VW T5 Tuareg LT 2.5TDI -Water pump removal tool set, 50373

The water pump of the VW Transporter and the VW Touareg is driven by the gears that drive the engine.
The kit is used to remove the water pump and bring the engine to the top dead center (TDC position).
Application:
VW Transporter T5 (after 2004) 2.5 TDI (engine: AXE, AXD, BNZ)
VW Touareg (after 2003) 2.5 5-cylinder TDI engines (engine: BAC, BPE)
Engine Codes: AXD, AXE, BAC, BLJ, BLK, BNZ, BPC, BPD

OEM No. T10221; T10221A; T10222; T10222A; T10225; T10225A

Made in China

VAG Coolant Pump Thermostat Wrench, 50907

Features: To easy removal and installation of thermostat without causing any unnecessary damage.
Applicable: Audi A3 2013> , VW Golf 2013 >, Skoda Octavia 2013 >, Seat Leon 2013>
Engines: 1.0 TFSi 3-cyl, 1.2 TSi, 1.4 TFSi, 1.4 FSi, 1.4 TDiCR 3-cyl.
OEM Tool: T10508

Made in China

OPEL 1.8; 2.0L - Camshaft locking tool, 9G1201
Features:
Special locking tool for 1.8 / 2.0 16V EcoTec motors on:
Astra G / H | Frontera A | B | Omega B | Vectra A | B
VX220i Speedster | Zafi ra A / B. 2.0 | 2.2 16V gasoline engine
Engine code:
C20SEL | X20XEV | Z20LEH | LEL | LER | ATTENTION X22SE XE
Y22SE | XE | Z22XE (1996 - 2010)
OEM No. 853 KM

Produced by Force, Taiwan

Engine Locking Timing Tool Kit-Ford-Mazda, 50375

Description:

Designed for pulling off the camshaft timing belt wheel and locking or positioning the engine output shafts such as the camshaft and the crankshaft.
Required for changing the timing belt or for engine
Applicable:
FORD 1.8 D/TD/TDCI diesel and 1.25 - 2.0 16V Zetec petrol engine e.g
FORD Fiesta, Fscore / Oruon, Focus, Puma, Sierra, Modeo, Cougar, Couier / Kombi, P100
Mazda 121

Contents:
Crankshaft/Fuel Pump Alignment Pins x2pcs (5.8mm) - 21-260, 303 732
Crankshaft TDC Locking Pin - 21-163, 303 620
Crankshaft Timing Pin - 21-210, 303-507
Crankshaft Timing Pin - 303-193, 21-163
Flywheel Locking Tool - 21-168, 303-393
Camshaft Sprocket Remover - 21-229, 303 651
Camshaft Sprocket Remover - 21-229, 303 651
Camshaft Sprocket Remover - 21-229, 303 651
Camshaft Setting Strap - 303-376, 303-367, 21-162B
Timing Pin - 21-210, 303-620
Crankshaft Timing Tool - 21-159, 303-748

Made in China

Petrol Engine Setting/Locking Kit for BMW N62/N62TU V8, N73 V12 - Chain Drive, 50654         

Suitable for setting and adjusting the timing on BMW 3.6, 4.0, 4.4, 4.8 N62/N62TU V8 and 6.0 N73 V12 engines.
Kit includes camshaft setting plates, flywheel locking pin and chain pre-tensioning tool.            
OEM Tools: 11.9.190, 11.9.340, 11.9.461, 11.9.462, 11.9.463        
Applications: 540i E60/61 (05-10), 545i E60/61 (03-06), 550i E60/61 (05-10), 645i E63/64 (03-06), 650i E63/64 (05-11), 735i E65/66 (02-05), 740i E65/66 (05-08), 745i E65/66 (02-05), 750i E65/66 (05-08), 760i E65/66 (02-08), X5 4.4 E53 (03-07), X5 4.8 E53/E70 (04-10)
Engine Codes:
N62/N62TU V8: B36A, B40A, B44A, B48B
N73 V12: B60A...

Camshaft Alignment Timing Tool VW, Audi V6 90, 100, A4, A6 (94-97)
Set includes:
- One camshaft alignment fixture that interfaces with the cam gears and is utilized for the critical task of securing and maintaining TDC timing alignment when the cam belt is serviced or removed for other front-engine or cylinder head service tasks.
- One clamp for securing the camshaft alignment fixture

NOTE: This tool set is only applicable to V6 2-valve engines installed in Audi platforms from 1991-1997. It is not applicable to any 5-valve engines.
Material: Cadmium and black-oxide plated steel
Application Make: Audi
Application Detail: Audi AFC engines - Audi 90, 100, A4, A6 1994-97

