AUTOMOTIVE SPECIALTY TOOLS

VAG 1.8L & 2.0L TFSi/TSi - Crankshaft Pulley Holding Tool, 50739

Used for holding crankshaft pulley/vibration damper when crankshaft central bolt is loosened or tightened.
Specially shaped & hardened pins help prevent the tool falling out when under load.
Application:
1.8L & 2.0L TFSi/TSi petrol engines found in the VAG vehicles (from 2006 onwards).
Overall length 34" (863 mm)
OEM#: T10355

Made in China

Ford 2.0 TDCi Ecoblue Diesel - Engine Timing Tool Set, 50537

Features:

Designed to fit the new generation Ford 2.0 TDCi EcoBlue engine which features an innovative "belt in oil" design where the synchronous drive belt is sited inside the oiled area of the engine.

Content:

Flywheel Holding Tool - OEM №: 303-1643

Crankshaft Alignment Tool - OEM №: 303-1637

Installation Cups - OEM №: 303-1650

Alignment Pins 6 mm (3x)

Applicable:

Ford Focus (since 2018)

Ford Galaxy (since 2018)

Ford S-Max (since 2018)

Ford Ranger (since 2019)

Ford Transit (2016-2018)

Ford Transit Custom (2016-2019)

Ford Tourneo Custom (2016-2018)

Engine Codes:

2.0 TDCi: YLFS, YMFS, YNFS, YLF6, YMF6, YNF6, YLR6, YMR6, YNR6

Made in China

BMW N20 N26 1, 2, 3, 4 Series - Balance Shaft & Oil Pump Alignment Tool Kit, 50790

Function : For aligning the balancer shaft and holding the chain sprocket for removing and installing the oil pump or chain during chain repairs. Constructed with high standard Steel, which has an unparalleled lifespan with great durability.
Applications:
BMW 1 Series (2012-2016), 2 series (2014-2016), 3 series (2012-2016), 4 series (2014-2016), X1 (2011-2015), X3 (2011-2017), X4 (2014-2017), Z4 (2011-2017)
Engine codes: N20 and N26 1.6L/2.0L petrol engines
OEM No. 2 212 825, 2 318 117, 11 4 120

Made in China

Engine Timing Tool Kit Vauxhall/Opel, Saab, Chevrolet 2.0; 2.4 – diesel engines, 50210

This kit contains all the engine synchronization tools for OPEL / Vauxhall, SAAB, Chevrolet 2.0; 2.4.
Applicable to the following car models:
GM / Vauxhall / Opel: Astra, Insignia, Antara Turbo
Chevrolet: Captiva, HHR, Malibu
Saab: 9-5
Engines:
2.0L: LHU (A20NFT) / LTG (A20NHT) / LDK (A20NHT)
2.4L: A24XE / A24XF / LE5 / LE9
OEM No.: EN-48585 / EN-43653 / J43653 / EN-955-10 / KM 955 / EN-955-20 / KM 955-20 / EN-45027-1 / J-45027-1 / J-45027-2 / EN45027-2 / EN-45027 / EN-49212 / EN-49212-1 / EN-49212 / EN-49212-2 I / EN-48953
Contents:
Crankshaft pulley alignment tool - OEM EN-48585
Flywheel holding tool - OEM EN-43653, J43653
Tensioner retaining pin 2.5 mm - OEM EN-955-10, KM 955
Tensioner locating pin 4.0 mm - OEM EN-955-20, KM 955-20
Tension plunger resetting tool - OEM EN-45027-1, J-45027-1
Tension plunger holder - OEM J45027-2, EN45027-2, EN-45027
Camshaft locking tool (left side) - OEM EN-49212, EN-49212-1
Camshaft locking tool (right side) - OEM EN-49212, EN-49212-2
Camshaft adjuster holding tool - OEM EN-48953

Made in China

63 pcs Fiat/ Alfa/ Lancia engine timing tool kit
Description:
This is the ultimate master Engine Timing Tool Kit for Alfa Fiat Lancia.
Comprehensive engine timing tool set for Italian cars.

