INSTRUMENTS

1/2" Dr. Metal socket holder, 659-443216

L: 432 mm - 16 Pcs

Material: Steel

Made in Taiwan

Snap ring pliers (external straight tip 1.8 mm), 60907SO

Capacity: 19 - 60 mm

Made in: Taiwan, Pard

Tackle tough jobs with confidence using our 3/4" Drive E-Torx Deep Impact Socket E24. This socket is engineered for demanding applications, providing exceptional strength and durability.

Key Features:

• 3/4" Drive: Delivers high torque for heavy-duty tasks.
• E24 Torx Size: Specifically designed for E24 Torx fasteners.
• Deep Socket Design: Allows access to fasteners in recessed areas.
• Impact Rated: Constructed from high-strength steel to withstand the forces of impact wrenches.

Built to last and perform, this impact socket is a must-have for any professional or serious DIYer.

21 Pcs 1/4" Drive Torque Wrench Set 1 - 25Nm, 51278

Ideal for precise screws and nuts installation.

Sockets material: Cr-V steel
Bits material: S2 steel
Torque range: 1 - 25Nm (0.7 - 18.5lbf-ft).
Scale: 0.2Nm / 0.15lbf-ft.
Accuracy: ±3%.
Drive Square Size: 1/4"
Contains:
Torque Wrench 1 - 25Nm, 72 teeth
Universal Joint
Extension Bar 100mm
Adapter 1/4"F x 3/8"M
17x Bit Sockets1/4”Dr:
Phillips: PH1, PH2, PH3
Hex (37mm): H2, H2.5, H3, H4, H5, H6, H8, H10
Hex (62mm): H5
Torx (37mm Length): T10, T15, T20, T25, T30

Made in China

Hydraulic Drive Shaft Remover/Press Set, 50127

Used to press drive shafts out of wheel hubs.
For 4 or 5 bolt hubs with the centerline of the bolts mounted in a 98-125 mm diameter circle.
Especially for glued and rusty drive shafts.
Has a 10 ton capacity.

Applicable: VW, Audi, Seat, Skoda, Opel, Volvo, Fiat, Renault, Peugeot, Citroen and more.

Made in China

Mini 2 Way Pull Clamp, 51163

Bolt size M12×70 mm
Claw width: 38 mm
Overal length: 170 mm
Single way pulling max: 2 t
Side way pulling max: 1 t
Weight: 1.100 kgs

Made in China

The VAG 3-Pin Brake Piston Wind Back Tool 50161 is an indispensable tool for servicing rear brake calipers on VAG models with an electronic park brake. After retracting the electronic park brake mechanism (software controlled), use this adapter with a wind back tool to reset caliper pistons for new pad installation.

Key Features:

• Essential for VAG models with electronic park brakes.
• 3/8"Dr. and two pin drive option for flexibility.
• Compatible with Renault Megane, Scenic, and Volvo models.
• Outside diameter: 39mm.

24” (605 mm) Magnetic tool holder, 50246-24

Convenient organizer for various tools as screwdriver, ratchet, hammer etc.
Screw and fasten on the wall.
Length: 605 mm (24 ”)

Made in China

Snap ring pliers (external 90° bent tip 1.3 mm), 60905ABO

Made im: Taiwan, Force

Capacity: 8-25 mm

The Smoke Leak Detector Kit is your ultimate solution for quickly and accurately locating those elusive, hidden leaks in automotive systems. Designed for professional use and DIY enthusiasts, this tool generates safe smoke under low pressure, making even the smallest leaks visible that would otherwise be impossible to detect.

Key Features:

• Wide Application: Works seamlessly with intake, exhaust, and fuel systems (non-direct injection), as well as turbochargers, intercoolers, EGR valves, and vacuum hoses.
• Built-in Pressure Gauge: Easily monitor system pressure during testing for precise diagnostics.
• Dual Operating Modes:
  • Air Mode: Pressurize the system to identify pressure drops efficiently.
  • Smoke Mode: Generate smoke to visually pinpoint the exact location of leaks.
• User-Friendly Design: Compact and equipped with a convenient hanging hook for easy use in the engine bay.
• 12V Power Supply: Simply connect to a standard 12V vehicle battery for operation.

Advantages:

• Fast and accurate detection of leaks.
• Saves valuable time and money on troubleshooting.
• An essential tool for automotive workshops and dedicated enthusiasts alike.

Don't waste any more time guessing—get your Smoke Leak Detector Kit today and find leaks with ease and precision!

54 Pcs Impact Bits Set, 50768

Material: S2 steel.
Contains:
1 Pc 3/8" Dr.×10mm adapter
1 Pc 1/2" Dr.×10mm adapter
14 Pcs Hex Bits:
30mm: 4, 5, 6, 7, 8, 10, 12mm
75mm: 4, 5, 6, 7, 8, 10, 12mm
10 Pcs Spline Bits:
30mm: M5, M6, M8, M10, M12
75mm: M5, M6, M8, M10, M12
14 Pcs Star Bits
30mm: T20, T25, T30, T40, T45, T50, T55
75mm: T20, T25, T30, T40, T45, T50, T55
14 Pcs Tamperproof Star Bits
30mm: T20, T25, T30, T40, T45, T50, T55
75mm: T20, T25, T30, T40, T45, T50, T55

Made in China

Car Body Alignment Claw (2-direction), 51161

Bolt size M16×70 mm
Claw width: 43 mm

Overal length: 205 mm
Single way pulling max 3 t
Side way pulling max. 1 t
Weight: 2 kgs

Made in China

BMW - Differential Front Bush Extractor F Series, 50954

Features: This tool is used to extract and install the transversely mounted differential mounting bushing that is located in the rear subframe.
The service work can be performed on-car without the removal of the subframe.
Applicable:
BMW F01 — (2008–present) 7 Series
BMW F02 — (2009–present) 7 Series long wheelbase
BMW F04 — (2011–present) 7 Series ActiveHybrid
BMW F06 — (2011–present) 6 Series Gran Coupe/M6 Gran Coupe
BMW F07 — (2009–present) 5 Series Gran Turismo
BMW F10 — (2011–present) 5 Series Sedan/M5 Sedan
BMW F11 — (2012–present) 5 Series Touring
BMW F12 — (2011–present) 6 Series Coupe/M6 Coupe
BMW F13 — (2011–present) 6 Series Convertible/M6 Convertible
BMW F18 — (2010–present) 5 Series long wheelbase

Models: BMW F01 / F02 / F06 / F07 / F10 / F11 / F13

OEM Bush number: 33316792873

Made in China

Tire thread and brake lining gauge, 9B1802

Used to measure the amount of lining remaining on riveted and bonded drum shoes and disc brake pads.
Measures tire thread depth up to 9/16" in graduations of 1/64".
Checks pads without having to remove caliper completely.

Made in Taiwan

18” (460 mm) Magnetic tool holder, 50246-18

Convenient organizer for various tools as screwdriver, ratchet, hammer etc.
Screw and fasten on the wall.
Length: 460 mm (18 ”)

Made in China