INSTRUMENTS

Flare nut wrench 12-14 mm, C7511214

Material: Cr-V

Made in Pard, Taiwan

Ford Petrol and Diesel Engines Flywheel Locking Tool, 50288

Features: Applicable for use on a larger model group in the Ford range in both petrol and diesel engines.
The set includes:
Locking tool - OEM 21-168 / 303-393
Adapter - 303-393-01
Adapter - 303-393-02

Application: Suitable for the following FORD models:
- Focus 2.0 TDCi
- Focus C Max 2.0 TDCi
- Focus 1.6 T-VCT
- Focus C Max 1.6Ti-VCT
- Fiesta 1.8 D Turbo
- Focus 1.8 / Tdi / TDCi
- Focus C Max 1.8 TDCi
- Toumeo Connect 1.8 TDDi / TDCi
- Transite Connect 1.8 TDDi / TDCi

Made in China

SUBARU Forester 2500 c.c. Camshaft Pulley Holder, 50223

Features: To fixing the timing belt and easy to remove or install it. With three fixing points.
Application: SUBARU FORESTER 2500 c.c.

Made in China

11 Pcs Tamperproof Torx Screwdriver Set, 50919

Chrome vanadium steel.
Round shank shape, plastic and elastomer handle.
Magnetic tip.
Contents:
Totx: T6×3×75mm, T7×3×75mm, T8×3×75mm, T9×3×75mm
Tamperproof: T10×5×75mm, T15×5×75mm, T20×6×100mm, T25×6×100mm, T27×6×100,T30×6×125mm, T40×8×150mm

Made in China

Valve Spring Compressor Set for Motorcycle and Cars, 50101

Features: For disassembly and assembly of valves for cars, ATVs, vans, small marine engines and most motorcycle engines.
Comes complete with 5 pcs. metal collects of different sizes: 16 mm, 19 mm, 23 mm, 25 mm, 30 mm; 3 pcs. Extension screws; 1pcs. Compression bar / c-frame; Hand lever.

Made in China

Fuel Tank Lock Ring Tool, 50866

To remove/install plastic fuel tank lock rings without damage
Compact design
Regulation range: 4" to 7-1/4"(100mm to 184mm)
Applicable: Works on many 2004 and newer vehicles including Ford F-150, Chevrolet pickups, Chrysler/Dodge mini vans, PT Cruiser, Dakota and Durango also works on smaller GM serrated rings and traditional rings.

Made in China

OPEL 1.8; 2.0L - Camshaft locking tool, 9G1201
Features:
Special locking tool for 1.8 / 2.0 16V EcoTec motors on:
Astra G / H | Frontera A | B | Omega B | Vectra A | B
VX220i Speedster | Zafi ra A / B. 2.0 | 2.2 16V gasoline engine
Engine code:
C20SEL | X20XEV | Z20LEH | LEL | LER | ATTENTION X22SE XE
Y22SE | XE | Z22XE (1996 - 2010)
OEM No. 853 KM

Produced by Force, Taiwan

20.6mm 1/2"Dr. Heavy duty spark plug socket, 807420.6

Material: Cr-V reinforced steel

Suitable for all 1/2" ratchets and T-handles

Length: 65mm

Size: 20.6mm (3/4")

Produced by Force, Taiwan

19 Pcs 1/2" Dr. Gear Lock Socket Set, 50798

Professional quality.
Made from top grade Chrome Vanadium Steel for durability and lasting strength.
Satin finish.
These special gear lock sockets provide a profile that can be used on hex or double hex and T star profiles.
Also suitable for metric and imperial size nuts or bolts and T-star profiles
With 1/2’’ Dr. Ratchet handle
Sizes include:
Metric sizes: 8, 9,10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 27, 30, 32mm
Inch sizes: 5/16 ", 11/32", 3/8 ", 7/16", 15/32 ", 1/2", 9/16 ", 19/32", 5/8 ", 21 / 32 ", 11/16", 3/4 ", 25/32", 13/16 ",
7/8", 15/16 ", 1-1 / 16" 1-3 / 16 ", 1- 1/4 "
E-profile sizes: E10, E12, E14, E16, E18, E20, E22, E24, E26, E28, E30, E34, E38, E40

Made in China

VW 2.8L – Camshaft Locking Tool, 50950

Designed to lock the camshaft of the 2.8L diesel engines used in the popular Volkswagen LT van.
To check and adjust the valve time.
Applicable: Volkswagen LT Van 1997 to 2006 2.8lt.
Engine codes: AGK 1997 to 2006, ATA 1999 to 2006, AUH 2001 to 2006, BCQ 2002 to 2006.
OEM number 3445

Made in China

4 pcs Pry Bar Set with Hammer Cap, 50778

Ideal for all kinds of applications on trucks and other heavy vehicles.
Go through blade and hammer cap.
Two component handle: Comfortable, extra large bi-material handle provides superior grip
Material of blade: Cr-V.
Contents:
1 pc pry bar 0°, length 915mm
1 pc pry bar 30°, length 915mm
1 pc pry bar 75°, length 610mm
1 pc pry bar 90°, length 610mm

