INSTRUMENTS

Get the job done right with the Ford Mazda Engine Timing Tool Set 50086. This comprehensive kit includes tools for adjusting and locking camshafts, locking the injection pump shaft, and tensioning the timing belt.

The kit is suitable for a wide range of Ford and Mazda engines, including 1.4L, 1.6L, 1.8L, 2.0L, and 2.3L variants, as well as ZETEC E and SE engines. It also works with Mazda 121 1.25 (16Valve) and Diesel engines from 1.4L to 1.9L.

This set includes essential components, such as camshaft and crankshaft alignment tools, flywheel locking tools, and injection locking pins, all made in China and designed to meet OEM standards.

• Adjustment and camshaft locking tool
• Pulling off crankshaft pulley tool
• Suitable for Ford and Mazda engines

Piston ring compressor, 53-175 мм, 50090

High-quality spring steel wraps construction and tensioning mechanism.
Height: 75 mm (3 ")
Capacity: 53-175 mm (2-1 / 8 "to 7")
Supplied with quadrilateral key.

40" Breaker bar 3/4"Dr., 50002A

Suitable for to break and loosen rusted, stubborn or stuck nuts and bolts.
Used with sockets 3/4 "Dr.
Overall length: 1015 mm (40 ")
Head Material: Cr-Mo

Made in China

Seal for transmission oil, AI050069

24" Breaker bar 1/2"Dr., 50002

Suitable for to break and loosen rusted, stubborn or stuck nuts and bolts.
Used with sockets 1/2 "Dr.
Overall length: 615 mm (24 ")
Head Material: Cr-Mo

Made in China

Oil dipstick for engines, AI050084

111 Pcs 1/4", 1/2" Drive Socket Set, 10111

Material: CR-V
Set contains:
1/2" Drive
17 pcs  6-pt Flank Socket: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24, 27, 30, 32mm
5 pcs    6-pt Flank Deep Socket: 14, 15, 17, 19, 22mm
8 pcs    Star Socket: E10, E11, E12, E14, E16, E18, E20, E24
1 pc      72 Teeth Ratchet Handle
2 pcs    Extension Bar: 125mm, 250mm
1 pc      Universal Joint
1 pc      3 Way Adapter
2 pcs    Spark Plug Socket: 16mm, 21mm
1 pc      Bit Holder 5/16"
17 pcs  Bits 5/16" x 30mm(L):
              Torx: T40, T45, T50, T55, T60
              Hex: 7, 8, 10, 12, 14 mm
              FD: 8, 10, 12 mm
              Phillips: PH3, PH4
              Pozidriv: PZ3, PZ4

1/4" Drive
13 pcs  6-pt Flank Socket: 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm
8 pcs    6-pt Flank Deep Socket: 6, 7, 8, 9, 10, 11, 12, 13 mm
5 pcs    Star Socket: E4, E5, E6, E7, E8
1 pc      72 Teeth Ratchet Handle
1 pc      Universal Joint
2 pcs    Extension Bar: 50 mm, 100 mm
1 pc      Sliding T-bar, 115mm
1 pc      Spinner handle, 150mm
1 pc      1/4" Drive Flexible Extension Bar
1 pc      1/4"× 1/4" Square-Hexagonal Adapter
4 pcs    Hex Key Wrench: 1.27, 1.5, 2, 2.5 mm
18 pcs  Bit Socket:
              Torx: T8, T10, T15, T20, T25, T27, T30
              FD: 4, 5.5, 7 mm
              Hex: 3, 4, 5, 6 mm
              Phillips: PH1, PH2
              Pozidriv: PZ1, PZ2

Made in China

94 pcs 1/2" Dr. & 1/4" Dr. Socket wrench set, 10094

Material: Chrome Vanadium Steel
72 teeth ratchet handle with quick release

Contents:

1/2" Drive
(1) 6-pt. Flank sockets: 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 27, 30, 32 mm
(2) 6-pt. Flank Deep Socket: -14, 15, 17, 19 mm
(3), 72-Tooth Ratchet handle with Quick-Release
(4) Extensions bar: 125 mm, 250 mm

(1) Universal Joint
(2) 3 Way Adapter
(3) 5/16" Bit Adapter
(4) Star Plug Socket: 16 mm, 21mm
(5) Hex Key Wrench: 1.5, 2, 2.5 mm
(6) Slotted: 8, 10, 12 mm
(7) Phillips: 3, 4 mm
(8) Pozidriv: 3, 4 mm
(9) Torx: T40, T45, T50, T55

