INSTRUMENTS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
20 pcs Offset feeler gauge, 9420391
20 pcs Offset feeler gauge, 9420391
Capacity: 0.05 - 1.00 mm
Blades: 100 mmL х 10 mmW
Mаde in China
20 pcs Offset feeler gauge, 61801
20 pcs Offset feeler gauge, 61801
Capacity: 0.05 - 1.00 mm
Blades: 100 mmL х 10 mmW
Made in Taiwan
VAG (4.0 TFSI) - Timing Tool Set, 50956
VAG (4.0 TFSI) - Timing Tool Set, 50956
Use for correct the camshaft and crankshaft timing position. Use to lock the camshaft in the timed position when the engine repair or the rebuild requiring the cam pulley to be removed and timed. For locking the camshaft in the position to allow the variable valve timing pulley to be removed.
The kit covers later duratec petrol engine, it includes revised design camshaft setting plate and tensioner pulley locking pin.
Contents:
Tensioner Pulley Locking Pin
Crankshaft Locking Tool
Camshaft Sprocket Locking Tool
Flywheel Timing Pin
Camshaft/Crankshaft Pin
Application:
Audi A8 2010>, Audi A6 2011>8-cyl. 4.0L, 4V TFSI engines.
OEM №: T40264
Made in China
Valve core remover tool, 50987
Tire Valve Core Removal Tool, 50987
Ideal for fast removal and installation of core without damage from a wheel valve.
Robust Steel Shaft with corrosion resistant plating and durable plastic handle.
Suitable for motorcycles, cars, bikes and commercial vehicles.
Lenght: 170mm
Made in China
Mercedes M177/M178 - Engine Timing Tools Set, 50912
Mercedes M177/M178 - Engine Timing Tools Set, 50912
Features:
To fix and align the camshaft in TDC position.
Applicable: BENZ AMG C63, C63S biturbo 4.0L, V8 petrol engine.
Applicable:
Mercedes-Benz G 500 (W463) (2015-2017)
Mercedes-Benz S 560 Coupé (C217) (2017-2020)
Mercedes-Benz S 560 Cabriolet (A 217) 2017-2020
Mercedes-Benz S 560 (W/V222) 2017-2020
Mercedes-Benz GLE 580 (V167) 2019-
Mercedes-Benz GLS 580 (X167) 2019-
Mercedes-Benz S 580 (W/V223) 2021-
Mercedes-Benz C 63 AMG (W/S/C/A 205) 2015-
Mercedes-Benz GLC 63 AMG (X253) 2017-
Mercedes-Benz E 63 AMG (W213) 2017-
Mercedes-Benz GLE 63 (V167/C167) 2020-
Mercedes-Benz GT 63 AMG (X290) 2018-
Mercedes-Benz G 63 AMG (W463) 2018-
Mercedes-Benz E 63 S AMG (W213) 2017-
Mercedes-Benz S 63 AMG (V222) 2017-2020
Mercedes-Benz S 63 Coupe AMG (C217) 2017-2020
Mercedes-Benz GLS 63 AMG (X167) 2020-
Mercedes-Benz GLE 63 S AMG (V167/C167) 2020-
Mercedes-Benz GT 63 S AMG (X290) 2018-
Mercedes-Benz GT AMG (C190) 2017-
Mercedes-Benz GT S AMG (C190) 2015-2020
Mercedes-Benz GT AMG (C190) 2020-
Mercedes-Benz GT R AMG (C190) 2017-
Mercedes-Benz-Maybach S 580 (Z223) 2021-
Mercedes-Benz-Maybach S 560 (X 222) 2017-2020
Aston Martin Vantage AMR 2019-
Aston Martin Vantage V8 Coupé 2017-
Aston Martin Vantage V8 Roadster 2020-
Aston Martin DB11 Coupé V8 2017-
Aston Martin DB11 Roadster V8 2018-
Aston Martin DBX 2020-
Applicable engine: M177, M178 from 2015.