Produced by Force, Taiwan

VAG Camshaft Gear Locking Tool - Camshaft sprocket locking tool, 50890

Features: For locking the camshaft in adjusting position required for checking and adjusting the engine timing
Applicable:
Seat Mii 1.0 (3 cylinder) - (from 2012)
Skoda Citigo 1.0 (3 cylinder) - (from 2011)
Volkswagen Up 1.0 (3 cylinder) - - (from 2011)
Engine code: 1.0 CHYA (44 kW), 1.0 CHYB (55 kW), 1.0 CPGA (50 kW)
OEM Tool: T1047

Made in China

Diesel engine timing tools - Ford 1.8 TDDi/TDCi – chine drive, 50328

The kit contains basic tools for timing belt replacement for 1.8D TDi / TDCi diesel engines, fitted for Ford vehicles, suitable for high pressure fuel pump Wet Belt applications. Features injection high pressure pump sprocket removal and timing chain cover alignment tools
Application:
For Ford: C-MAX (07-10), Courier (00-02),
Fiesta (00-02),
Focus (98-11), Focus C-MAX (03-07),
Galaxy (06-10),
Mondeo (07-10),
S-MAX (06-14),
Tourneo Connect (02-13), Transit Connect (02-13)
Engine Code:
1.8D TDCi: BHPA, F9DA, F9DB, FFBA, FFDA, FFWA, HCPA, HCPB, KHBA, KKDA, KKDB, P7PA, P9PA, P9PB, QYBA, QYWA, R2PA, R3PA, RWPA, RWPC
1.8D TDCi ECOnetic: KHBA
1.8D Tdi: BHDA, BHDB, BHPA, C9DA, C9DB, C9DC
1.8D Turbo: C9DC, RTN, RTP, RTQ
OEM Tools:
For Ford: 303-193 (21-104), 303-393 (21-168), 303-376 (21-162B), 303-652 (21-230), 310-095 (23-067)

Made in China

Timing tool set BMW M60, M62, M62TU - Vanos engine,  50653

Contents:
M60 M62 Camshaft Alignment / Timing Tools:  OEM No. B112440
M62 VANOS Camshaft Timing Tool: OEM No. 116450
Rigid chain tensioner: OEM No 114230
VANOS Electromagnetic Valve Socket: OEM No. 116420
M62 Chain Tensioning Bracket Trestle:
TDC pin: OEM No. 112300

VAG 1.8 /2.0L (EA888) FSI/TFSI – Engine timing tool set, 50832

Features: For Camshaft Locking tools for Audi VW SKODA VAG 1.8 2.0 TFSI EA888 SF0233.
Applications: VW Jetta Mk5, VW Jetta Mk6, VW Passat B6, VW CC, VW Scirocco, VW Golf Mk6 GTI, VW Scirocco, VW Passat B6, VW CC
Use for correct the camshaft and crankshaft timing position.
Four-cylinder EA888 petrols: 1.8L R4 16v TSI/TFSI, 2.0L R4 16v TSI/TFSI, 2006~2013 VAG series TSI, TFSI EA888 engine(1.8L, 2.0L).
OEM Tools:
T10352, T10352/1, T10352/2, T10368, T40196, T10354, T10060A, T40011, T40265, T40267, T40271
1.8 R4 16v TSI/TFSI (EA888)
Applications:
Audi TT Mk2 (8J), Audi 8P A3, Audi B7 A4, Audi A4 (B8), Audi A5
SEAT Leon Mk2 (1P), SEAT Altea XL
Škoda Yeti, Škoda Octavia Mk2 (1Z, Ming Rui), Škoda Superb Mk2 (3T)
VW Jetta Mk5/Sagitar, VW Passat B6, VW Passat CC

2.0 R4 16v TSI/TFSI (EA888)

Applications:
VW Golf Mk5 GTI (North American markets only)
VW Golf Mk6 GTI (North American markets only)
VW Jetta Mk5, VW Jetta Mk6, VW Passat B6, VW CC, VW Scirocco, VW Golf Mk6 GTI, VW Scirocco, VW Passat B6, VW CC
Audi A3 (8P), Audi A3 Cabriolet, Audi TT, Audi A4 (B8), Audi Q5, Audi A5, Audi Q5, Audi TT Mk2 (8J),  Audi Q3
Škoda Superb Mk2 (3T), Škoda Octavia
SEAT Altea Freetrack, SEAT Leon FR, SEAT Exeo

Engine Code:
BYT, BZB, CABA, CABB, CABD, CADA, CAEA, CAEB, CAWA, CAWB, CBFA, CCTA, CCZA, CCZB, CCZC, CDAA, CDAB, CDHA, CDHB, CDNB, CDNC, CDND, CESA, CETA, CFKA, CGYA, CJEB, CJBA, CJSB.