Contents:
Includes all tools required for camshaft alignment, tensioning and crankshaft alignment to cover a wide range of petrol and diesel engines packed in blow moulded case with bespoke foam insert with perfect indents for every tool in the collection.
Suitable For:
Contains important tools for adjustment: flywheel, crankshaft, camshaft, fuel injection pump shaft, belt pulley, tensioning of the timing belt, complete classification chart included fits varoius engines.
- Alfa Romeo vehicle with 1.4;1.6 1.8, 2.0 and 3.0L 4 cylinders; 6-cylinder engine Alfa Romeo 145, 146, 147, 155, 156, 164, 166, GTA, GTV and Spider GT
- Fiat, Lancia vehicle with 1.2, 1.4, 1.6, 1.8 And 2.0L 4; 5-cylinder engine Fiat Panda, Punto, Palio, Siena, Bravo, Brava, Stilo, Marea, Multipla, Barchetta, Lancia Dedra, Delta, Kappa and Lydra.

Made in: China

Crankshaft Locking Tool W/Steel Plate, 50315
Description:
2.0 PD TDI Diesel engines with oval crankshaft pulley (non-bored engines).
Contents: injection pump drive pulley locking pin and belt tensioner locking plate.
Application:
•Models:
Audi: A4, A6
Seat: Alhambra, Altea, Leon, Toledo
Skoda: Octavia, Octavia RS, Superb
VW: Golf, Jetta, Passat, Sharan, Tiguan, Touran
•Engine codes: BDK, BKE, BLB, BMA, BMM,
BMP, BMR, BNA, BP ...

Engine timing tool kit for Renault, 50089

This new camshaft pulley setting tool holds two pulleys in place while changing the cam belt and correct engine timing to be performed when changing the timing belt.
Installing and removal of camshaft / variable camshaft timing unit.
Checking and adjustment of timing.
Petrol engine:
Twin camshaft engine: 1.2, 1.4, 1.6, 1.8, 2.0 16V, 2.5 20V.
Diesel engine: 1.9D/TD/dTi, 2.2D/TD, 2.5D, 2.8dTi, 1.5dCi, 1.9dCi, 2.2dCi, 2.5dCi
Applicable:
Renault 16V & K4J, K4M & F4P, F4R / 1.4 16V K4J / 1.6 16V K4M / 1.8 16V F4P & F4R(Langunall).
Suitable for:
1.2 (Engine code D7F) e.g. Clio and Twingo
1.2 / 1.4 / 1.6 (Engine code E5-E7F, E7J, K7M) e.g. Clio, Megane, Scenic, Kangoo
1.4 / 1.6 16V (Engine code K4J, K4M ab 1998) e.g. Clio, Clio Sport, Megane, Scenic, Laguna, Espace
1.7 / 1.8 / 2.0 (Engine code F1N - F3N, F3P, F2R - F3R) e.g. Clio, Megane, Scenic
1.8 / 2.0 16V (Engine code F4P, F4R ab 1998) e.g. Clio, Clio Sport, Megane, Scenic, Laguna, Espace
1.8 / 2.0 16V (Engine code F7P, F7R) e.g. Clio Williams, Megane, Spider, R19
2.0 / 2.2 (Engine code J5R - J7R, J5T) e.g. Safrane, Espace, Master, Traffic
2.0 16V / 2.5 20V (Engine code N7Q, N7U) e.g. Laguna and Safrane
And identical Volvo engines (Engine code B16, B18, B20) e.g. Volvo 440, 460, 480

Suitable for the following diesel engines:
1.9/2.5/2.8 Engine code F8M, F8Q, G8T, J8S, F9Q, S8U, S9U, S9W e.g. Clio, Laguna, Megane, Kangoo, Espace, Master, Traffic
Identical diesel engines e.g. Opel Arena, Movano and Volvo S40, V40 etc.

Made in China

Crankshaft Turning Tool, 50535

Used for turning the crankshaft pulley.
With 1/2" drive, 22mm square, and 12mm rotating pivot pin.
Application:
Audi A6 2005 and up
Audi A8 2003 and up
Engine: 6 cylinder 2.4, 3.2L FSI.
OEM №: T40058

Made in China

Volvo Ford 1.8 2.0 - Crankshaft Pulley Holding Tool, 50521

Also suitable compatible with some Volvo vehicles.