OEM №: 177589014000, 177589001500
Made in China
Citroen/Peugeot/Toyota 1.0, 1.2 Petrol Engines - Crankshaft Holding Tool, 50911
Citroen/Peugeot/Toyota 1.0, 1.2 Petrol Engines - Crankshaft Holding Tool, 50911
Description:
Designed to counter-hold the crankshaft pulley to release and tighten the centre bolt.
Applicable: 1.0 and 1.2 Citroen, Peugeot Toyota and GM engines
Made in China
Plastic Rivet Clip Removal Plier, 50944
Plastic Rivet Clip Removal Plier, 50944
Designed to remove reusable two-part plastic rivets, such as those used on plastic trims or door trims.
The head can be adjusted from 0° - 90° to achieve the correct angle to extract the centre locking clip.
Length: 230mm.
Steel construction.
Dipped handles.
Made in China
Honda/Acura - Crankshaft Pulley Holder, 50749
Honda/Acura - Crankshaft Pulley Holder, 50749
Features: For holding the crankshaft pulley when loosening/tightening the crankshaft bolt on most Honda and Acura engines.
Use with 1/2" drive breaker bar.
Size: 50mm Hex
Material: Cr-Mo
Applicable: Honda and Acura 4 cylinder models and V6 engines manufactured after 1990.
1990, 91, 92, 93, 94, 95, 96, 97, 98, 99, 00, 01, 02, 03, 04, 05 and newer Honda Accord 2.2 L 4 cyl.
1996 - newer Honda Accord 2.7 L V-6
1998 - newer Honda Accord 2.3 L 4 cyl. & 3.0 L V-6
1992 - newer Honda Civic 1.6 L 4 cyl.
1997 - newer Honda CR-V 2.0 L 4 cyl.
1993 - newer Honda Del Sol 1.6 L 4 cyl. (except SI w/o hexagonal slot)
2000 - newer Honda Insight 1.0 L 3 cyl.
1995 - newer Honda Odyssey 2.2 L 4 cyl.
1998 - newer Honda Odyssey 2.3 L 4 cyl.
1999 - newer Honda Odyssey 3.5 L V-6
2003 - newer Honda Pilot 3.0 L V-6 and 3.5 L V-6
1992 - newer Honda Prelude 2.2 L 4 cyl.
1992 - newer Honda Prelude 2.3 L 4 cyl.
2000 - newer Honda S2000 2.0 L 4 cyl.
1997 - newer Acura CL 2.2 L 4 cyl.
1997 - newer Acura CL 3.0 L V-6
1998 - newer Acura CL 2.3 L 4 cyl.
2000 - newer Acura CL 3.2 L V-6
1990 - newer Acura Integra 1.6 L 4 cyl. with Auto Trans.
1992 - newer Acura Integra 1.7 L 4 cyl. with Auto Trans.
1993 - newer Acura Integra 1.8 L 4 cyl. with Auto Trans.
1991 - newer Acura Legend 3.2 L V-6 with Auto Trans.
1996 - newer Acura RL 3.5 L V-6
1995 - newer Acura TL 3.2 L V-6
Made in China
2 Pcs Wire Terminal Removal Tool, 50923
2 Pcs Wire Terminal Removal Tool, 50923
Designed to remove wire terminals from terminal blocks without damage.
Provide 12 different tool styles fit most common connectors.
Grey tool removes wires from terminals and red tool designed for Pack-Con and Weather-Pack terminals on GM C3 systems and retrieval of trouble codes from engine computer on some GM vehicles.
Made in China
VAG 1.2, 1.4 TSI - Engine Timing Tool Kit, 50623
VAG 1.2, 1.4 TSI - Engine Timing Tool Kit, 50623
Two piece kit consisting of the components required to lock the crankshaft and camshafts in their timed positions to allow the removal and replacement of the camshaft timing belt.
