INSTRUMENTS

Ball Joint Separator 29 mm, 093-4323C
Features:
- Drop forged steel body and bolt for long and rough usage.
- Suitable for splitting track rod ends, anti-roll bar mountings, steering ball Joints and etc.

Jaw size: 29 mm

Ball Joint Separator 23mm, 093-4323B

Features: Drop forged steel body and bolt for long and rough usage.
Suitable for splitting track rod ends, anti-roll bar mountings, steering ball Joints and etc.

Jaw size: 23 mm

Screw: M16x1.5x70 mm

3/4"Dr. Star impact deep socket E18, 46611018

• 3/4-inch Drive
• For operation of cylinder head bolts
• Phosphated surface
• On MAN commercial vehicles with engine D8

Material: Cr-Mo

Produced by Force, Taiwan

Ball Joint separator 28 mm, 093-4349A

•  Drop forged steel body and bolt for long and rough usage
• Suitable for splitting track rod ends, anti-roll bar mountings, steering ball Joints and etc.
• Audi A4-A6-A8, VW, Passat ab '97 and Mercedes W203 Etc.

Jaws open: 28 mm
Jaws deep: 25 mm

3/4"Dr. Star impact deep socket E24, 46611024

• 3/4-inch Drive
• For operation of cylinder head bolts
• Phosphated surface
• On MAN commercial vehicles with Common Rail engine

Material: Cr-Mo

Produced by Force, Taiwan

Ball Joint separator 23 mm, 093-4349

Futures:

• Drop forged steel body and bolt for long and rough usage
• Suitable for splitting track rod ends, anti-roll bar mountings, steering ball Joints and etc.
• Espesially in small space conditions.
• Applicable: Audi, BMW, Citroen, Ford, Mercedes, Opel, Peugeot, Renault, Rover, Saab, Volvo, VW etc.

Jaw open: 23 mm
Jaw deep: 25 mm

Diesel pre-chamber collar nut socket for Mercedes, 9G0122

Spline socket for pre-chamber repair of all diesel engines sinse 1989.
Mercedes Diesel engines: 601, 602, 602.91, 603, 604, 605, 606, 661, 662
Size: 1/2" Dr. x 58 tooth

Mechanic's stethoscope, 812-0201

Locates source of engine niose;
Quickly listen for trouble by tracing sound of flowing water, oil gas or steam;
Identify piston slap, wop gears, faulty valves, water pump, failute damaged gaskets and effective bearings;
Handle is snockproof;
Disassembles for storage.

1/2"Dr. 33-pt Mercedes Benz fuel injection pump socket, 9G0121

3 pcs Bearing separator, 160-9315

Equal pulling force diatributed as 3 support points
FLEXIBLE SPREAD FROM 35 mm ~105 mm
Made from SCM415 material
Bolt size: 1/2" х 20Т х L135 mm
Made in Taiwan

Screw extractor set, 632082

Sizes: 1/8"; 1/4"; 5/16"; 7/16"; 9/16"; 3/4"; 1"; 1.1/8" (CR-MO)

Produced by Pard, Taiwan

3 Pcs Glow plug pullerand reamer set, 50336

Suitable for removal of stubborn glow plugs on Mercedes Benz vehicles with melted electrodes

Valve spring compressor, 62112

• To disassemble and assemble the valve springs with the head fixed or detached from the engine
• Fits 3/8 '' and 7/16 '' 'Rocker Studs'
• Suitable for springs with a diameter of 1 '' - 2 ''
• Press down to compress the oil spring, remove the valve holders and slowly release...

5 pcs Fill/Drain plug key set, 5051

Contents:
17 мм Hex - 15 мм Hex
10 мм Hex - 12 мм Hex
9 мм Hex - 5/16" Hex
8 мм Sq. - 13 мм Sq.
3/8" Sq. - 11 мм Sq.

Made in Force, Taiwan

5 pcs 1/2"Dr. Twist socket set

Socket size: 17 mm, 19 mm, 21 mm, 22 mm and 12 mm and drift punch.

THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!

Made in China