WHEELS TELLURE ROTA

Polyamide 6 wheel, fixed bracket, 325103

Wheel description
Polyamide 6 solid wheel.
Plain bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
Axle
Axle composed of ground steel bush with bolt and nut.
Fixed bracket
Fixed bracket. The fork is made of pressed steel zinc plated finish.

Load capacity: 60 kgs
Wheel diameter: 60 mm
Wheel width: 22 mm
Bracket size: 60х60 mm
Over height: 83mm

Made in Italy

Polyamide 6 wheel, swivel top plate bracket, 324103

Wheel description:
Polyamide 6 solid wheel. Plain bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
Axle:
Axle composed of ground steel bush with bolt and nut.
Swivel top plate bracket:
The plate, the ball rice ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race with dust protection granted by the particular plate configuration.
The king pin is integral with the top plate and duly rivetted.
Load capacity: 60 kgs
Wheel diameter: 60 mm
Width: 22 mm
Top plate size: 60x60 mm
Overal height: 83 mm

Made in Italy

Polyamide 6 wheels, swivel top plate bracket, 324101

Wheel description
Polyamide 6 solid wheel.
Plain bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
Axle
Axle composed of ground steel bush with bolt and nut.
Swivel top plate bracket.
The plate, the ball rice ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race with dust protection granted by the particular plate configuration. The king pin is integral with the top plate and duly rivetted.

Load capacity: 30 kgs
Wheel diameter: 40 mm
Width: 17 mm
Top plate size: 42x42 mm
Overal height: 61 mm

Made in Italy

Polyamide 6 wheel, fixed bracket, 325101

Wheel description
Polyamide 6 solid wheel.
Plain bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
Axle
Axle composed of ground steel bush with bolt and nut.
Fixed bracket
Fixed bracket. The fork is made of pressed steel zinc plated finish.

Load capacity: 30 kgs
Wheel diameter: 40 mm
Wheel width: 17 mm
Bracket size: 55х25 mm
Over height: 61mm

Made in Italy