Made in China

BMW B37/B38 – Balance Shaft Removal Alignment Tool, 50896

Basic tools for required to remove, replace and time the balance shaft on the new BMW 1.5, 1.2 and 1.5 petrol engines.
Application: Mini Clubman 2015 - 2017, Mini Convertible 2016 - 2017, Mini Clubman 2015 - 2017, BMW 1 and 3 series 2015 - 2017, 2 series 2014 - 2017, X1 2015 - 2017, i8 2015 - 2017
Engine codes:
B37 (diesel engines), B38 (petrol engines)
OEM tools: 2,288,943, 2,288,942 and 2,358,646

Made in China

31 pcs Wheel bearing removal tool kit, 50889

Features:
Practical set of tools for disassembly and assembly of the hub and wheel bearings.
Makes installation easy and efficient as it eliminates the need to remove the knee and steering knuckle.
The tools are made of high quality heat-treated carbon steel for durability and long service life.
The set is provided in a convenient suitcase.
Specification:
Material: carbon steel
Contents:
Pressure plates with diameters of:
50mm (1.97 "), 55mm (2.17"), 59mm (2.32 "), 63.3mm (2.49"), 66.6mm (2.62 "), 70.3mm (2.77"), 71.5mm (2.81 "), 73.1mm (2.87) "), 73.4mm (2.88"), 74.8mm (2.94 "), 77.5mm (3.05"), 81.5mm (3.21 "), 83.4mm / (3.28")
Sleeves with following diameters:
Inner diameter 69.0mm (2.72 "), Outer diameter 76.0mm (2.99")
Inner diameter 77.5mm (3.05 "), Outer diameter 86.0mm (3.38")
Inner diameter 82.0mm (3.23 "), Outer diameter 91.0mm (3.58")
Inner diameter 92.5mm (3.64 "), Outer diameter 102mm (4.02")
3 extractor bolts M12 x 1.5, Overall length 110mm (4.33 ")
3 extractor bolts M14 x 1.5, Overall length 110mm (4.33 ")
Spindle diameter 22.2mm x 300mm (0.87 "x 11.81"), (including thrust bearing)
Pressure nut 32 x 60mm (1.26 "x 2.36")
Pressure sleeve diameter 38mm x 40mm (1.49 "x 1.57")
Thrust washer diameter 40mm x 3mm (1.57 "x 0.12")
Weight: 13,500 kg

Made in China

BMW N13, N18 – Engine timing tool set, 50624

Features: For fixing the camshaft to TDC position for N13 and N18 1.6 petrol engines of the 2012 BMW 114i, 116i, 118i, 316i and Mini Cooper.
Contents:
1-1) 11-7-440 – For fixing the camshaft at TDC position
1-2) 11-7-440 – For fixing the camshaft at TDC position
1-3) 11-7-440 - Bolt (3 pcs.) For fixing the camshaft at TDC position
2) 496-709 - Alignment pin for fixing the crankshaft in TDC position
3) 11-9-340 - Chain tensioner: For tensioning the timing chain.
4) 119-590 - Crankshaft localization tool in GMT position
Application:
BMW 114i (2012-2015); BMW 116i (2012-2015); BMW 118i (2011-2015); BMW 316i (2012-2015)
Mini Cooper S (R56/57) (2010-2015)
Mini Coupe Cooper S (R58) (2012-2015)
Mini Roadster (R59) (2012-2015)
Mini Countryman (R60) (2012-2016)
Mini Paceman (R61) (2013-2017)
Mini Clubman (R55) (2011-2014)
Peugeot 207, 308
Citroen C3, c3 DS3 Vti, Picasso DS3, C4 VTi, C4 Picasso
Engine codes:
BMW: N13 B16A; N18 B16/M0; N18 B16A; N18 B16A/M0; N18 B16A/MO; N18B16C; N18B16C/TO; N18B16M0
Peugeot: EP3, EP6
Citroen: 8FR, 5SF

Made in China

VAG 1.4 TFSI – Camshaft alignment tool set, 50427

For a new version of their 1.4 TFSi petrol engine. This new engine is equipped with CoD technology (Cylinder on Demand) which allows the engine to switch between 2 and 4 cylinder running modes to maximize efficiency.
Applicable: VAG 1.4 TFSi petrol engines with codes CPTA, CZEA (2012-2018)
Audi A1 / Sportback, A3 Convertible / Sedan, A3 / A3 Sportback, Q2, Q3; Seat Ateca, Ibiza, Leon / ST; Skoda Kodiaq, Superb; & Volkswagen Golf VII, Passat, Polo.
Contents:
Camshaft Positioning Tool - OEM number T10504
Short pin - OEM number T10504 / 1
Long stepped pin - OEM number T10504 / 2
Crankshaft locking pin - OEM number T10340.

Made in China