Contents:
T10352 – Camshaft Control valve removal tool
T10352/1 – Camshaft Control valve removal tool
T10352/2 – Camshaft Control valve removal tool
T10368 – Crankshaft Thrust piece
T40196 – Drift for camshaft slide pieces

T10354 – Pressure piece
T10060A – Auxiliary drive belt tensioner locking pin
T40011 – Tensioner locking pin

T40265 – Oil pump tensioner locking pin
T40267 – Timing chain tensioner
T40271 – Camshaft clamp (Exhaust & Inlet)

Made in China

Petrol engine timing/ locking tool set - BMW M40, M42, M50, M60, M62, M70, 50616

OEM No.11 2 300, 11 4 120, 11 3 190, 11 2 443/11 2 444, 11 3 240/11 3 390/11 4 220/11 7 380
Applicable: BMW
316 1.6 E36 (93-99), 316 1.6 E36 Compact (94-01),
316 1.6 E46 (98-04), 316 1.6 E46 (99-01) 318 1.8 E30 16v (89-91),
318 1.8 E36 S/Coupe (92-98), 318 1.8 E36 (93-99),
318 1.8ti E36 (94-98), 318 1.8 E36 S/Coupe (96-99),
318 1.8ti E36 Compact (96-01), 318 1.8 E46 (98-04),
320 2.0 E36 24v (91-97), 325 2.5 E36 24v (91-97),
518 1.8 E34 (94-96), 520 2.0 E34 24v (89-96),
525 2.5 E34 24v (89-96), 535 3.5 E39 (96-00) 540 4.0 E39 (96-00),
735 3.5 E38 (96-02), 740 4.0 E38 (96-02), 750 5.0 E32/38 (87-02),
840 4.0 E31 (93-99), 850 5.0 E31 (90-99), Z3 1.9 (96-99),
Z3 1.9 (99-03)
Engine code: 164E2, 164E3 M43, 184E2, 184S1, 194E1 M43, 194S1 M44, 206S2, 256S1, 256S2, 358S1, 448S1 M62, M70, M73, S70...

Camshaft locking tool SAAB & OPEL, 9G1204

Applicable:

For Saab & Opel

- Vauxhall cavalier 2.5L, Calibra 2.5L

- Vectra 2.5/3, Olit, Sintra 3 LIT

- SAAB 900 2.5, 9000 3.0 V6

Made in Frce, Taiwan

VW 2.8L – Camshaft Locking Tool, 50950

Designed to lock the camshaft of the 2.8L diesel engines used in the popular Volkswagen LT van.
To check and adjust the valve time.
Applicable: Volkswagen LT Van 1997 to 2006 2.8lt.
Engine codes: AGK 1997 to 2006, ATA 1999 to 2006, AUH 2001 to 2006, BCQ 2002 to 2006.
OEM number 3445

Made in China

Setting Tool Kit 1.0 Turbo 3 Cylinder Petrol Engine for Ford, 50170

Introduced in 2011, Ford 1.0 turbo, 3 cylinder, Ecoboost (SCTi) petrol engine fits in the various car and light commercial vehicle across Ford range.
The engine features a wet timing belt (belt in oil) that runs between the crankshaft and the twin camshaft VVT sprocket.
The timing belt is a conventional arrangement, the exception is being that the belt is encases in the engine and runs in oil in a similar set-up as a chain engine.
Contents:
Camshaft Locking Tool Set.
Camshaft VVT Adjustment Tool Set.
Crankshaft Setting Pin.
Flywheel Locking Tool.
Tensioner Locking Pin.
Crankshaft Pulley Positioning Pin.
OEM tool No.: 303-1606, 303-1605, 303-1604, 303-1602, 303-1054, 303-732.
Applicable: 
C-MAX, Focus, Grand C-MAX, EcoSport, Fiesta, B-MAX, Tourneo Connect, Transit Connect.
Engine codes: 
M1DA, M2DA, M1JC, M1JE, SFJA, SFJB, M2GA, P4JA, P4JB, XMJA, XMJB.

Camshaft tools  - BMW V8 M60; M62, 50609

Description: 
Camshaft locking tool for BMW 3.0, 3.5, 4.0, 4.4, 4.6 – 8 cylinder DOHC V32 petrol engine.
Crankshaft locking tool for BMW 3.0, 3.5, 4.0, 4.4, 4.6 – 8 cylinder DOHC V32 petrol engine.
Application: BMW
530i LCi (E34, 535i(E39), 535i LCi(E39), 730i(E32), 730IL LCi(E32), 730i(E38), 730iL(E38), 540i LCi(E34), 740i LCi(E32), 740Il LCi(E32), 740i(E38), 740i A(E38), 740iL(E38), 840Ci(E31), 735i(E38), 735iL(E38), 540i(E39)
Engine Code:
M60 B30, M60 B40, M62 B35, M62 B44, M62 B46, M62TU B35, M62TU B4 ...