1/4" Drive

(1) 6-pt. Flank sockets: - 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm
(2) Deep Socket: - 6, 7, 8, 9, 10, 11, 12, 13 mm
(3) 72-Tooth Ratchet handle with Quick-Release
(4) Extension bar:  50 mm, 100 mm
(5) Spinner Handle – 150 mm
(6) Sliding Bar – 100 mm
(7) Universal Joint

(1)1/4" Square-Hexagonal Adapter
(2) Hex: 3, 4, 5, 6 mm
(3) Slotted: 4, 5.5, 7 mm
(4) Phillips: 1, 2 mm
(5) Pozidriv: 1, 2 mm
(6) Torx: T8, T10, T15, T20, T25, T27, T30

VAG 2.4/2.5 TDI Engine Timing Tool Set, 780-8177

Set of engine timing locking tools for use on Volkswagen 2.4D with engine codes AAB, AJA (02/95-03).
• The correct alignment is achieved by placing equal thickness of shims between both ends of the bracket and the cylinder head Camshaft Setting Strap is used to set the correct timing position of the camshaft.
• The centre Part of the bracket fits into the slotted end of the camshaft and the ends of the bracket located on the cylinder head.
• Injection Pump Pulley Setting Spigot is 15.4mm in diameter and is used on engines with a one piece injection pump sprocket.
• The crankshaft damper holding tool prevents the damper from rotating whilst unfastening and refastening the centre bolt.
• This tool should be used with 3/4" Dr. power bar. VW group 2.5TDi common rail diesel engines (belt) in VOLKSWAGEN LT Crafter BJJ, BJK, BJL and BJM engines.

Auxiliary stretch belt removal installation tool, 902G9

Designed for the recommended removal and installation of elasticated or stretch drive belts fitted to modern auxiliary drive systems such as the alternator or power steering.
■ Prevents damage to the pulley and prolongs the life of the belt.
■ Two tools included, one for installation and one for removal.
■ Fits most crankshaft pulleys.
■ Supplied in Blow-Molded Case.

4mm Flexible magnetic pick up tool, 13006101A

Features:

Precision tool for removing broken debris and other metal parts and from glow plug apertures  and from hard-to-reach areas.

Diameter of magnet 4 mm

Working length - 380 mm

Origin: Taiwan

Timing Belt Change Engine Tool Set for Fiat, Ford, Lancia 1.2 & 1.4 8V, 780-8141

Features:
For locking the camshaft and crankshaft in place while you change the timing belt and perform other repairs on Fiat engines.
Kit consists of crankshaft locking tool, camshaft setting plate and belt tensioner adjuster for the 1.2 engine, and additional sprocket locking tool and alignment fixture for the camshaft on the 1.4 VVT engine.

Applicable:
Facilitates changing of the timing belt and allows checking of the engine timing on following cars:
- Fiat: 500 (07-12), Doblo/Cargo (05-10),Grande Punto (07-12), Idea (04-12), Linea (07-11), Panda EVO2, Punto EVO (09-12).
- Lancia: Ypsilon (06-11), Musa (05-12).
- Ford: Ka (09-12).
Fits following engines mdodels:
- Fiat: 1.2/1.2 Dualogic, 169A4.000,188A4.000 (EVO2), 199A4.000 1.4/1.4 Bi-Fuel LPG / 1.4 Natural Power CNG,199A7.000, 350A1.000.
- Lancia: 1.4/1.4 Bi-Fuel LPG, 350A1.000.
- Ford: 1.2 Duratec, 169A4.000 (FP4).
Includes following tools:
- Crankshaft Locking Tool
  to be used as OEM 2.000.004.500 on Fiat/Lancia and OEM 303-1480 on Ford.
- Camshaft Setting Tool
 to be used as OEM 2.000.004.400 on Fiat/Lancia and OEM 303-1479 on Ford.
- Camshaft Sprocket Locking Tool
 to be used as OEM 2.000.004.200 on Fiat/Lancia and OEM 303-1477 on Ford.
- Camshaft Cover Aligner 
to be used as OEM 2.000.004.300 on Fiat/Lancia and OEM 303-1478 on Ford.
- Tensioner Adjuster
 to be used as OEM 1.860.987.000 on Fiat/Lancia.

Made in Taiwan

40 pcs Standard blade auto fuses 3-30A, 1305083005
Fast acting.
Low voltage - up to 32 V DC
Material:
- body - plastic
- metal part - zinc alloy
Standard - according to SAE J1284
Application: To protect the electrical circuit