat, Skoda
No. 3: for BMW, Mercedes, Opel, Porsche, VW/ Audi
No. 4: for Ford
No. 5: for BMW, Ford, Mercedes, Opel, Porsche, Seat, Skoda, VW/ Audi
No. 6: for BMW, Ford, Jaguar, Mercedes, Opel, Porsche, Saab, Seat, Skoda, VW/Audi
No. 7: for Mercedes
No. 8: for Ford, Jaguar, Mercedes, Opel, Porsche, VW/Audi
No. 9: for Ford, Mercedes
No. 10: for Mercedes
No. 11: for BMW, Ford, Jaguar, Mercedes, Opel, Porsche, Saab, Seat, Skoda, VW/Audi
No. 12: for Opel, Renault, Skoda, VW/Audi
No. 13: for Ford, Mercedes
No. 14: for Ford, Jaguar, Porsche
No. 15: for BMW, Ford, Mercedes, Opel, Seat, Skoda, VW/Audi
No. 16: for BMW, Ford, Jaguar, Mercedes, Opel, Porsche, VW/Audi
No. 17: for BMW
No. 18: for Mercedes
No.19: for Citroen, Chrysler, Fiat, Ford, Honda, Mazda, Mercedes, Mitsubishi, Opel, Porsche, Renault, Seat, Toyota, VW/Audi
No. 20: for Ford
No. 21: for BMW, Ford, Jaguar, Mercedes, Opel, Porsche, Saab, Seat, Skoda, VW/Audi
No. 22: for Honda, Opel, Toyota, VW/Audi
No. 23: for Opel, VW/Audi

Made in China

Volvo T6 3.0 & 3.2 - Engine timing tool set, 50817          

Features: For Volvo T6 3.0 & 3.2 Engines             
Fitted to S80, XC60, XC70 & XC90 2007 on           
Designed for checking and adjusting the engine timing               
Fits on Volvo S80, XC90, XC60, XC70 3.0T, 3.2 with T6 engine as of 2007
Includes camshaft and crankshaft locking tool 
Contents:
Camshaft locking tool - OEM 999-7261 
Sprocket removal tool - OEM 999-7263/7264/7272         
Camshaft alignment tool - OEM 999-7257           
Also fits Land Rover 3.2 i6 2006 on          
Camshaft locking tool - OEM 303-1223 
Sprocket removal tool - OEM 303-1225/6
Camshaft alignment tool OEM 303-1219

Made in China

11 pcs Universal Clutch Alignment Tool Kit, 50808

Suitable for a wide range of vehicle including some light commercial vehicles. Screw action provides fast adjustment for required hub diameter. Eight interchangeable spigot adaptors aid close alignment.
Contents:
3 pcs Expanding mandrels: Ø15 - 19mm, Ø20 - 26mm, Ø23 - 36mm
8 pcs Centring bushes: 12, 14, 15, 16, 17, 18, 19 and 20mm (O/D)

Made in China

VAG 1.4 TSI Auxiliary Belt Tensioner Spanner, 50775

Specially designed spanner to allow for access to the auxiliary belt tensioner where access is limited
Used for loosening poly V-belt by turning auxiliary belt tensioner.
Jaw opening: 16mm.
Application: Audi, Seat, Škoda and Volkswagen with 1.4 TSI and TSi Blue Motion engines(1.4L 4-cylinder direct injection engine, turbocharger and supercharger).
Applicable to: Audi: A1 Sport back / 12-15 | A3 / 13-15 | A3 Sport back / 12-15.
Engine Codes : ACT | CPTA | CGGA | CHPA | CMBA | CPTA | CPVA | CRJA | CXSA
OEM No.: T10447

Made in China

8 pcs 1/2"Dr. Impact hex bits socket  (one piece), 30008B

Size: HEX 5, 6, 8, 10, 12, 14, 17, 19

Material: CR-MO

Made in China

Clutch Alignment Mandrels, 50681

Suitable for cars and light commercial vehicles.
Fast hub diameter adjustment achieved via screw action.
Adjustable from 15-19mm and 20-26mm diameter.

Made in China

9 pcs 1/2"Dr Torx impact bits socket set, 30009B

Size: Т20, Т25, Т30, Т40, Т45, Т50, Т55, Т60, Т70

Material: CR-MO

Made in China

Air Conditioning Compressor Clutch Puller Set, 50677

Features:
Professional A/C Compressor Clutch Remover Kit.
Replaces clutches found on FS6, C171, 6P & 148 compressors GM R4 & A6, HR-6, DA-6 & V5 A/C compressors.
Sanden compressors SD505, 507, 510, 575, 708 & 709.
2 & 3 hole puller plate fits most clutches, mechanical force does the pulling.

Made in China

Front axle upper ball joint extractor installer VW T4, 50463

Suitable for removing and installing the upper front ball joint in situation without the need to disassemble.
Features a variety of adaptors used in different combinations for extracting and installing.

Applicable: VW; T4 2000 CC, T4 2500 CC

Made in China

9 pcs 1/2"Dr Spline Impact bits socket (one piece), 30009

Spline size: М4, М5, М6, М8, М9, М10, М12, М14, М16

Material: CR-MO

Made in China ...

4 pcs Stud extractor socket set, 058-1022M
The extractors are the concentric roller bearing type that won't damage the thread on the stud.
They can used for stud removal and stud fitting with no damage to the thread.
Very professional.
Made from highly polished chrome vanadium steel to a professional standard for the skilled mechanic or engineer.
Sizes: 6 mm; 8 mm; 10 mm; 12 mm

Made in Taiwan

M16x2.0 Thread repair set, 50725P

Features: This thread repair kit creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads. Protects tapped threads against wear and damage.
Set includes drill bit, thread tap, insert installations (heli-coil - 10 pcs) and lug breaking tool.
Size: 14x1.5

Made in China

VAG - Timing Belt Tensioner Wrench, 50669

For adjusting the timing belt at the tensioner roller.
Suitable for Audi, Volkswagen, Seat, Škoda vehicles.
Distance of pins: 18 mm
Pin diameter: 3mm
OEM#: 3387

Made in China

9 pcs 1/2"Dr Ribe impact bits socket set, 30009A

Spline size: M5, M6, M7, M8, M9, M10, M12, M13, M14

Material: CR-MO

Made in China ...