INSTRUMENTS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
4 pcs Mercedes Benz transmission engine oil dipstick, 50931
4 pcs Mercedes Benz transmission engine oil dipstick, 50931
Four color coded transmission engine oil dipsticks where the dipstick is not available with the vehicle.
- Red: 1220mm long for gearbox oil on 722.6_L / G / P / V
- Green: 920mm long for gearbox oil on 722.7_P/722.8_P /16.5_V
- Blue: 930mm long for engine oil on M112 / M113 / 646 / 647 / 648
- Yellow: 930mm long for engine oil on 103.943 / 984 / 985 / 104 / 111 / 119 / 120 /137.603 / 913 / 963 / 97 / 604 / 605 / 606 / 611 / 612 / 613 / 628 / 612 / 965
Made in : China
Valve insertion tool, 50928
Valve insertion tool, 50928
Chrome plated with plastic shaft
Made in China
Oil filter spanner wrench 46 mm, 50801
Oil filter spanner wrench 46 mm
Size: 46 mm - 12 pt.
Suitable for VW, Audi, Skoda, Seat
For removing and refittung differentialters - Haldex
Valve repair tool, 50904
Valve repair tool, 50904
Ideal for fast removal and installation of core without damage from a wheel valve.
Robust Steel Shaft with corrosion resistant plating and durable plastic handle.
Suitable for motorcycles, cars, bikes and commercial vehicles.
Lenght: 95mm
Made in China
2.3D JTD; 3.0D JTD; 3.0D Hdi Diesel engine setting/locking kit, 50674
Diesel engine setting/locking kit 2.3D JTD; 3.0D JTD; 3.0D Hdi, 50674
Suitable for adjustment and engagement of the Fiat 2.3D JTD diesel engine, the Fiat 3.0D JTD diesel engine and the Citroen / Peugeot 3.0D Hdi diesel engine (Chain Drive).
The set includes camshaft adjustment pins, crankshaft locking bolts and a locking sensor.
Made in China
BMW Crankshaft pulley holder (N47) , 780-8376
BMW Crankshaft pulley holder (N47) , 780-8376
Used for dismantling and replacing the damper disc on BMW N47; N57.
For fixing the crankshaft pulley when loosening or tightening the center pulley bolt.
11 7 221 - Bracket
11 7 222 - Handle: M8 for N47 / N57
11 7 223 - Screw: M8 for N47 / N57
11 7 224 - Handle: M10 for N47TU / N57TU
11 7 225 - Screw: M10 for N47TU / N57TU
11 6 480 - Crankshaft Rotor Tool
Application: BMW: 325,330,335,525,530,535,730
Made in Taiwan
VAG 2.4 & 3.2 FSI Engine timing tool set , 50600
Engine timing tool set for VAG 2.4 & 3.2 FSI, 50600
For checking and adjusting the engine timing suitable for Audi V6, V8 and V10 engines with chain
Contents:
- Camshaft locking tool - (use as OEM T40070)
- Crankshaft locking pin - (use as OEM T40069)
- Chain tensioner locking pin - (use as OEM T40071)
Application:
VW:
Jetta ab 2005J.
AUDI:
A4, RS4, S5, A6 / Allroad, A8, S8, R8, Q7 ab 2005J.
2,4 V6 – BDW
3,2 V6 FSI – AUK, BGP, BGQ, BKH, BPK
4,2 V8 FSI – BVJ, BNS, BYH, CAUA
5,2 V10 FSI – BXA, BSM
For checking and adjusting the engine timing
suitable for Audi V6, V8 and V10 engines with chain
Three-cylinder 1.2L VAG enginesTiming locking tool set, 50332
Timing locking tool set for three-cylinder 1.2L VAG engines, 50332
Application:
VW POLO, 3 cyl engines 1.2 12V from 2002
SKODA FABIA, 3 cyl engines 1.2 12V from 2003
Engine codes: AZQ, BME
ОЕМ: Т10414
Made in China
6 pcs Slide hammer injector puller set for Mercedes Benz CDI engines
6 pcs Slide hammer injector puller set for Mercedes Benz CDI engines
Designed for fast and professional remove of Mercedes-Benz car injectors without the need to remove the cylinder block.
Components made of CR-Mo and S45C steel.
Suitable Mercedes with CDI engines.
Application: For Mercedes-Benz CDI engines 611.612.613, etc.
SAC (Self-adjusting connectors) Clutch Disassembly and Assembly kit , 50442
SAC Clutch Disassembly and Assembly kit , 50442
For quick and professional disassembly and installation of SAC (self-adjusting connectors).
It fits with almost all SAC connectors with step 3 and 4 holes from VAG, BMW, Opel, Volvo, Renault and others.
Applicable to the following car models:
- AUDI A3, A4, A6, A8
- VW Passat, Golf, Sharan, Tiguan
- FORD Mondeo, S-max, Galaxy, Transit
- Mercedes C, E, CLS, S, CLK, SLK, SL
- BMW 320, 330, 520, 530
- Alfa Romeo 147, 159, 166
- FIAT Ulysse, Chroma, Ducato
- Lancia Phedra, Theisis
Made in China
3 pcs Seal puller set, 50637
3 pcs Seal puller set, 50637
For quickly and easily remove grease and oil seals and O-rings
A specially curved tip facilitates removal.
Available in the following lengths: 165, 117, 150 mm.
Easy to use.
Made in China
6" Strap Oil Filter Wrench, 211-0611
6" Strap Oil Filter Wrench, 211-0611
Range: Up to 6" (150 mm)
Use with 1/2"Dr. Ratchet
Strong nylon belt will not slip
Oil filter wrench, 096-3102A
Oil filter wrench, 096-3102A
Working range: 63 - 102 mm
Working with ratchet handle 3/8" DR. and 1/2" DR.
Made in Taiwan
3/8”Dr. Motorcycle front spindle socket, 50414
3/8”Dr. Motorcycle front spindle socket, 50414
This tool has 4 - steped sizes and is suitable for developing the front axle spindle of the most popular motorcycles.
Used with a 3/8 "Dr.
Dimensions: 17, 19, 22 24 mm
Length: 63 mm ...
Oil filter wrench, 209-0036
Oil filter wrench, 209-0036
Working range: 63-102мм ( 2-1/2"-4")
Working with ratchet handle 3/8" DR. and 1/2" DR.
Made in Taiwan