Application for late 1.2 & 1.4 TSI 4-cylinder, petrol engines
Applicable:
Audi A1, A3, Q3 от 2012 from 2012 onwards
Engine code:
1,2 TFSI: CJZA, CYVB
1,4 TFSI: CHPB, CMBA, CPWA, CUKB, CVNA, CXSA, CXSB, CYVB, CZCA, CZCC, CZDA, CZDB
Volkswagen Golf VII, Passat, SV, Sportsvan, Polo, Jetta от 2012 from 2012 onwards
Engine code:
1,2 TSI: CJZA, CJZB, CJZC, CJZD, CYVA, CYVB, CYVD
1,4 TSI: CHPA, CMBA, CPVA, CPVB, CPWA, CRJA, CUKB, CUKC, CXSA, CZCA, CZDA, CZDB
Seat, Leon, Leon ST от 2012 from 2012 onwards
Engine code:
1,2 TFSI: CJZA, CJZB, CJZC, CJZD, CYVA, CYVB
1,4 TSI/TGI: CHPA, CMBA, CPWA, CXSA, CZCA, CZDA
Skoda Octavia III, Fabia III от 2012 from 2012 onwards
Engine code:
1,2 TSI: CJZA, CJZB, CJZC, CJZD, CYVA, CYVB
1,4 TSI: CHPA, CPWA, CZCA, CZDA
OEM №: T10494; T10340
Made in China
PCD Gauge, 50918
PCD Gauge, 50918
For measurements the hole circle on steel and aluminum rims.
Greatly facilitates the determination of the hole circle.
Suitable for 4, 5, 6 and 8 lug rims.
4-Lug: PCD 4x98mm, 4x100mm, 4x108mm, 4x110mm, 4x120mm, 4x130mm, 4x140mm, 4x4.5"
5-Lug: PCD 5x100mm, 5x108mm, 5x112mm, 5x115mm, 5x120mm, 5x130mm, 5x135mm, 5x150mm, 5x4.5", 5x4.75", 5x5.0", 5x5.5"
6-Lug: PCD 6x135mm, 6x4.5", 6x5.0", 6x5.5"
8-Lug: PCD 8x170mm, 8x6.5"
Made in China
Oil Filter Chain Wrench, 50568
Oil Filter Chain Wrench, 50568
Double chain with spring locking mechanism for added security.
Swivel handle enables to work in narrow spaces.
Suitable for all types of oil filters.
Chain length: 520mm.
Capacity: Ø60-160mm.
Chain width approx. 22 mm
180° swivel handle
Surface finish: Satin chrome plated
Gross weight: 930 g
Made in China
Ford Mazda Cx-7 - Crankshaft Locking Tool Set, 50550
Ford Mazda Cx-7 - Crankshaft Locking Tool Set, 50550
Contents:
Crankshaft locking pin Mazda 6
Camshaft locking plate
Alignment tool
Application:
Mazda CX-7 (L3 turbo engine, 2.3L)
Ford Mondeo / 2001 (10/2000 - 02/2007) vehicles with:
1.8L Duratec-HE (MI4) Petrol,
1.8L Duratec-SCi (MI4) Petrol,
2.0L Duratec-HE petrol engines (MI4) Petrol.
OEM №: 303-1060, 303-1061; 49 UN30 310610, 303-507; 49 JE01 061
Made in China
M8x1.0 Thread repair set , 50725M
M8x1.0 Thread repair set , 50725M
Features:
This thread repair kit creates a stronger internal thread in soft metals. Ideal for repairing damaged or stripped internal threads.
Protects tapped threads against wear and damage.
Set includes drill bit, thread tap, insert installations (heli-coil - 10 pcs) and lug breaking tool.
Size: 8x1.0
Made in China
Mercedes M282 – Timing tool set, 50542
Mercedes M282 – Timing tool set, 50542
Features: For changing the timing chain and setting the timing for:
Mercedes A-class W177 A200
Mercedes B-class W47 B180, B200
Renault / Dacia / Nissan with TCe turbo engines
M282.914 / H5F / H5H / HRA2
Made in China
