INSTRUMENTS
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
Battery terminal wiper pick-up tool, 50151
Battery terminal wiper pick-up tool, 50151
Application: for battery terminals, car wipers, etc.
The tights at terminals will be lifted off without damage to the battery case or posts, because the sharp jaws are able to engage either below or on the sides of terminals.
The centre screw swivel also makes this puller very effective on alternator bearings.
Max Opening: 1 3/4"
Max Depth: 1 1/4"
Made in China
Windscreen wiper arm puller, 038-0661
Windscreen wiper arm puller, 038-0661
Remove wiper arms easily with the very compact Windshield Wiper Arm Puller. This universal tool works on all makes and models of vehicles. It has a simple and effective design to work well in hard to reach areas, without inflicting damage to the surrounding paintwork or wiper arm.
Features:
- Compact, easy to use tool
- Efficient at removing wiper arms on all vehicle makes and models
- Functions well in tight spaces
- Does not damage paintwork or wiper arm
- Features a turning knob for quick work
- Forged body is long lasting and promotes good strength
Made in Taiwan
Ball Joint Separator, 62804
FORD flywheel locking tool, 903G11
FORD flywheel locking tool, 903G11
Engine timing tool VAG, 9G0807
Engine timing tool VAG, 9G0807
Applicable:
- Audi ß A3, S3, A4, A6, TT
- VW - Beetle, Bora, Golf, Passat
- Seat - Ibiza, Cordoba, Leon, Toledo, Alhambra
- Skoda - Octavia
Made in Pard, Taiwan
FORD Timing tool set, 904G6
FORD Timing tool set, 904G6
Flexible hose clamp pliers, 058-6241A
Flexible hose clamp pliers, 058-6241A
These pliers are cable wires, meaning they’re capable of reaching into narrow areas.
In all, the cable on these pliers measures in 24 inches.
This gives you plenty of reach regardless of what care you’re working on.
Equipped with a locking mechanism, these pliers can stay attached to hose clamps without your assistance.
Made in Taiwan.
53-118 mm Oil filter wrench, 63153118
53-118 mm Oil filter wrench, 63153118
Capacity: 53 - 118 mm.
Spring and cam locking mechanisms
Chrome-plated drop forged steel
Length: 230 mm
Produced by Pard, Taiwan
Adjistable fuel tank lid remover, 50909
Adjistable fuel tank lid remover, 50909
Working with combination wrench 16 mm
Working Range 100 - 170 mm
Made in China
75mm 15-pt. Oil filter wrench, 6317515
75mm 15-pt. Oil filter wrench, 6317515
Applicable: GM, CHRYSLER
Origin: Force, Taiwan
65 mm 3/4"Dr. 12-pt. Flank socket, 50469
3/4"Dr. 12-pt. Flank socket 65 mm, 50469
Specially for the hub nuts on transit vans.
Size: 65 mm
Material: Cr-V
Made in China
1/2"Dr Injection Line socket, 50802
1/2"Dr Injection Line socket
Set of special open twelve-walled keys for unwinding and turning the nuts of the high pressure tubes to the fuel nozzles or the pump.
Suitable for BMW Diesel engines and OPEL 2.5 TD engines.
Material: Cr-V
Size: 14; 17; 19 mm ...
Citroen/Peugeot 2.0/2.2HDi 16V - Diesel injector Puller set, 50638
Effortlessly remove stuck injectors with our Diesel Injector Puller Set for Citroen and Peugeot 2.0/2.2HDi 16V engines. Avoid cylinder head removal!
- Perfect for engine codes: DW10ATED4, DW10ATED/L4, DW10JATED4, DW12ATED4/L4.
- Includes a massive bridge to protect the engine block.
- Comes with injector sockets, screws, nut puller, and more for comprehensive use.
BMW Common rail injector set, 50630
BMW Common rail injector set, 50630
Special tool pulling out stuck injectors
with BMW Diesel Engine Code with M47TU / M 47T2 / M57 / M57TU / M 57T2
The support on the cylinder head enables high pull-off
disassembly of the cylinder head is therefore not necessary
The particular form of puller allows safe and precise extraction, especially in very tight injectors / injectors.
Contents
- 2 support feet 115 mm
- 2 support feet 140 mm
- Supporting bridge with ball bearing
- Spindle M16 with unilateral M17 thread for mounting in the injector
- 29mm socket wrench for removing the electrical unit
- Allen key for removing the injector needle
For the following BMW - types
In contrast to solutions with impact hammer, the injectors are removed with this tool by even train and in the optimum position for installation position.
E38: 730 d
E87: 118 d / 120 d
E46: 318 d / 320 d / 330 d
E39: 520 d / 525 d / 530 d
E60/E61: 520 d / 525 d / 525 xd / 530 d / 530 xd / 535 d
E63/E64: 635 d ( 04-10 )
E38/E65/E66: 730 d
E83: X3 2.0 d / 3.0 d
E53/E70: X5 3.0 d
E90/E91: 316 d / 320 d
E90/E91/E92/E93: 325 d ( 06-10 ), 330 d / xd ( 98-08 ), 335 d
This also applies to same engine in a Land Rover - types such as
Range Rover: 2.5 DT Year 1994 - 2002
Range Rover: 3.0 TD6 2002 - 2006
Freelander: 2.0 TD4 2002 - 2006...