INSTRUMENTS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
One way Heavy Duty Pull Clamp, 51159
One way Heavy Duty Pull Clamp, 51159
Bolt size: M20x120 mm
Claw width: 45 mm
Overal lenght: 230 mm
One way pulling max 5 t
Weight: 3 kgs
Made in China
BMW - Differential Front Bush Extractor F Series, 50954
BMW - Differential Front Bush Extractor F Series, 50954
Features: This tool is used to extract and install the transversely mounted differential mounting bushing that is located in the rear subframe.
The service work can be performed on-car without the removal of the subframe.
Applicable:
BMW F01 — (2008–present) 7 Series
BMW F02 — (2009–present) 7 Series long wheelbase
BMW F04 — (2011–present) 7 Series ActiveHybrid
BMW F06 — (2011–present) 6 Series Gran Coupe/M6 Gran Coupe
BMW F07 — (2009–present) 5 Series Gran Turismo
BMW F10 — (2011–present) 5 Series Sedan/M5 Sedan
BMW F11 — (2012–present) 5 Series Touring
BMW F12 — (2011–present) 6 Series Coupe/M6 Coupe
BMW F13 — (2011–present) 6 Series Convertible/M6 Convertible
BMW F18 — (2010–present) 5 Series long wheelbase
Models: BMW F01 / F02 / F06 / F07 / F10 / F11 / F13
OEM Bush number: 33316792873
Made in China
4" (102 mm) Replacement stone, 50724
4" (102 mm) Replacement stone, 50724
Size: 4" (102 mm)
3 pcs set, for Standard engine cylinder hone 50724
Made in China
2-Jaw Gear puller 80х100, 9481044
2-Jaw Gear puller 80х100, 9481044
Made of forged chromium-vanadium steel, rust resistant, heat treated.
High-precision hardened self-centering black-coated steel screw.
Galvanized parallel arms.
Applies even pressure to prevent damage.
Application: For removal of both internal and external gears, flywheels, rollers, etc.
Thigh depth: 100 mm
Axis width: 80 mm
Made in Taiwan
Magnetic tray Ø 100 mm, 50934
Magnetic tray Ø 100 mm, 50934
Size: Ø 100 mm
Made in China
Hose clamp pliers, 50738
Hose clamp pliers, 50738
Features: To remove and install clamps for hose connections in hard-to-reach areas.
With ratchet locking mechanism.
Comfortable handle with ergonomic grip.
13" Internal snap ring pliers, 9420656
13" Internal snap ring pliers, 9420656
Internal
Overal lenght: 320mm
Tip size: Ø3mm
Made in China
Long Reach Hose Clamp Pliers - 90° Angled, 310mm, 51414
Professional 310mm long reach pliers with a 90° angled head, specifically designed to remove and install self-tightening hose clamps in deep and confined engine spaces.
Timing Belt Checking Gauge - PSA 1.0 / 1.2 PureTech, 51090
Timing Belt Checking Gauge, meticulously designed for PureTech 1.0 and 1.2 liter engines (PSA group). This gauge is essential for maintaining engines where the belt is immersed in oil, which can lead to wear and potential damage over time.
With this tool, you can quickly and easily measure the width and wear of the belt. Early detection of thinning below the acceptable minimum allows for timely replacement and prevents serious engine damage.
Key Features:
- Specifically designed for PSA PureTech 1.0 and 1.2 liter engines (EB-series).
- Enables quick and easy measurement of timing belt wear.
- Helps prevent serious engine damage by detecting wear early.
- Compatible with models from Peugeot, Citroën, Opel, and DS Automobiles manufactured after 2012.
- OEM#: G-0109-6 / EN-52809
- Origin: China
Application: Compatible with petrol 1.0 and 1.2 liter PureTech engines (EB-series) of the PSA group, produced after 2012, including models of Peugeot, Citroën, Opel and DS Automobiles.
21 Pcs 1/4" Drive Torque Wrench Set 1 - 25Nm, 51278
21 Pcs 1/4" Drive Torque Wrench Set 1 - 25Nm, 51278
Ideal for precise screws and nuts installation.
Sockets material: Cr-V steel
Bits material: S2 steel
Torque range: 1 - 25Nm (0.7 - 18.5lbf-ft).
Scale: 0.2Nm / 0.15lbf-ft.
Accuracy: ±3%.
Drive Square Size: 1/4"
Contains:
Torque Wrench 1 - 25Nm, 72 teeth
Universal Joint
Extension Bar 100mm
Adapter 1/4"F x 3/8"M
17x Bit Sockets1/4”Dr:
Phillips: PH1, PH2, PH3
Hex (37mm): H2, H2.5, H3, H4, H5, H6, H8, H10
Hex (62mm): H5
Torx (37mm Length): T10, T15, T20, T25, T30
Made in China
2 Way Pull Clamp, 51149
2 Way Pull Clamp, 51149
Claw width: 50mm
Total length: 230mm
Single way: 3t
Side way: 1t
Weight: 2.9kgs
Made in China
BPW Rear Hub Cap Socket 111mm, 51017
BPW Rear Hub Cap Socket 111mm, 51017
Features: Oval shape socket with two flats on the side to suit BPW rear axle hub retaining cap nuts found on later model Japanese commercial trucks, tractors and automotive equipment.
Applications: BPW 12 tons.
Use with 41mm spanner or socket.
Size: 111mm (Oval) across the flats.
Made in China
Brake & Fuel Pipe Fluid Lock Set, 50708
Brake & Fuel Pipe Fluid Lock Set, 50708
A tool kit for sealing metal brake pipes.
Suitable for clamping and sealing metal flared pipes on brakingsystems, cooling system bypass fuel pipes, AC pipes etc.
3 pcs anodised Aluminium bodies with composite screw.
Sizes: 4.2mm to 10mm.
Made in China
Vacuum and fuel hose pliers, 50737
Vacuum and fuel hose pliers, 50737
For easy removal hose fuel and vacuum system
Working part: 35 mm
Hose dimensions: 4 - 12.5 mm (5/32 "- 1/2")
18" External snap pliers, 9420673
18" External snap pliers, 9420673