Applicable:

Ford: C-MAX (07-10), Fiesta (95-12), Focus (98-11), Focus C-MAX, Galaxy (06-12), Mondeo (93-12), S-MAX (06-12), Transit (06-12)

Volvo: C30 (06-12), S40 (06-12), S80 (07-11), V50 (04-12), V70 (07-11)

Engine Codes: AOBA, AOBC, AODA, AODB, AODE, AOWA, AOWB, B4184S8, B4184S11, B4204S3, B4204S4, CDBB, CGBA, CGBB, CHBA, CHBB, CJBA, CJBB, CSDA, CSDB, GZFA, GZFB, GZFC, N4JB, Q7DA, QQDA, QQDB, QQDC, SEBA, SEWA, SYDA, TBBA, TBBB, TBWA, TBWB

OEM No.: 49 B011 105

Made in China

BMW B37/B38 – Balance Shaft Removal Alignment Tool, 50896

Basic tools for required to remove, replace and time the balance shaft on the new BMW 1.5, 1.2 and 1.5 petrol engines.
Application: Mini Clubman 2015 - 2017, Mini Convertible 2016 - 2017, Mini Clubman 2015 - 2017, BMW 1 and 3 series 2015 - 2017, 2 series 2014 - 2017, X1 2015 - 2017, i8 2015 - 2017
Engine codes:
B37 (diesel engines), B38 (petrol engines)
OEM tools: 2,288,943, 2,288,942 and 2,358,646

Made in China

Engine timing tool kit - OPEL/Vauxhall 2.0 CDTI, 50171

Designed for: To removal and replace the Opel / Vauxhall 2.0 CDTi camshaft drive belt. The kit also includes flywheel locking tools for vehicles equipped with an automatic transmission.
Applicable: Opel / Vauxhall 2.0 CDTi - LFS / B20DTH, LFS / B20DTR (2.0 CDTi от 2014 г.).
Models: Antara (от 2016 г.), Cascada (от 2015 г.), Insignia-A / Country Tourer (2014-2017), Insignia-B / Country Tourer (от 2017 г.) и Zafira-C Tourer (от 2014 г.); CDTi EcoFLEX Blueinjection
OEM tool No.: EN 51413, EN 955-2, EN 51412, EN 51414, EN 51411

Made in China

Engine Timing Tool Set-Mercedes M133 / M270 / M274, 50858

Designed for disassembling and assembling of the camshafts on vehicles fitted with the chain driven 1.6/2.0 direct injection petrol engine.
Content:
Camshaft clamping assembly (chain end) + fixing bolts (OEM 270589006100)
Camshaft clamping assembly (gearbox end) + fixing bolts (OEM 270589006100)
Small diameter camshaft blocks (OEM 270589006100)
Special Star socket bit T100 for the camshaft pulleys (OEM: 270589006100)
Application: 
Mercedes-Benz M133, M270, M274. 
These engines are found in the late A Class, B Class CLA, C Class and E Class vehicles.
Models:
Mercedes A-Class 176 1.6/2.0 (since 2012)
Mercedes B-Class 242/246 1.6/2.0 (since 2012)
Mercedes CLA 117 1.6/2.0 (since 2012)
Mercedes C-Class 204 1.6/2.0 (since 2011)
Mercedes C-Class COUPÉ 1.6/2.0 (since 2011)
Mercedes E-Class 212 1.6/2.0 (since 2011)
Engine Codes: M133; M270; M274

Made in China

VW, AUDI Crancshaft locking pin M14x1.5, 50766

Features:
To lock the crankshaft at the TDC position

VAG crankshaft Pulley/Damper Puller, 50506

This removal tool must always be used to separate the vibration damper from the gear wheel of the crankshaft. Working on 4 cylinder common 2.0L, required for the damage free removal of the vibration damper with internal thread.
Applications:
Volkswagen T6/Transporter (from 2017).
Engine: 4 cylinder common rail 2.0L.
OEM №: T50071.

Made in China

Citroen/Peugeot/Fiat/Ford - Belt Tension Wrench, 50516

Facilitates the pre-tensioning and locking of V-ribbed belt tensioners.

For the removal / installation of the V-ribbed belt in - situ on the vehicle even in very limited space condition.

Suitable for Citroën / Peugeot / Fiat / Ford 1.4L and 1.6L diesel engines.

Applications include: Citroën, Peugeot, Ford & Fiat 1.4 & 1.6 diesel engines.

Citroën: Berlingo, C1, C2, C3, C3 Picasso, C3 Pluriel, C4, C4 Picasso, C5, DS3, DS4, Xsara & Xsara Picasso.

Peugeot: Partner III, 206, 207, 308, 508, 3008, 5008.

Engines covered include DV4 & DV6 engines.

Engines: 1.4-1.6D

OEM No.: 0188-Z , G.0194-E3

Made in China