INSTRUMENTS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
Hose clamp pliers, 50738
Hose clamp pliers, 50738
Features: To remove and install clamps for hose connections in hard-to-reach areas.
With ratchet locking mechanism.
Comfortable handle with ergonomic grip.
3/8” Dr. 5 – 25 Nm Adjustable torque wrench 418-T-60-38
3/8” Dr. Adjustable torque wrench 5 – 25 Nm, 418-T-60-38
The ratchet-type torque wrench enables to accurately limit the applied torque of fixture tightening.
It is made of chrome-vanadium steel which guarantees its durability and durability.
It has a mechanical tension of a wrench that, after reaching the required tightening force, jumps over a tooth giving distinctive sound.
The scale of the moments is located in the handle of the key and is adjusted by turning.
Once you have set the desired torque, lock the key at the end of the handle.
Square drive: 3/8" Dr.
Capacity: 5 – 25 Nm (0.5 – 2.5 Kgs)
Made in Taiwan
Snap ring pliers (internal 90° bent tip 1.8 mm), 60905ABC
Snap ring pliers (internal 90° bent tip 1.8 mm), 60905ABC
Capacity: 8-25 mm
Made in Force, Taiwan
Timing Belt Checking Gauge - PSA 1.0 / 1.2 PureTech, 51090
Timing Belt Checking Gauge, meticulously designed for PureTech 1.0 and 1.2 liter engines (PSA group). This gauge is essential for maintaining engines where the belt is immersed in oil, which can lead to wear and potential damage over time.
With this tool, you can quickly and easily measure the width and wear of the belt. Early detection of thinning below the acceptable minimum allows for timely replacement and prevents serious engine damage.
Key Features:
- Specifically designed for PSA PureTech 1.0 and 1.2 liter engines (EB-series).
- Enables quick and easy measurement of timing belt wear.
- Helps prevent serious engine damage by detecting wear early.
- Compatible with models from Peugeot, Citroën, Opel, and DS Automobiles manufactured after 2012.
- OEM#: G-0109-6 / EN-52809
- Origin: China
Application: Compatible with petrol 1.0 and 1.2 liter PureTech engines (EB-series) of the PSA group, produced after 2012, including models of Peugeot, Citroën, Opel and DS Automobiles.
4Pcs 1/2" Drive Extra Long Spline Bit Socket Set, 50467
4Pcs 1/2" Drive Extra Long Spline Bit Socket Set, 50467
Fearutes: Extra long spline bit sockets for loosening and tightening drive shaft screws from the outside.
Applicable: for VW, Audi, Seat, Skoda, including VW Transporter T4 and Touareg.
Material:
Hardened and tempered Chrome Vanadium steel sockets.
S2 steel spline bits.
Sizes:
1 pc M8 x 800mm
1 pc M10 x 800mm
1 pc M12 x 800mm
1 pc M14 x 800mm
Made in China
Pull Camp Car Body Alignment Tool (2-way), 51160
Pull Camp Car Body Alignment Tool (2-way), 51160
Bolt size M14×120mm
Claw width: 35mm
Overal length: 230mm.
One way pulling max 3 t
Side way pulling max. 1 t
Weight: 2 kgs
Made in China
BPW Rear Hub Cap Socket 111mm, 51017
BPW Rear Hub Cap Socket 111mm, 51017
Features: Oval shape socket with two flats on the side to suit BPW rear axle hub retaining cap nuts found on later model Japanese commercial trucks, tractors and automotive equipment.
Applications: BPW 12 tons.
Use with 41mm spanner or socket.
Size: 111mm (Oval) across the flats.
Made in China
Internal snap ring pliers (Long arm), MS9U0102
<p>Special design for the retaining ring in the deep hole.<br />
The most deep size: 56 mm</p>
<p>Made in Taiwan</p>
12” (305 mm) Magnetic tool holder, 50246-12
12” (305 mm) Magnetic tool holder, 50246-12
Convenient organizer for various tools as screwdriver, ratchet, hammer etc.
Screw and fasten on the wall.
Length: 305 mm (12 ”)
Made in China
Vacuum and fuel hose pliers, 50737
Vacuum and fuel hose pliers, 50737
For easy removal hose fuel and vacuum system
Working part: 35 mm
Hose dimensions: 4 - 12.5 mm (5/32 "- 1/2")
3/8" 20-110 Nm Torque Wrench 418-T-80
3/8" 20-110 Nm Torque Wrench 418-T-80
The ratchet-type torque wrench enables to accurately limit the applied torque of fixture tightening.
It is made of chrome-vanadium steel which guarantees its durability and durability.
It has a mechanical tension of a wrench that, after reaching the required tightening force, jumps over a tooth giving distinctive sound.
The scale of the moments is located in the handle of the key and is adjusted by turning.
Once you have set the desired torque, lock the key at the end of the handle.
Square drive: 3/8" Dr.
Capacity: 20-110 Nm (2 – 11 Kgs)
Made in Taiwan
Snap ring pliers (internal straight tip 1.8 mm), 60905ASC
Snap ring pliers (internal straight tip 1.8 mm), 60905ASC
Capacity: 8-25 mm
Made in: Taiwan, Force
3/8"Dr. 22mm Oxygen Sensor Socket 50323C
The 3/8"Dr. 22mm Oxygen Sensor Socket 50323C is an essential tool for removing and installing oxygen sensors.
- Drive: 3/8" for compatibility with standard ratchets and extensions.
- Size: 22mm, 6-point (hex) design ensures a secure grip on the sensor.
- Durable Construction: Made from high-quality Chrome Vanadium steel for strength and longevity.
- Slotted Design: Features a 20mm wide slot to accommodate sensor wiring during removal and installation, preventing damage.
Made in China
One way Heavy Duty Pull Clamp, 51159
One way Heavy Duty Pull Clamp, 51159
Bolt size: M20x120 mm
Claw width: 45 mm
Overal lenght: 230 mm
One way pulling max 5 t
Weight: 3 kgs
Made in China
17 Pcs Go-Through Socket Set, 51101
17 Pcs Go-Through Socket Set, 51101
Suitable for Hex, Square, 12-Point, Spline, Torx nuts and bolts.
Set contains:
13 pcs Go-Through Socket: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 21, 22, 24 mm
1 pcs 19mm Go-Through Ratchet Handle
1 pcs 19mm (F) x 3/8" (M) Quick-Release Adapter
1 pcs 19mm (F) x 1/2" (M) Quick-Release Adapter
1 pcs 75mm Go-Through Extension Bar
Material: Cr-V
Chrome plated
Made in China
