UNDER CAR TOOLS

Wheel Hub and Bearing Removal & Installation Tool Set - MG51429

Heavy-duty tool kit designed for removing and installing drive flanges and wheel bearings on FWD and RWD vehicles.

Made in China

Wheel Gripper and Joint Play Tester, 51438

Professional 2-in-1 tool for suspension joint play testing and loosening stuck wheels. Fits wheel diameters 550–800mm.

Made in China

1/2" 30mm 12pt Dr. Hub Nut Impact Socket 50475-30

Heavy-duty 30mm 12-point impact socket specifically designed for axle and hub nut removal using 1/2" drive tools.

Made in China

Hydraulic Truck Spring Eye Bush Tool Set (12 Tonne), 51426

Heavy-duty professional tool set featuring a 12-tonne hydraulic cylinder for efficient removal and installation of truck spring eye bushes.
The kit includes multiple adapters and press discs to ensure precise work without damaging surrounding components.
Ideal for automotive workshops, mechanics, and maintenance professionals.

Made in China

8 Pcs Locking Lug Nut Socket Set, 51417

Professional 8-piece set designed for easy removal of locking lug nuts.

Manufactured from heavy-duty chrome molybdenum (Cr-Mo) steel for maximum durability.

Made in China

Frame Rack Clamp Bar 5 Ton Capacity, 51319

Description: Double-grip frame straightening clamp bar with a 5-ton capacity, designed for pulling and straightening vehicle frames in professional auto body repair shops.

Application:

Designed for restoration, repair, and maintenance of vehicle body structures after accidents, corrosion, or wear. This includes straightening deformations, welding, panel replacement, painting, and geometry adjustment to restore the vehicle to a safe and functional condition. This includes:
• Straightening deformations: Restoring the original shape of metal parts after impact.
• Welding and cutting: Removing damaged components and installing new or sound elements.
• Panel replacement: Doors, fenders, hoods, roofs.
• Geometry adjustment: Restoring correct chassis geometry, critical for vehicle safety.
• Surface preparation and painting: Priming, sanding, and painting to prevent corrosion and restore appearance.
• Anti-corrosion protection: Treatment of the vehicle underbody and cavities.

Made in China

Fork type ball joint separator 18 mm, 50434-1

18 mm ball joint fork – quickly and safely separates ball joints in cars and machinery.
Used to remove tie rod ends, Pitman arm, and ball joint.

Made in China

Fork type ball joint separator 24 mm, 50434-2

24 mm ball joint fork – quickly and safely separates ball joints in cars and machinery.
Used to remove tie rod ends, Pitman arm, and ball joint.

Made in China

Fork type ball joint separator 28 mm, 50434-3

28 mm ball joint fork – quickly and safely separates ball joints in cars and machinery.
Used to remove tie rod ends, Pitman arm, and ball joint.

Made in China

The Hydraulic Extractor and Installer Set 51334 simplifies the removal and installation of bearings and seals from Ø18 to Ø60 mm. Its hydraulic cylinder connects to a hand or foot pump. This set includes 22 short sleeves (40mm) and 22 long sleeves (110mm) with windows to prevent over-installation. Also included are 4 spindles for common center hole sizes and an 18-ton hydraulic cylinder.

• Wide Application: Suitable for bearings and seals from Ø18 to Ø60 mm.
• Hydraulic Power: Simplifies removal and installation tasks.
• Comprehensive Set: Includes short and long sleeves, spindles, and a hydraulic cylinder.

Suspension Split Hub Knuckle Spreader, 51305

Features:
A compact hub clamp spreader tool designed to allow the suspension split hub to be held open to make the removal and fitting of the suspension strut easier.
Suitable for use on various BMW, Citroen, Ford, Peugeot and VW Group models, the double ended design allows it to be used on larger upper split hubs together with lower ball joint split hubs without the risk of damage.
For removal and fitting of suspension struts whilst leaving the hub on the vehicle.
Double ended action allows use on both larger upper split hubs and lower ball joint split joints.

Applications include: Audi, BMW, Citroën, Ford, Peugeot and Volkswagen.

Use with 10mm hand tools only, MAX torque 13Nm.
Maximum opening 14mm.

Keep thread clean and lightly lubricated.

THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!

Made in China

Hydraulic Drive Shaft Remover/Press Set, 50127

Used to press drive shafts out of wheel hubs.
For 4 or 5 bolt hubs with the centerline of the bolts mounted in a 98-125 mm diameter circle.
Especially for glued and rusty drive shafts.
Has a 10 ton capacity.

Applicable: VW, Audi, Seat, Skoda, Opel, Volvo, Fiat, Renault, Peugeot, Citroen and more.

Made in China

BMW - Differential Front Bush Extractor F Series, 50954

Features: This tool is used to extract and install the transversely mounted differential mounting bushing that is located in the rear subframe.
The service work can be performed on-car without the removal of the subframe.
Applicable:
BMW F01 — (2008–present) 7 Series
BMW F02 — (2009–present) 7 Series long wheelbase
BMW F04 — (2011–present) 7 Series ActiveHybrid
BMW F06 — (2011–present) 6 Series Gran Coupe/M6 Gran Coupe
BMW F07 — (2009–present) 5 Series Gran Turismo
BMW F10 — (2011–present) 5 Series Sedan/M5 Sedan
BMW F11 — (2012–present) 5 Series Touring
BMW F12 — (2011–present) 6 Series Coupe/M6 Coupe
BMW F13 — (2011–present) 6 Series Convertible/M6 Convertible
BMW F18 — (2010–present) 5 Series long wheelbase

Models: BMW F01 / F02 / F06 / F07 / F10 / F11 / F13

OEM Bush number: 33316792873

Made in China

BPW Rear Hub Cap Socket 111mm, 51017

Features: Oval shape socket with two flats on the side to suit BPW rear axle hub retaining cap nuts found on later model Japanese commercial trucks, tractors and automotive equipment.
Applications: BPW 12 tons.
Use with 41mm spanner or socket.
Size: 111mm (Oval) across the flats.

Made in China

Scania Rear Axle Nut Socket 100mm, 51016

Features:
Used to remove and install the rear axle nut on Scania trucks.
Size: 3/4" Drive x 100mm (8-point)

Made in China